Incoloy 825 Fittings
ASTM B366 UNS N08825 Elbow
DIN 2.4858 Tee
Alloy 825 Reducer
Table of Content
- Incoloy 825 fittings specifications
- Operating temperature of Incoloy 825 fittings
- Nickel 825 welded fittings hardness
- Magnetic permeability of nickel 825 buttweld fittings
- Werkstoff nr 2.4858 fittings thermal conductivity
- Corrosion resistance of 825 Incoloy fittings
- Crevice corrosion resistance of DIN 2.4858 pipe fittings
- ASTM B366 UNS N08825 elbow type
- DIN 2.4858 tee type
- Nickel alloy 825 reducer type
- ASME SB366 UNS N08825 end cap & stub end type
- Alloy 825 pipe bend types
- Tensile strength of B366 UNS N08825 butt weld fittings
- Ni 825 weld fittings chemical composition
- Nickel alloy 825 butt welding fittings equivalent material
- Incoloy 825 welded pipe fittings heat treatment
- UNS N08825 butt welded fittings mechanical properties
View ASTM B366 UNS N08825 elbow specifications
Incoloy 825 fittings specifications
High performing DIN 2.4858 tee are manufactured in seamless/ welded construction, check nickel 825 welded fittings operating temperature.
Operating temperature of Incoloy 825 fittings
- 1600 and 1800°F
- 870 and 980°C
Buy nickel alloy 825 reducer and pipe bend in all sizes and thicknesses, hardness of Alloy 825 buttweld pipe fittings in Rockwell & Brinell
Nickel 825 welded fittings hardness
- Rockwell B = 135-165
- Brinell = 327 (max)
Magnetic permeability of nickel 825 buttweld fittings
- 1.005 Oersted (μ at 200H)
Werkstoff nr 2.4858 fittings thermal conductivity
- 76.8 BTU/hr/ft2/ft-°F (78°F)
- 11.3 W/m-°K (26°C)
Corrosion resistance of 825 Incoloy fittings
| Corrosion Rate in Boiling | Laboratory Sulfuric Acid | Solution Mils/Year (mm/a) |
|---|---|---|
| 10% | 40% | 50% |
| 20 (0.5) | 11 (0.28) | 20 (0.5) |
Crevice corrosion resistance of DIN 2.4858 pipe fittings
| Magnesium Chloride (Boiling) | Lithium Chloride (Boiling) | Sodium Chloride (Boiling) |
|---|---|---|
| 42% | 33% | 26% |
| Mixed | Resist | Resist |
ASTM B366 UNS N08825 elbow type
Alloy 825 45 deg elbow
Incoloy 825 90 deg elbow
ASTM B366 UNS N08825 180 deg elbow
B366 UNS N08825 long radius elbow
Nickel 825 short radius elbow
Ni 825 pipe elbow
ASME SB 366 UNS N08825 equal tee
Inconel 825 reducing tee
DIN 2.4858 lateral tee
Nickel Alloy 825 concentric reducer
825 Incoloy eccentric reducer
ASME SB366 UNS N08825 end cap & stub end type
Incoloy alloy 825 end caps
825 nickel alloy long stub end
ASTM B366 UNS N08825 short stub end
Ni 825 45 degree bend
Nickel Alloy 825 90 deg bend
Incoloy 825 180 deg pipe bend
Alloy 825 nickel long radius bend
SB 366 N08825 short radius bend
Before ordering compare ASME SB366 UNS N08825 end cap price with the different supplier in India, check B366 UNS N08825 weld fittings tensile strength
Tensile strength of B366 UNS N08825 butt weld fittings
- PSI = 96,000 (min.)
- MPa = 662
Contact us for more information about the Nickel Alloy 825 seamless pipe fittings chemical composition, and heat treatment of Incoloy alloy 825 butt welded fittings
Ni 825 weld fittings chemical composition
| C | Mn | Si | S | Al |
|---|---|---|---|---|
| 0.05 maximum | 1.00 maximum | 0.5 maximum | 0.03 maximum | 0.02 maximum |
| Cu | Fe | Ni | Cr | Ti |
| 1.50 – 3.00 | 22.00 minimum | 38.00 – 46.00 | 19.50 – 23.50 | 0.06 – 1.20 |
Nickel alloy 825 butt welding fittings equivalent material
| UNS | WERKSTOFF NR. | JIS | BS |
|---|---|---|---|
| N08825 | 2.4858 | NCF 825 | NA 16 |
Incoloy 825 welded pipe fittings heat treatment
- Stabilise annealed at 940°C
UNS N08825 butt welded fittings mechanical properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|
| 8.14 g/cm3 | 2550 °F (1400 °C) | MPa – 220, PSI – 32,000 | 3 % |
| Specific Heat | Electrical Resistivity | Modulus of Elasticity | Magnetic Permeability |
| 0.105 BTU/lb-°F | 678 Ohm circ mil/ft (78°F) | 28.3 psi x 106 (100°F) | 1.005 Oersted (μ at 200H) |
Top 8 Reasons to Choose Ramesh Group for High Pressure Applications
- ADNOC approved manufacturer and supplier of seamless fittings and forged steel flanges
- Supply industrial steel piping products in Europe as per CBAM requirements
- Exporter of high performance weld fittings suitable for corrosion resistant environment
- Distributor of butt welding fittings for Marine application as per MTC EN 10204 3.1/ 3.2
- All pipe flange comes with NACE MR0175 and pressure class 150 to 2500 as per ASME B16.5.
- Over 250 Fabricators and traders in Middle East and European countries import prime quality BLRF, SORF and WNRF flanges because our material is accepted in Abu Dhabi National Oil Company
- Supplying SMLS elbow, tee, reducer and end cap to Stockist and wholesaler of piping materials in Saudi Arabia at Resale price as per ASME B16.9.
- Keep custom sizes Ex stock of standard sizes with stockholders in USA and Mexico for urgent requirements in replacement situations