ASTM A815 UNS S32205

UNS S32205 buttweld fittings chemical composition and PREN

As an ASTM A815 UNS S32205 Fittings Supplier in Delhi, we verify each heat against these limits.

• CCarbon≤ 0.030
• MnManganese≤ 2.00
• PPhosphorus≤ 0.030
• SSulphur≤ 0.020
• SiSilicon≤ 1.00
• NiNickel4.5–6.5
• CrChromium22.0–23.0
• MoMolybdenum3.0–3.5
• NNitrogen0.14–0.20
• FeIronBalance

• =PREN = Cr + 3.3 Mo + 16 N, the pitting index for duplex.
• ↑Calculated from the A815 limits above, the S32205 PREN lands between 34.1 and 37.8.

Weight percent heat analysis from ASTM A815 Table 1; the PREN range above is calculated.

ASME SA815 S32205 Fittings Specification

We finish and mark to drawing as an ASTM A815 UNS S32205 Fittings Supplier in Mumbai for projects.

• Radius and Angles

  • LR 1.5D and SR 1D elbows
  • 45°, 90° and 180° turns
  • Concentric or eccentric reducing

• End Preparation

  • 37.5° bevel to ASME B16.25
  • Plain or square ends on request
  • Root face matched to pipe wall

• Surface Finish

  • Pickled and passivated
  • Scale-free inside and outside
  • Free of iron pick-up

• Marking

  • Grade, class and heat number
  • Size and schedule stencilled
  • Low-chloride marking ink

• Packing

  • Plastic end caps fitted
  • Wooden cases, no carbon steel contact
  • Heat-wise packing list

• Sour Service

  • NACE MR0175 / ISO 15156-3
  • NACE MR0103 for refinery units
  • Compliance stated on request

Will one S32205 fitting satisfy an S31803 drawing?

As an ASTM A815 UNS S32205 Fittings Supplier in Kuwait, we ship dual-marked heats for oilfield drawings.

Every S32205 limit sits inside the S31803 window, so one heat carries both grade stamps.

We also stock ASTM A815 UNS S31803 fittings from the same ASTM A815 (S31803/S32205) heats.

SA815 UNS S32205 shapes we form and stock

As an ASTM A815 UNS S32205 Fittings Supplier in Pune, we form each shape seamless or welded.

• 

  90° ASTM A815 S32205 Elbow

  • Radius: LR 1.5D and SR 1D
  • Class: WP-S or WP-WX
  • Picked for: Seawater line turns
• 

  45° ASTM A815 UNS S32205 Elbow

  • Radius: LR 1.5D
  • Size: 1/2″ to 24″
  • Picked for: Gentle offsets
• 

  A815 UNS S32205 Tee

  • Branch: Same as run
  • Make: Seamless or welded
  • Picked for: Equal flow split
• 

  Reducing Duplex Steel S32205 Tee

  • Branch: Smaller than run
  • Make: Extruded branch
  • Picked for: Instrument take-offs
• 

  Concentric ASTM A815 Gr S32205 Reducer

  • Axis: Common centre line
  • Length: B16.9 H dimension
  • Picked for: Vertical risers
• 

  Eccentric UNS S32205 Reducer

  • Axis: Flat side kept
  • Length: B16.9 H dimension
  • Picked for: Pump suction
• 

  A815 S32205 Pipe Cap

  • Also called: S32205 end cap
  • Marking: Caps ASME SA815 stamped
  • Picked for: Dead ends, headers
• 

  ASME SA815 UNS S32205 Stub End

  • Pattern: Long, ASME B16.9
  • Also called: S32205 lap joint stub end
  • Picked for: Frequent dismantling
• 

  ASME SA815 S32205 Collar

  • Pattern: Short, MSS SP-43
  • Wall: SCH 5S and 10S
  • Picked for: Light-wall skids
• 

  SA815 UNS S32205 Cross

  • Branches: Equal or reducing
  • Standard: ASME B16.9
  • Picked for: Four-way manifolds
• 

  SA815 S32205 Pipe Bend

  • Radius: 3D and 5D on order
  • Source: S32205 pipe
  • Picked for: Low-pressure-drop runs
• 

  SA815 S32205 180° Return Bend

  • Radius: LR 1.5D and SR 1D
  • Standard: ASME B16.9
  • Picked for: Heat exchanger loops

For warmer brine, compare our ASTM A815 UNS S32750 and UNS S32760 fittings ranges.

WP-S, WP-WX or CR: which A815 class fits your inspection plan?

We confirm the class on every offer as an ASTM A815 UNS S32205 Fittings Supplier in Saudi Arabia.

ASTM A815 WP S32205 fittings carry a class suffix showing how welds were checked.

• WP-SSeamlessNo weld seam
• WP-WWeldedFabrication welds radiographed
• WP-WXWelded, full RTEvery weld radiographed
• WP-WUWelded, full UTEvery weld ultrasonically tested
• CRCR S32205 light wallMSS SP-43, no NDE required
• A960Common requirementsGeneral rules for every class

Gulf specs favour WP-S or WP-WX, while A815 WPX UNS S32205 enquiries mean WP-WX.

