Inconel Fittings
Inconel Pipe Elbow
Nickel alloy 600 Tee
Superalloy 625 reducer
Table of Content
- Inconel fittings specifications
- Inconel buttweld fittings price list
- Top 6 type of Inconel elbows
- Most selling types of Inconel pipe tee
- Demanded types of Inconel seamless reducer
- Popular types of Inconel alloy welded cap & stub end
- Types of Inconel pipe bend
- Inconel 625 elbow thicknesses
- Inconel 625 pipe fittings temperature range
- Heat treatment of Inconel alloy 600 welded fittings
- Melting point of Alloy 625 fittings
- Inconel pipe fittings chemical composition
- 625 Inconel buttweld pipe fittings corrosion resistance
- Rockwell hardness of Inconel 600 pipe fittings
- Maximum operating temperature of Inconel 625 fittings
- Nickel content of Inconel BW fittings
- Inconel butt welding fittings equivalent
- Mechanical properties of Inconel weldable pipe fittings
ADNOC-approved Alloy 625 pipe elbow manufacturer in India, check specification
ADNOC approved Inconel fittings manufacturer With MTC test, Inconel 625 elbow made form high nickel alloys to provide long life service.
Inconel fittings specifications
Buy 600 Inconel buttweld fittings at the best price in Mumbai, Get all sizes and types as per ASME B16.9
Inconel fittings manufacturer in India As Per ASME B16.9, Get Inconel buttweld fittings in elbow, tee, reducer with SCH 40 to SCH 180 at affordable price in India.
Inconel buttweld fittings price list
- Method = Seamless (SMLS)
- Material = Inconel
- Grade = 625
- Type = 90 degree elbow
- Radius = Long
- Method= SMLS
| Size | Types & Method | Price in UAE Dirham (AED) per unit | Price in US (Dollar) per unit |
|---|---|---|---|
| SCH x 40 ¾” | 90 Degree Elbow (Long Radius) | 65.00 | US $17.70 |
| SCH 40 x 1” | – | 89.00 | US $24.23 |
| SCH 40 x 1.1/4” | – | 102.00 | US $27.77 |
| SCH 40 x 1.1/2” | – | 134.00 | US $36.49 |
| SCH 40 x 2” | – | 159.00 | US $43.29 |
| SCH 40 x 2.1/2” | – | 197.00 | US $53.64 |
| SCH 40 x 3” | – | 243.00 | US $66.17 |
| SCH 40 x 4” | 90 Degree Elbow (Long Radius) | 298.00 | US $81.14 |
Inconel 625 45 deg elbow
Alloy 600 90 deg elbow
Nickel alloy 625 180 deg elbow
Inconel alloy 600 long radius elbow
625 Inconel short radius elbow
Inconel pipe elbow
Most selling types of Inconel pipe tee
Inconel 600 equal tee
Alloy 625 reducing tee
625 nickel alloy lateral tee
Demanded types of Inconel seamless reducer
Inconel 625 Grade 2 concentric reducer
Alloy 600 eccentric reducer
Popular types of Inconel alloy welded cap & stub end
Inconel end caps
Nickel 600 long stub end
Alloy 625 Grade 1 short stub end
625 alloy 45 degree bend
Nickel alloy 600 90 deg bend
Inconel 625 nickel alloy 180 deg pipe bend
Inconel long radius bend
Alloy 625 short radius bend
Wide stock of Nickel alloy 600 tee available with various thicknesses, and Inconel 625 pipe fittings temperature range
Customized Size Inconel fittings manufacturer, Inconel 600 pipe fittings have good corrosion resistance and high rupture strength for chemical processing.
| Schedule 10 | Schedule 20 |
|---|---|
| SCH 30 | STD Wall |
| SCH 40 | SCH 60 |
| EXT Hvy | SCH 80 |
| SCH 100 | SCH 120 |
| SCH 140 | SCH 160 |
| SCH 180 | XX Hvy |
Inconel 625 pipe fittings temperature range
- Cryogenic to (1800°F)
- (982°C)
Choose a highly skilled Superalloy 625 reducer supplier in Mumbai, corrosion resistance, and view heat treatment of Inconel alloy 600 welded fittings
Ramesh Group is a renowned Inconel fittings manufacturer in India, Inconel welded fittings used for extreme temperature environments.
