Stainless Steel Lap Joint Flanges

Stainless Steel Lap Joint Flanges

Manufacturer Carbon Steel Loose Flanges and ASME B16.5 Lap Joint Weld Flange in India

The stainless steel ANSI specified Class 150 Lap Joint Flange is a 2 piece device. This device i.e. the ASME B16.5 Lap Joint Flange is similar not only to a weld-neck flange but also to a loose slip-on flange. One part or piece of these ansi b16.5 class 150 lap joint flanges is generally referred to as a sleeve, which in turn is known as a Stub-end. The stub end of these Carbon Steel Lap Joint Flanges has been manufactured in such a manner that it is shaped like a short piece of pipe, which has a weld bevel on one end. Whereas the other end of the Stainless Steel Lap Joint Flange has a narrow shoulder, which is referred to as the hub.

Check Alloy Steel Type A Lap Joint Flange dimensions and pressure rating chart, Stockist of ANSI 150# LJ Flange

The hub of these SS Lap Joint Flanges generally has the same outside diameter, like the raised face or the gasket contact surface of a weld neck flange, with the thickness of the hub being usually about ¼ inch to about ⅜ inch. The back face of the hub on this flange will have a rounded transition or inside fillet which is what joins the hub to the sleeve.

The other piece of the stainless steel Class 600 Lap Joint Flange is a backing flange. While this part of the specified a105 lap joint flange has all the same common dimensions i.e the O.D. or outer diameter, bolt circle, bolt hole size, etc. as any conventional flange, however, the lap joint flange does not have a raised face.

Exporter of Lap Joint Backing Flange in Class 150# to 2500# accordance to ASME B16.5, Are you looking for Copper Nickel Lap Joint Flange Distributor

Stainless Steel Lap Joint Flanges

Stainless Steel Lap Joint Flanges


Carbon Steel Loose Flanges

Carbon Steel Loose Flanges


ASME B16.5 Lap Joint Weld Flange

ASME B16.5 Lap Joint Weld Flange



Stainless Steel Lap Joint Flanges Specifications

Manufacturer of Stainless Steel Lap Joint Flanges
ANSI Pressure Class 150LBS, 300LBS, 1500LBS, 600LBS, 900LBS, 2500LBS, Stainless Steel Lap Joint Flanges
Meets Standards SABS 1123, GOST 12821-80, BS, EN, JIS, MSS, UNI, ASTM, API, ISO, GOST 33259, API, ANSI, ASME, DIN, SP, Ss Lap Joint Flanges
EN 1092-1/ EN 1092-2 Lap Joint Flanges standard
10Bar, 40Bar, 16Bar, 6Bar, 25Bar, ASME B16.5 Loose Flange
BS Standards BS4504, BS10, BS4504, BS1560, Pn16 Lapped Joint Flange
Japanese Industrial Standards - JIS B2220 40K, 10K, 5K, 16K, 20K, 30K, 63K, SS Vanstone Flange
DIN Standards DIN 2632, DIN 2635, DIN 2637, DIN 2502, DIN 2636, DIN 2656, DIN 2566, DIN 2576, 2631, DIN 2566, DIN 2576, DIN 2629, DIN 2638, DIN 2655, DIN 2642, DIN 2627, DIN 2635, DIN 2638, DIN 2527, DIN 2503, DIN 2573, DIN 2633, DIN 2633, DIN 2628, DIN 2641, DIN 2636, DIN 2573, DIN 2637, DIN 2628, DIN 2630, DIN 2634, DIN 2673, DIN 2527, DIN 2631, DIN 2565, DIN 2634, Raised Face Lap Joint Flange
Wall Thickness Sch10, Sch30, STD, Sch40, Sch60, Sch20, EXT-Hvy, Sch80, Sch120, Sch140, Sch160, XX-Hvy, Sch100, Carbon Steel Lj Flange
Types Welded, Threaded, Plate, Forged, Screwed, A105 Lap Joint Flange
Most common Large Diameter Lap Joint Flange processes followed by manufacturers
  • Cutting
  • Casting
  • Open die forging
  • Closed die forging
  • Roll forging
We also supply
  • Sealing Gaskets
  • Ring Joint Gasket
  • Flange Bolts as Required
Flange faces
  • Flat (FF)
  • Ring joint (RTJ)
  • Raised (RF)
  • Lap joint
  • Tongue and groove (T&G)
  • Male and female (M&F)
Stainless Steel Lap Joint Flanges Standard
  • ASME B16.5 (Most popular)
  • ASME B16.47 Series B & A
  • ASME B16.48
  • GOST
  • BS4504
DIN Standards
  • DIN 2501
  • DIN 2633
  • DIN 2627
  • DIN 2642
  • DIN 2635
  • DIN 2543
  • DIN 2527
PN Rating PN10, PN6, PN25, PN16, PN40, PN64, Ansi 150 Rflj Flange
Quality Inspection
  • EN 10204/3.1B MTC
  • 100% Radiography Test Report for any Cracks or any incomplete penetration
  • Raw Materials Certificate
  • Third Party Inspection Report
Value Added Services
  • CNC Machining
  • Large Diameter Carbon Steel Lj Flange
  • Customised Stainless Steel Lap Joint Flanges

