Monel Suppliers In India & Monel Price Per Kg & Monel Price Chart

Monel Fasteners, Monel Flanges, Round Bar, Hex Bar, Monel Sheet Coil, Monel Plate, Monel Rod, Monel Pipe Tube & Fittings Suppliers India.

Monel Uns N04400 Fasteners Chemical Composition - Nut Bolts Specifications, Pipe Tubing Heat Treatment, Sheet Plate Material Properties, Tube Price, Filler Wire Fittings Hex Bar, Round Bar/ Rod & Fittings, Pipe Weight, Price Per Kg & Price Chart

Looking For a Trusted Provider of Monel Alloy Fasteners, Monel Flanges, Round Bar, Hex Bar, Monel Sheet Coil, Monel Plate, Monel Rod, Monel Pipe Tube & Fittings Suppliers? Ramesh Steel Corporation Suppliers of Monel Products Since 1982 In India, We Are Suppliying Pipe, Forged Fittings, Tube, Sheet, Strip, Plate, Round Bar, Flat Bar In Monel To More Than 120 Companies in UK (United Kingdom), Australia & USA.

Table of Contant

Monel® Alloy 400

Common Trade Names: (Equivalent) Monel 400, Alloy 400; Nickel 400; Nickelvac 400; Nicorros 400.

Monel® Alloy nickel-copper alloy 400 (UNS N04400; W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range  and excellent resistance to many corrosive environments.

Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels and piping; boiler feed water heaters and other heat exchangers; and deaerating heaters.

Available Product Forms:

Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire

Specifications

MONEL® alloy 400 is designated as UNS N04400 and Werkstoff Nr. 2.4360 and 2.4361. It is listed in NACE MR-01-75 for oil and gas service.

Plate, Sheet, and Strip: - BS3072NA13 (Sheet and Plate), BS3073NA13 (Strip), ASTM B 127, ASME SB 127 (Plate,Sheet, and Strip), SAE AMS 4544 (Sheet, Strip, and Plate),
DIN 17750 (Plate, Strip and Sheet), QQ-N-281 (Plate, Sheet, Strip, Bar, Rod, Wire, and Forgings)

Bar, Rod, Wire, and Forgings - BS3075NA13 (Wire), BS3076NA13 (Bar), ASTM B 164 (Rod, Bar, and Wire), ASTM B 564 (Forgings), ASME SB 164 (Rod, Bar, and Wire), ASME SB 564 (Forgings), AECMA PrEN 2305 (Wire for Rivets), SAE AMS 4675 (Bars and Forgings),SAE AMS 4730 (Wire), SAE AMS 4731 (Wire and Ribbon), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754 (Forgings), VdTÜV 263 (Sheet, Plate, Bar, and Tubing), QQ-N-281 (Plate, Sheet, Strip, Bar, Rod, Wire, and Forgings)

Pipe and Tube - BS3074NA13 (Tube), ASTM B 163 (Condenser and Heat Exchanger Tube), ASTM B 165 (Seamless Pipe and Tube), ASTM B 725 (Welded Pipe), ASTM B 730 (Welded Tube), ASTM B 751 (Welded Tube), ASTM B 775 (Welded Pipe), ASTM B 829 (Seamless Pipe and Tube), ASME SB 163 (Condenser and Heat Exchanger Tubes), ASME SB 165 (Seamless Pipe and Tube), ASME SB 725 (Welded Pipe), ASME SB 730 (Welded Tube), ASME SB 751 (Seamless and Welded Tube), ASME SB 775 (Seamless and Welded Pipe), ASME SB 829 (Seamless Pipe and Tube), SAE AMS 4574 (Seamless Tubing), DIN 17751 (Pipe and Tube), VdTÜV 263 (Sheet, Plate, Bar, and Tubing),

Welding Products - MONEL Filler Metal 60-AWS A5.14/ERNiCu-7; MONEL Welding Electrode 190-AWS A5.11/ENiCu-7.

Other Products - ASTM B 366, ASME SB 366 (Welded Fittings), SAE AMS 7233 (Rivets), DIN 17743 (Chemical Composition)

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. American Special Metals, Corp. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.

Monel® Alloy 400  is a Registered Trademark of Special Metals Corporation and Its subsidiaries.

Fasteners: Do you need custom fasteners created with Monel 400? Since our inception, Ramesh Group has met every challenge of providing quality, timely, cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Monel 400 Bar Stock we have available to meet your needs.

Special Metals MONEL™ Alloy 400

Subcategory: Copper Alloy; Metal; Nickel Alloy; Superalloy Key Words: AFNOR NU30; SAE AMS 4544, 4574, 4575, 4675, 4730, 4731, 7233; DIN 17743, 17750 – 17754, ASME SB-127, SB-163 – SB-165, SB-564, Boiler Code Sections III, IV, VIII, IX; AECMA Pr EN 2305, Monel Nickel-Copper Alloy, UNS N04400; BS 3072-3076 (NA 13); ASTM B 127, B 163 – B 165, B 564, Werkstoff Nr. 2.4360, 2.4361; VdTUV 263; MIL-T-1368, MIL-T-23520, MIL-N-24106; QQ-N-281; NACE MR-01-75

ComponentWt. %
CMax 0.3
Cu28 – 34
FeMax 2.5
MnMax 2
NiMin 63
SMax 0.024
SiMax 0.5

Material Notes: Nickel content above includes cobalt. A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalis. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Ramesh Steel’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit https://www.rameshgroup.com/ or Phone +91-22-6636 3233.