Heat treatment of Inconel alloy 600 welded fittings
| Condition | Cooling | Temperature | Time | Type |
|---|---|---|---|---|
| Annealed | Air | 500 – 700°F (260 – 370°C) | 0.5 – 1hr | Stress Relieve |
Learn about the Nickel 625 seamless pipe fittings melting point, chemical composition, and corrosion resistance of 625 nickel alloy end cap
Melting point of Alloy 625 fittings
- 1290-1350°C
- 2350-2460 °F
Inconel pipe fittings chemical composition
| Element | Inconel 600 fittings | Inconel 625 fittings |
|---|---|---|
| Si | 0.50 (max.) | 0.50 (max.) |
| S | 0.015 (max.) | 0.015 (max.) |
| Mn | 1.00 (max.) | 0.50 (max.) |
| Ni | 72.00 (min.) | 58.0 (min.) |
| Cr | 14.00 – 17.00 | 20.0 – 23.0 |
| Cu | 0.50 (max.) | – |
| Fe | 6.00 – 10.00 | 5.0 (max,) |
| C | 0.15 (max.) | 0.10 (max.) |
625 Inconel buttweld pipe fittings corrosion resistance
Impingement Attack by Seawater at 150 ft/sec (45.7 m/s)
| Material | Corrosion Rate In mpy | Corrosion Rate In mm/a |
|---|---|---|
| Alloy 625 | Nil | Nil |
Four 24-hour Tests in Boiling Acetic Acid
| Material | Acetic Acid Concentration | Corrosion Rate In mm/a | Corrosion Rate In mm/a |
|---|---|---|---|
| Inconel 625 | 10% | 0.60–0.63 | 0.0152–0.160 |
Corrosion-Resistance in 24-hour Tests in Boiling 40% Formic Acid
| Material | Corrosion Rate In mpy | Corrosion Rate In mm/a |
|---|---|---|
| Nickel 625 | 6.8–7.8 | 0.17–0.19 |
Rockwell hardness of Inconel 600 pipe fittings
| Conditions | Rockwell Hardness | Corrosion Rate In mm/a |
|---|---|---|
| Annealed | 65 to 85 |
Maximum operating temperature of Inconel 625 fittings
- 2100°F (1149°C) maximum
Nickel content of Inconel BW fittings
- Alloy 600 = Ni 72%
- Alloy 625 = 61%
Inconel butt welding fittings equivalent
| Standard | Alloy 600 fittings | Alloy 625 fittings |
|---|---|---|
| WERKSTOFF NR. | 2.4816 | 2.4856 |
| UNS | N06600 | N06625 |
| AFNOR | NC15FE11M | NC22DNB4M |
| EN | NiCr15Fe | NiCr22Mo9Nb |
| JIS | NCF 600 | NCF 625 |
| BS | NA 13 | NA 21 |
| GOST | МНЖМц 28-2,5-1,5 | ХН75МБТЮ |
Mechanical properties of Inconel weldable pipe fittings
| Element | Inconel 600 Pipe Fittings | Inconel 625 Pipe Fittings |
|---|---|---|
| Tensile Strength | MPa – 655, PSI – 95,000 | MPa – 930, PSI – 1,35,000 |
| Elongation | 40 % | 42.5 % |
| Yield Strength (0.2%Offset) | MPa – 310, PSI – 45,000 | MPa – 517, PSI – 75,000 |
| Density | 8.47 g/cm3 | 8.4 g/cm3 |
| Melting Point | 2580 °F (1413 °C) | 2460 °F (1350 °C) |
Top 8 Reasons to Choose Ramesh Group for High Pressure Applications
- ADNOC approved manufacturer and supplier of seamless fittings and forged steel flanges
- Supply industrial steel piping products in Europe as per CBAM requirements
- Exporter of high performance weld fittings suitable for corrosion resistant environment
- Distributor of butt welding fittings for Marine application as per MTC EN 10204 3.1/ 3.2
- All pipe flange comes with NACE MR0175 and pressure class 150 to 2500 as per ASME B16.5.
- Over 250 Fabricators and traders in Middle East and European countries import prime quality BLRF, SORF and WNRF flanges because our material is accepted in Abu Dhabi National Oil Company
- Supplying SMLS elbow, tee, reducer and end cap to Stockist and wholesaler of piping materials in Saudi Arabia at Resale price as per ASME B16.9.
- Keep custom sizes Ex stock of standard sizes with stockholders in USA and Mexico for urgent requirements in replacement situations