Stainless Steel Loose Flange Price in India

Description Price in US $ Price in INR Recent supply location
2 IN Diameter 2X7000 MM SS LAP JOINT flange US $ 8.49 per kg INR 648 per Kg Cambodia
ASA 150 F/F LAP JOINT B16.5 FLANGE US $ 7.70 per kg INR 588 per Kg Indonesia
A182 ASA 150 B16.5 F/F SS LAP JOINT FLANGE US $ 12.98 per kg INR 991 per Kg Malaysia
STAINLESS STEEL FINISHED 1/2 316L A182 ASA 150 F/F LAP JOINT B16.5 FLANGE US $ 4.33 per kg INR 1,094 per Kg Georgia
A105N ASA 150LB 1IN GALV LAP JOINT FLANGE US $ 10.11 per kg INR 772 per Kg Uganda

Different types of Lap Joint Flanges

Ss Lap Joint Flanges

Ss Lap Joint Flanges

Stainless Steel Lap Joint Flanges

Stainless Steel Lap Joint Flanges

ASME B16.5 Loose Flange

ASME B16.5 Loose Flange

SS Vanstone Flange

SS Vanstone Flange

Pn16 Lapped Joint Flange

Pn16 Lapped Joint Flange

Raised Face Lap Joint Flange

Raised Face Lap Joint Flange

A105 Lap Joint Flange

A105 Lap Joint Flange

Carbon Steel Lj Flange

Carbon Steel Lj Flange

Ansi 150 Rflj Flange

Ansi 150 Rflj Flange


Raised Face Lap Joint Flange Pressure Rating

Temperature °F 900 LBS 400 LBS 600 LBS 300 LBS 150 LBS 1500 LBS 2500 LBS
400 1490 660 995 495 190 2485 4140
1000 965 430 640 320 20 1605 2675
600 1310 580 875 435 140 2185 3640
200 1800 800 1200 600 230 3000 5000
500 1395 620 930 465 170 2330 3880
1200 465 205 310 155 20 770 1285
700 1275 565 850 425 110 2125 3540
-20 to 100 2160 960 1440 720 275 3600 6000
1500 80 35 55 25 10 135 230
950 1145 510 765 380 35 1910 3180
650 1290 575 860 430 125 2150 3580
300 1620 720 1080 540 205 2700 4500
1400 145 65 95 50 20 240 400
1100 770 345 515 255 20 1285 2145
900 1165 520 780 390 50 1945 3240
750 1245 555 830 415 95 2075 3460
850 1190 530 790 395 65 1980 3300
1250 340 150 225 115 20 565 945
1350 185 80 125 60 20 310 515
800 1210 540 805 405 80 2015 3360
1050 925 410 615 310 20 1545 2570
1150 595 265 400 200 20 995 1655
1300 255 115 170 85 20 430 715
1450 105 45 70 35 15 170 285

Stockholder of Ductile Iron Lap Joint Flange in India, buy Titanium Pn16 Lap Joint Flange at lowest price in Mumbai