UNS S32205 elbow weight chart

Shipyards plan loads with this chart from us as an ASTM A815 UNS S32205 Fittings Supplier in Singapore.

This buttweld fittings weight chart scales STD carbon steel values to 7.80 g/cm³ duplex density.

A815 S32205 WP-S seamless fittings mechanical properties

As an ASTM A815 UNS S32205 Fittings Supplier in Vadodara, we test tensile and hardness on each heat.

• 655MPaTensile strength, min
• 450MPaYield strength, min
• 20%Elongation, min
• 290HBHardness, max

S32205 WP-W welded fittings yield strength matches WP-S at 450 MPa in ASTM A815.

SA 815 S32205 welded fittings density and temperature limit

• ρ
  Density7.8 g/cm³ (0.283 lb/in³)
• ≈
  Melting range1385–1440°C (2525–2625°F)
• E
  Modulus of elasticity200 GPa (29 × 10⁶ psi)
• α
  Thermal expansion13.0 µm/m·°C, 20–100°C
• ½
  MicrostructureAbout 50% austenite and 50% ferrite
• ≤
  Upper service limit316°C (600°F) maximum

These are typical mill values for annealed 2205 duplex, not ASTM A815 acceptance limits.

ASME B16.9 S32205 fittings dimensions

We check sizes against this chart as an ASTM A815 UNS S32205 Fittings Supplier in Hyderabad.

ASTM A815 UNS S32205 dimensions follow ASME B16.9; S32205 end cap dimensions use column E.

WPS S32205 buttweld pipe fittings equivalent grades

As an ASTM A815 UNS S32205 Fittings Supplier in Bangalore, we map grades your drawing names.

• 
  UNSS32205
• 
  ASTM A815 fittingsWP S32205
• 
  ASTM A182 forgingsF60
• 
  DIN material numberDIN 1.4462
• 
  EN nameX2CrNiMoN22-5-3
• 
  AFNORZ2CND22-5Az
• 
  JISSUS329J3L
• 
  GB022Cr23Ni5Mo3N
• 
  Swedish SS2377

EN 1.4462 and SUS329J3L cover both S31803 and S32205, so confirm before you substitute.

Tests and PO checklist for ASTM A815 UNS S32205 fittings

As an ASTM A815 UNS S32205 Fittings Supplier in Qatar, we add these tests to LNG orders.

1. Grade and classWP S32205 plus class suffix
2. Size and wallNPS, schedule, radius and quantity
3. TestsSupplementary, A923, G48 or PMI
4. DocumentsEN 10204 3.1 or 3.2

A815 supplementary tests S1 to S7 cover analysis, tension, IGC, UT, micrographs, finish and PT.

Plants that specify duplex S32205 fittings

We serve Telangana chemical plants as an ASTM A815 UNS S32205 Fittings Supplier in Secunderabad.

• Chemical processingAcid and chloride service
• Oil and gasFlowlines and produced water
• DesalinationSeawater intake and brine
• Heat exchangersShell and channel piping
• MarineBallast and seawater cooling
• Pulp and paperBleach plant piping
• Pollution controlFlue gas scrubber lines
• Pressure vesselsNozzles and process pipework

Reading an S32205 fittings pressure rating chart

We send wall data for pressure checks as an ASTM A815 UNS S32205 Fittings Supplier in Sharjah.

That is why an S32205 fittings pressure rating chart follows the matching pipe table.

S32205 pipe fittings price list: what moves the rate

As an ASTM A815 UNS S32205 Fittings Supplier in Mangalore, we price refinery orders on size and class.

• Size and scheduleSets S32205 reducing tee price
• ClassWP-WX costs above WP-S
• Ni and Mo surchargeChanges every month
• Tests and TPIA923, G48 and 3.2

We quote ASTM A815 UNS S32205 price per piece, valid for the current surcharge month.

Shipping S32205 fittings to Jebel Ali, Durban, Mombasa and Canada

As an ASTM A815 UNS S32205 Fittings Supplier in UAE, we book regular Jebel Ali sailings.

• UAEJebel Ali, 6–7 days
• Saudi ArabiaDammam, 7–8 days
• QatarHamad Port, about 7 days
• Oman5–6 days
• Bahrain9–10 days
• South AfricaDurban, quoted per booking
• KenyaMombasa, quoted per booking
• CanadaVancouver or Montreal, per booking

• ✓Every lot ships with invoice, packing list, certificate of origin and EN 10204 3.1 MTC.
• !Canadian pressure piping may need CRN-registered fittings, so confirm this before you place orders.
• !Kenyan importers should check KEBS PVoC rules; we supply the test documents they need.

ASTM A815 UNS S32205 fittings buyer questions

As an ASTM A815 UNS S32205 Fittings Supplier in Dubai, we answer these questions for contractors daily.

Countries and cities receiving our S32205 fittings

We dispatch to these markets.