P355N Steel Flange
EN 10216-3 P355N Blind Flanges
P355N TC1 Slip On Flanges
P355N TC2 Weld Neck Flange
Table of Content
- P355N Material Specification
- P355N Chemical Composition
- Standard Of P355N Flange
- Size Chart Of P355n TC2 Steel Flange
- P355N Temperatur
- Yield Strength Of Werkstoff P355n TC1 Flange
- EN 10216-3 P355N Pipe Flange Tensile Requirements
- Equivalent Designation Of P355N Flange
- P355N Pressure Vessel Forging Heat Treatment
- Types Of P355N Steel Flange
- Materials Of P355N Forged Flange
- Surface Of P355N High Temperature Flange
View P355N Pressure Vessel Forging Specification
Buy P355N Carbon Steel Blind and Slip On Flange With Pressure Class 150 To 2500, Check Chemical Composition & Standard
![Manganese [Mn]](https://www.rameshgroup.com/images/manganese.jpg "Manganese [Mn]")
![Silicon [Si]](https://www.rameshgroup.com/images/silicon.jpg "Silicon [Si]")
![Phosphorus [P]](https://www.rameshgroup.com/images/phosphorus.jpg "Phosphorus [P]")
![Sulfur [S]](https://www.rameshgroup.com/images/sulphur.jpg "Sulfur [S]")
![Carbon [C]](https://www.rameshgroup.com/images/carbon.jpg "Carbon [C]")
![Chromium [Cr]](https://www.rameshgroup.com/images/chromium.jpg "Chromium [Cr]")
![Copper [Cu]](https://www.rameshgroup.com/images/copper.jpg "Copper [Cu]")
![Titanium [Ti]](https://www.rameshgroup.com/images/titanium.jpg "Titanium [Ti]")
![Aluminum [Al]](https://www.rameshgroup.com/images/aluminum.jpg "Aluminum [Al]")
| ASME | Class 150 To Class 2500 |
|---|---|
| DIN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| JIS | 5K -20K |
| UNI | 6Bar 10Bar 16Bar 25 Bar 40Bar |
| EN | PN6 To PN400 |
Size Chart Of P355n TC2 Steel Flange
| ANSI B16.5 | 1/2″-24″ |
|---|---|
| AWWA C207 | 4″-120″ |
| ASME B16.36 | 1″-20″ |
| BS4504 | 1/2″-80″ |
| JIS/KS | 1/2″-60″ |
| ASME B16.47 “A”(MSS SP44) | 26″-60″ |
| ASME B16.47 “B”(API 605) | 26″-60″ |
| BS 3293 | 26″-48″ |
| DIN/ EN1092-1 | 1/2″-80″ |
| API 590/B16.48 | 1/2″-24″ |
Temperatur Of Werkstoff P355N Weld Neck and Socket Weld Flange Available High Temperature Carbon/ Alloy Steel Materials
- Melting temperature = 1370 – 1400°C
- Service temperature = 0 – 500°C
Yield Strength Of Werkstoff P355n TC1 Flange
| MPa | 355 (Min) |
|---|---|
| PSI | 51,500 (Min) |
Manufacturer Of High Alloy Steel P355N Threaded Flange With Face Including RF, RTJ, FF., Refer P355N TC1 EN 10216-3 Pipe Flanges Yield Strength
EN 10216-3 P355N Pipe Flange Tensile Requirements
| MPa Min | PSI Max |
|---|---|
| 490 (71 100) | 650 (94 300) |
Equivalent Designation Of P355N Flange
Also Check Tensile Strength Of P355N High Temperature Flange, and Pressure Vessel P355NH Forged Flange Heat Treatment
P355N Pressure Vessel Forging Heat Treatment
- Normalizing
- Annealing
- Quenching+Tempering
P355n+n socket weld flange
P355n Norm lap joint flange
P355n pressure vessel plate flanges
Steel Grade P355N long neck flanges
P355nh alloy steel threaded flange
P355nh carbon steel orifice flange
Materials Of P355N Forged Flange
- Carbon Steel
- Alloy Steel
- Low Temperature Carbon Steel
- High Temperature Carbon Steel
- Low Temperature Alloy Steel
- High Temperature Alloy Steel
Surface Of P355N High Temperature Flange
- Anti-rust oil
- Clear lacquer
- Black lacquer
- Yellow lacquer
- Hot-dipped galvanized
- Electrical galvanized
Top 8 Reasons to Choose Ramesh Group for High Pressure Applications
- ADNOC approved manufacturer and supplier of seamless fittings and forged steel flanges
- Supply industrial steel piping products in Europe as per CBAM requirements
- Exporter of high performance weld fittings suitable for corrosion resistant environment
- Distributor of butt welding fittings for Marine application as per MTC EN 10204 3.1/ 3.2
- All pipe flange comes with NACE MR0175 and pressure class 150 to 2500 as per ASME B16.5.
- Over 250 Fabricators and traders in Middle East and European countries import prime quality BLRF, SORF and WNRF flanges because our material is accepted in Abu Dhabi National Oil Company
- Supplying SMLS elbow, tee, reducer and end cap to Stockist and wholesaler of piping materials in Saudi Arabia at Resale price as per ASME B16.9.
- Keep custom sizes Ex stock of standard sizes with stockholders in USA and Mexico for urgent requirements in replacement situations