Ansi 150 Lap Joint Flange Dimensions

Outer Diameter Size in Inch Size in mm Lapped ID Flange Thickness Lapped Thickness RF Stud Length PCD Lapped Thickness Lapped Radius No of Bolts Bolt Size UNC Machine Bolt Length Hole Size ISO Stud Size Weight in kg
90 1/2 15 22.9 30 16 55 60.3 11.2 3 4 1/2 50 5/8 M14 0.8
100 3/4 20 28.2 38 16 65 69.9 12.7 3 4 1/2 50 5/8 M14 0.9
110 1 25 34.9 49 17 65 79.4 14.3 3 4 1/2 55 5/8 M14 0.9
115 1 1/4 32 43.7 59 21 70 88.9 15.9 5 4 1/2 55 5/8 M14 1.4
125 1 1/2 40 50 65 22 70 98.4 17.5 6 4 1/2 65 5/8 M14 1.4
150 2 50 62.5 78 25 85 120.7 19.1 8 4 5/8 70 3/4 M16 2.3
180 2 1/2 65 75.4 90 29 90 139.7 22.3 8 4 5/8 75 3/4 M16 3.2
190 3 80 91.4 108 30 90 152.4 23.9 10 4 5/8 75 3/4 M16 3.7
215 3 1/2 90 104.1 122 32 90 177.8 23.9 11 8 5/8 75 3/4 M16 5
230 4 100 116.8 135 33 90 190.5 23.9 11 8 5/8 75 3/4 M16 5.9
255 5 125 144.4 164 36 95 215.9 23.9 11 8 3/4 85 7/8 M20 6.8
280 6 150 171.4 192 40 100 241.3 25.4 13 8 3/4 85 7/8 M20 8.6
345 8 200 222.2 246 44 110 298.5 28.6 13 8 3/4 90 7/8 M20 13.7
405 10 250 277.4 305 49 115 362 30.2 13 12 7/8 100 1 M24 19.5
485 12 300 328.2 365 56 120 431.8 31.8 13 12 7/8 100 1 M24 29
535 14 350 360.2 400 79 135 476.3 35 13 12 1 115 1 1/8 M27 41
595 16 400 411.2 457 87 135 539.8 36.6 13 16 1 115 1 1/8 M27 54
635 18 450 462.3 505 97 145 577.9 39.7 13 16 1 1/8 125 1 1/4 M30 59
700 20 500 514.4 559 103 160 635 42.9 13 20 1 1/8 140 1 1/4 M30 75
815 24 600 616 663 111 170 749.3 47.9 13 20 1 1/4 150 1 3/8 M33 100

Class 300 Flat Face Lap Joint Flange Dimension Chart

Outer Diameter Size in Inch Size in mm PCD Flange Thickness Lapped Thickness Lapped ID Lapped Radius No of Bolts Lapped Thickness Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size Weight in kg
95 1/2 15 66.7 38 22 22.9 3 4 14.3 1/2 55 65 5/8 M14 1.2
115 3/4 20 82.6 48 25 28.2 3 4 15.9 5/8 65 75 3/4 M16 1.4
125 1 25 88.9 54 27 34.9 3 4 17.5 5/8 65 75 3/4 M16 1.4
135 1 1/4 32 98.4 64 27 43.7 5 4 19.1 5/8 70 85 3/4 M16 1.8
155 1 1/2 40 114.3 70 30 50 6 4 20.7 3/4 75 90 7/8 M20 2.7
165 2 50 127 84 33 62.5 8 8 22.3 5/8 75 90 3/4 M16 3.2
190 2 1/2 65 149.2 100 38 75.4 8 8 25.4 3/4 85 100 7/8 M20 4.6
210 3 80 168.3 117 43 91.4 10 8 28.6 3/4 90 110 7/8 M20 5.9
230 3 1/2 90 184.2 133 44 104.1 11 8 30.2 3/4 95 110 7/8 M20 7.7
255 4 100 200 146 48 116.8 11 8 31.8 3/4 95 115 7/8 M20 10
280 5 125 235 178 51 144.4 11 8 35 3/4 110 120 7/8 M20 12.7
320 6 150 269.9 206 52 171.4 13 12 36.6 3/4 110 120 7/8 M20 17.7
380 8 200 330.2 260 62 222.2 13 12 41.3 7/8 120 140 1 M24 26
445 10 250 387.4 321 95 277.4 13 16 47.7 1 140 160 1 1/8 M27 36
520 12 300 450.8 375 102 328.2 13 16 50.8 1 1/8 145 170 1 1/4 M30 52
585 14 350 514.4 425 111 360.2 13 20 54 1 1/8 160 180 1 1/4 M30 75
650 16 400 571.5 483 121 411.2 13 20 57.2 1 1/4 165 190 1 3/8 M33 86
710 18 450 628.6 533 130 462.3 13 24 60.4 1 1/4 170 195 1 3/8 M33 113
775 20 500 685.8 587 140 514.4 13 24 63.5 1 1/4 185 205 1 3/8 M33 143
915 24 600 812.8 702 153 616 13 24 69.9 1 1/2 205 230 1 5/8 M39 216