Physical PropertiesMetricEnglishComments
Density8.8 g/cc0.318 lb/in³
Mechanical Properties
Tensile Strength, Ultimate550 MPa79800 psiAnnealed. Value at room temperature. Value at 425°C is 450 MPa.
Tensile Strength, Yield240 MPa34800 psiAnnealed. Value at room temperature; 0.2% offset. Value at 425°C is 170 MPa.
Elongation at Break48 %48 %Annealed. Value at room temperature. Value at 425°C is 50%.
Electrical Properties
Electrical Resistivity5.47e-005 ohm-cm5.47e-005 ohm-cm
Curie Temperature35 °C95 °FRange is 20-50°C
Thermal Properties
CTE, linear 20°C13.9 µm/m-°C7.72 µin/in-°F20-100°C
Heat Capacity0.427 J/g-°C0.102 BTU/lb-°F
Thermal Conductivity21.8 W/m-K151 BTU-in/hr-ft²-°F
Melting Point1300 – 1350 °C2370 – 2460 °F
Solidus1300 °C2370 °F
Liquidus1350 °C2460 °F

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. American Special Metals, Corp. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.

Monel® Alloy K-500

Common Trade Names: (Equivalent) Monel K-500; Alloy K-500; Nickel K-500;

Monel® Alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL® alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging. 

Typical applications for Monel® Alloy K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electronic components.

Specifications

Available Product Forms: 
Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire.MONEL® alloy K-500 is designated as UNS N05500 and Werkstoff Nr. 2.4375. It is listed in NACE MR-01-75 for oil and gas service.

Plate, Sheet, and Strip: BS3072NA18 (Sheet and Plate), BS3073NA18 (Strip), QQ-N-286 (Plate, Sheet and Strip), DIN 17750 (Plate, Sheet and Strip), ISO 6208 (Plate, Sheet and Strip).

Bar, Rod, Wire, and Forgings: BS3075NA18 (Wire), BS3076NA18 (Rod and Bar), ASTM B 865 (Rod and Bar), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754
(Forgings), QQ-N-286 (Rod, Bar, Wire, and Forgings), SAE AMS 4676 (Rod and Bar), ASME Code Case 1192 (Rod and Bar), ISO 9723 (Bar), ISO 9724 (Wire), ISO
9725 (Forgings

Pipe and Tube: BS3074NA18 (Seamless Pipe and Tube), DIN 17751 (Pipe and Tube)
Other Products - DIN 17743 (Chemical Composition), SAE AMS 4676 (Chemical Composition), QQ-N-286 (Chemical Composition)

Monel® Alloy K-500 is a Registered Trademark of Special Metals Corporation and Its subsidiaries.

Do you need custom fasteners created with Monel™ K-500? Since our inception, Ramesh Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Monel™ K-500 Bar Stock we have available to meet your needs.

Special Metals MONEL™ Alloy K-500

Subcategory: Copper Alloy; Metal; Nickel Alloy; Superalloy Key Words: DIN 17743, 17752, 17754; Werkstoff Nr. 2.4375; QQ-N-286; NACE MR -01-75, Monel Nickel-Copper Alloy, UNS N05500; BS 3072 – 3076 (NA18); ASME Boiler Code Section VIII; SAE AMS 4676; MIL-N-24549

ComponentWt. %
Al2.3 – 3.15
CMax 0.25
Cu27 – 33
FeMax 2
MnMax 1.5
NiMin 63
SMax 0.01
SiMax 0.5
Ti0.35 – 0.85

Material Notes: A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to under -150°F (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Physical PropertiesMetricEnglishComments
Density8.44 g/cc0.305 lb/in³
Mechanical Properties
Tensile Strength, Ultimate1100 MPa160000 psiPrecipitation Hardened. Value at room temperature. Value at 425°C is 860 MPa.
Tensile Strength, Yield790 MPa115000 psiPrecipitation Hardened. Value at room temperature; 0.2% offset. Value at 425°C is 630 MPa.
Elongation at Break25 %25 %Precipitation Hardened. Value at room temperature. Value at 425°C is 12%.
Electrical Properties
Electrical Resistivity6.15e-005 ohm-cm6.15e-005 ohm-cm
Magnetic Permeability1.0021.002at 200 oersted (15.9 kA/m)
Curie Temperature-65 °C-85 °F
Thermal Properties
CTE, linear 20°C13.7 µm/m-°C7.61 µin/in-°F20-100°C
Heat Capacity0.419 J/g-°C0.1 BTU/lb-°F
Thermal Conductivity17.5 W/m-K121 BTU-in/hr-ft²-°F
Melting Point1315 – 1350 °C2400 – 2460 °F
Solidus1315 °C2400 °F
Liquidus1350 °C2460 °F

Monel 400 price per kg, Monel k500 price, Monel price in India

Monel 400 price per kg, Monel 400 Cost , Monel 400 prices, Monel 400 price per pound, Monel 400 price chart, Monel K500 Rate, Monel price in india, Monel 400 price in india per kg

Monel 400 Price per kg in India
Monel 400 Price per kgOriginPrice in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Monel 400 Price in IndiaIndianRs 2000/-$30€24
Monel 400 Price in JapanJapaneseRs 2800/-$40€35
Monel 400 Price in UK / EuropeEuropeanRs 3100/-$45€39
Monel 400 Price in USAUSARs 3400/-$50€43
Monel K500 Price per kg in India
Monel K500 Price per kgOriginPrice in INR
(per kg)
Price in USD
(per kg)
Price in Euro
(per kg)
Monel K500 Price in IndiaIndianRs 1600/-$24€20
Monel K500 Price in JapanJapaneseRs 1790/-$27€23
Monel K500 Price in UK / EuropeEuropeanRs 1900/-$28€24
Monel K500 Price in USAUSARs 2000/-$30€25
Quick Enquiry