400 LBS Vanstone Flange Dimensions

Outer Diameter Size in Inch Size in mm Flange Thickness Bolt Size UNC Lapped ID PCD Lapped Radius No of Bolts Lapped Thickness Lapped Thickness RF Stud Length Hole Size ISO Stud Size Weight in kg
95 1/2 15 38 1/2 22.9 66.7 3 4 14.3 22 75 5/8 M14 1.3
115 3/4 20 48 5/8 28.2 82.6 3 4 15.9 25 90 3/4 M16 1.5
125 1 25 54 5/8 34.9 88.9 3 4 17.5 27 90 3/4 M16 1.8
135 1 1/4 32 64 5/8 43.7 98.4 5 4 20.7 29 95 3/4 M16 2.3
155 1 1/2 40 70 3/4 50 114.3 6 4 22.3 32 110 7/8 M20 3.2
165 2 50 84 5/8 62.5 127 8 8 25.4 37 110 3/4 M16 4.1
190 2 1/2 65 100 3/4 75.4 149.2 8 8 28.6 41 120 7/8 M20 5.9
210 3 80 117 3/4 91.4 168.3 10 8 31.8 46 125 7/8 M20 7.3
230 3 1/2 90 133 7/8 104.1 184.2 10 8 35 49 140 1 M24 9.6
255 4 100 146 7/8 116.8 200 11 8 35 51 140 1 M24 11.8
280 5 125 178 7/8 144.5 235 11 8 38.1 54 145 1 M24 14.1
320 6 150 206 7/8 171.4 269.9 13 12 41.3 57 150 1 M24 20
380 8 200 260 1 222.2 330 13 12 47.7 68 170 1 1/8 M27 31
445 10 250 321 1 1/8 277.4 387.4 13 16 54 102 190 1 1/4 M30 42
520 12 300 375 1 1/4 328.2 450.8 13 16 57.2 108 205 1 3/8 M33 59
585 14 350 425 1 1/4 360.2 514.4 13 20 60.4 117 210 1 3/8 M33 82
650 16 400 483 1 3/8 411.2 571.5 13 20 63.5 127 220 1 1/2 M36 107
710 18 450 533 1 3/8 462.3 628.6 13 24 66.7 137 230 1 1/2 M36 130
775 20 500 587 1 1/2 514.4 685.8 13 24 69.9 146 240 1 3/4 M39 157
915 24 600 702 1 3/4 616 812.8 13 24 76.2 159 265 1 7/8 M45 232

Class 600 Carbon Steel Lap Joint Flange Dimensions

Size in mm Size in Inch Flange Thick. Lapped Thick. Bolt Size UNC Lapped ID PCD Lapped Thick. Lapped Radius No of Bolts Outer Diameter RF Stud Length Hole Size ISO Stud Size Weight in kg
15 1/2 38 22 1/2 22.9 66.7 14.3 3 4 95 75 5/8 M14 1.3
20 3/4 48 25 5/8 28.2 82.6 15.9 3 4 115 90 3/4 M16 1.4
25 1 54 27 5/8 34.9 88.9 17.5 3 4 125 90 3/4 M16 1.8
32 1 1/4 64 29 5/8 43.7 98.4 20.7 5 4 135 95 3/4 M16 2.3
40 1 1/2 70 32 3/4 50 114.3 22.3 6 4 155 110 7/8 M20 3.2
50 2 84 37 5/8 62.5 127 25.4 8 8 165 110 3/4 M16 4.1
65 2 1/2 100 41 3/4 75.4 149.2 28.6 8 8 190 120 7/8 M20 5.9
80 3 117 46 3/4 91.4 168.3 31.8 10 8 210 125 7/8 M20 7.3
90 3 1/2 133 49 7/8 104.1 184.2 35 11 8 230 140 1 M24 9.6
100 4 152 54 7/8 116.8 215.9 38.1 11 8 275 145 1 M24 16.8
125 5 189 60 1 144.4 266.7 44.5 11 8 330 165 1 1/8 M27 29
150 6 222 67 1 171.4 292.1 47.7 13 12 355 170 1 1/8 M27 36
200 8 273 76 1 1/8 222.2 349.2 55.6 13 12 420 190 1 1/4 M30 52
250 10 343 111 1 1/4 277.4 431.8 63.5 13 16 510 215 1 3/8 M33 77
300 12 400 117 1 1/4 328.2 489 66.7 13 20 560 220 1 3/8 M33 91
350 14 432 127 1 3/8 360.2 527 69.9 13 20 605 235 1 1/2 M36 105
400 16 495 140 1 1/2 411.2 603.2 76.2 13 20 685 255 1 5/8 M39 150
450 18 546 152 1 5/8 462.3 654 82.6 13 20 745 275 1 3/4 M42 182
500 20 610 165 1 5/8 514.4 723.9 88.9 13 24 815 285 1 3/4 M42 232
600 24 718 184 1 7/8 616 838.2 101.6 13 24 940 330 2 M48 332

Manufacturer of ASTM A182 Gr F321 Lap Joint Flange in wide range of sizes and pressure rating. Leading Supplier of Galvanized Lap Joint Flange

#900 Stainless Lap Joint Flange Dimensions

Size in mm Size in Inch Lapped Thick. RF Stud Length Lapped ID PCD Flange Thick. Lapped Thick. Outer Diameter Lapped Radius No of Bolts Bolt Size UNC Hole Size ISO Stud Size Weight in kg
C D E B G A
15 1/2 32 110 22.9 82.6 38 22.3 120 3 4 3/4 7/8 M20 1.8
20 3/4 35 115 28.2 88.9 44 25.4 130 3 4 3/4 7/8 M20 2.3
25 1 41 125 34.9 101.6 52 28.6 150 3 4 7/8 1 M24 3.6
32 1 1/4 41 125 43.7 111.1 64 28.6 160 5 4 7/8 1 M24 4.1
40 1 1/2 44 140 50 123.8 70 31.8 180 6 4 1 1 1/8 M27 5.5
50 2 57 145 62.5 165.1 105 38.1 215 8 8 7/8 1 M24 11.5
65 2 1/2 64 160 75.4 190.5 124 41.3 245 8 8 1 1 1/8 M27 16.5
80 3 54 145 91.4 190.5 127 38.1 240 10 8 7/8 1 M24 12
100 4 70 170 116.8 235 159 44.5 290 11 8 1 1/8 1 1/4 M30 24
125 5 79 190 144.4 279.4 190 50.8 350 11 8 1 1/4 1 3/8 M33 38
150 6 86 190 171.4 317.5 235 55.6 380 13 12 1 1/8 1 1/4 M30 50
200 8 114 220 222.2 393.7 298 63.5 470 13 12 1 3/8 1 1/2 M36 78
250 10 127 235 277.4 469.9 368 69.9 545 13 16 1 3/8 1 1/2 M36 112
300 12 143 255 328.2 533.4 419 79.4 610 13 20 1 3/8 1 1/2 M36 148
350 14 156 275 360.2 558.8 451 85.8 640 13 20 1 1/2 1 5/8 M39 182
400 16 165 285 411.2 616 508 88.9 705 13 20 1 5/8 1 3/4 M42 193
450 18 190 325 462.3 685.8 565 101.6 785 13 20 1 7/8 2 M48 258
500 20 210 350 514.4 749.3 622 108 855 13 20 2 2 1/8 M52 317
600 24 267 440 616 901.7 749 139.7 1040 13 20 2 1/2 2 5/8 M64 608

Class 1500 SS Lj Flange Dimension Table

Size in mm Size in Inch Lapped Thick. Flange Thick. RF Stud Length Lapped ID PCD Lapped Thick. Lapped Radius Outer Diameter No of Bolts Bolt Size UNC Hole Size ISO Stud Size Weight in kg
C B D E G A
15 1/2 32 38 110 22.9 82.6 22.3 3 120 4 3/4 7/8 M20 1.8
20 3/4 35 44 115 28.2 88.9 25.4 3 130 4 3/4 7/8 M20 2.3
25 1 41 52 125 34.9 101.6 28.6 3 150 4 7/8 1 M24 3.7
32 1 1/4 41 64 125 43.7 111.1 28.6 5 160 4 7/8 1 M24 4.1
40 1 1/2 44 70 140 50 123.8 31.8 6 180 4 1 1 1/8 M27 5.5
50 2 57 105 145 62.5 165.1 38.1 8 215 8 7/8 1 M24 9.8
65 2 1/2 64 124 160 75.4 190.5 41.3 8 245 8 1 1 1/8 M27 16.4
80 3 73 133 180 91.4 203.2 47.7 10 265 8 1 1/8 1 1/4 M30 21.8
100 4 90 162 195 116.8 241.3 54 11 310 8 1 1/4 1 3/8 M33 33
125 5 105 197 250 144.4 292.1 73.1 11 375 8 1 1/2 1 5/8 M39 59
150 6 119 229 260 171.4 317.5 82.6 13 395 12 1 3/8 1 1/2 M36 75
200 8 143 292 290 222.2 393.7 92.1 13 485 12 1 5/8 1 3/4 M42 118
250 10 178 368 335 277.4 482.6 108 13 585 12 1 7/8 2 M48 198
300 12 219 451 375 328.2 571.5 123.9 13 675 16 2 2 1/8 M52 264
350 14 241 495 405 360.2 635 133.4 13 750 16 2 1/4 2 3/8 M56 341
400 16 260 552 445 411.2 704.8 146.1 13 825 16 2 1/2 2 5/8 M64 454
450 18 276 597 495 462.3 774.7 162 13 915 16 2 3/4 2 7/8 M72 590
500 20 292 641 540 514.4 831.8 177.8 13 985 16 3 3 1/8 M76 792
600 24 330 762 615 616 990.6 203.2 13 1170 16 3 1/2 3 5/8 M90 1248

2500 LBS Asme B16.5 Lap Joint Flange Dimensions

Size in mm Size in Inch No of Bolts Lapped Thick. Lapped ID PCD RF Stud Length Lapped Thick. Outer Diameter Lapped Radius Flange Thick. Bolt Size UNC Hole Size ISO Stud Size Weight in kg
15 1/2 4 40 22.9 88.9 120 30.2 135 3 43 3/4 7/8 M20 3.2
20 3/4 4 43 28.2 95.2 125 31.8 140 3 51 3/4 7/8 M20 3.7
25 1 4 48 34.9 108 140 35 160 3 57 7/8 1 M24 5
32 1 1/4 4 52 43.7 130.2 150 38.1 185 5 73 1 1 1/8 M27 7.5
40 1 1/2 4 60 50 146 170 44.5 205 6 79 1 1/8 1 1/4 M30 10
50 2 8 70 62.5 171.4 180 50.9 235 8 95 1 1 1/8 M27 17.5
65 2 1/2 8 79 75.4 196.8 195 57.2 265 8 114 1 1/8 1 1/4 M30 23
80 3 8 92 91.4 228.6 220 66.7 305 10 133 1 1/4 1 3/8 M33 37.8
100 4 8 108 116.8 273 255 76.2 355 11 165 1 1/2 1 5/8 M39 57
125 5 8 130 144.4 323.8 300 92.1 420 11 203 1 3/4 1 7/8 M45 95
150 6 8 152 171.4 368.3 345 108 485 13 235 2 2 1/8 M52 148
200 8 12 178 222.2 438.2 380 127 550 13 305 2 2 1/8 M52 221
250 10 12 229 277.4 539.8 490 165.1 675 13 375 2 1/2 2 5/8 M64 425
300 12 12 254 328.2 619.1 540 184.2 760 13 441 2 3/4 2 7/8 M72 500

Raised Face Lap Joint Flange for Sale

class 600 lap joint flange 4 inch lap joint flange
forged b16.5 raised face lap joint flange Titanium Lap Joint Flange
150# 304 Stainless Steel Raised Face Lap Joint Flange composite lap joint flange
cl.150 a105 lap joint flange ansi 16.5 Forged ASME B16.5 Inconel 600 Lap Joint Flange
ASME B16.5 EN 150lb 1/2" – 96"LJF Flange UNS N06600 Nickel Alloy LJ Flanges
galvanized lap joint flange Class 150 ASTM SS304 Forged Lap Joint Flanges

If you searching a supplier from these places check our supplies below

Al Zour Refinery- Kuwait

Al Zour Refinery- Kuwait

Petrogold Heavy Engineering- saudi arabia

Petrogold Heavy Engineering- saudi arabia

Forest Exploration International (Pty) Ltd- South Africa

Forest Exploration International (Pty) Ltd- South Africa


Downeast Lng Project- Uganda

Downeast Lng Project- Uganda

Zenocean Ltd- Scotland

Zenocean Ltd- Scotland

Hormoz New Oil Refinery- Iran

Hormoz New Oil Refinery- Iran