P235GH Flange

P235gh Flange

Manufacturer of P305GH Forged Flange in India, We supply Carbon Steel P250GH Blind Flanges with MT, PT and UT Test Certificates

A flange is a device that has a ridge or lip, allowing it to easily connect with pipes, valves, and other piping equipment in the system. The P235gh Flange is European specified steel that is seen in pressure vessels, boilers, and heat exchangers. These flanges have good strength and work well in different conditions. A P235GH Flange is designed with a superior chemical composition consisting of chromium, nickel, and molybdenum with other constituting alloys like niobium, titanium, vanadium, and a few other constituting alloys. The P245GH Flange has enhanced tolerance to different corrosive and toxic affluents. The flange works well across higher pressure and temperature setups. A P250GH Flange is a heat-resistant alloy that is non-alloyed structural equipment. These flanges are designed to work in standard temperatures up to 480 degrees C. They can be easily welded following standard fabrication processes.

Stockist of En1092-1 P280GH Slip On Flange and Carbon Steel P245GH Forged Flanges offers NDT Test, Pneumatic, Hydrotest, to confirm the integrity of weldments

The P280GH Flange is a strong connecting equipment that ensures a tight seal between two or more pieces of equipment across harsh environments. A P305GH Flange has a density of 7.9 g/cm3 and possesses a tensile strength between 490 to 610mpa with a yield strength up to 305mpa. These flanges have a shear modulus of 82GPA with an elastic modulus between 200 to 215GPA. The versatile Ferritic and martensitic steel Flanges are two of the primary grade of flanges in this grade. These flanges have enhanced toughness and are magnetic in different conditions.

Buy online stock of P305GH Steel Blind Flange and P250GH Forging at high quality, get free quote and sample!

P235gh Flange

P235gh Flange


Stal P235gh Blind Flange

Stal P235gh Blind Flange

P235gh Tc1 Threaded Flange

P235gh Tc1 Threaded Flange


P235GH Flange Specification

Specification P235GH Flange
Sizes Normal Pipe Size 1/2 to NPS 24"
Bore Diameter Normal Pipe ≤ 10
Thickness Normal Pipe Size ≤ 18
Pressure Rating Class 150 To Class 2500 LBS
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Low Temperature Above -29 Degree C (−20°F)
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820, GOST 12821-80, UNI, DIN, EN 1092-1
Surface Finish Smooth, Serrated, Concentric, Stock
Gaskets Types Metallic Ring Gakset
Flat Ring Gasket
Full Face Gasket

Types Of P235gh Weld Neck Flange

CS P245GH Flanges

CS P245GH Flanges

En 10216-2 P235gh Tc1 Blind Flanges

En 10216-2 P235gh Tc1 Blind Flanges

P235gh Tc2 Slip-on Flange

P235gh Tc2 Slip-on Flange

Class 150 Stahl P235gh Tc1 Threaded Flange

Class 150 Stahl P235gh Tc1 Threaded Flange

En 10216-2 P235gh Socket Weld Flange

En 10216-2 P235gh Socket Weld Flange

Stal P235gh Weld Neck Flange

Stal P235gh Weld Neck Flange

Stal P235gh Expander Flange

Stal P235gh Expander Flange

Acier P235gh Spectacle Blind

Acier P235gh Spectacle Blind

P235gh Long Weld Neck Flange

P235gh Long Weld Neck Flange

Din P235gh Blanks

Din P235gh Blanks

Carbon Steel P235gh Reducing Flange

Carbon Steel P235gh Reducing Flange

P235gh Material Orifice Flange

P235gh Material Orifice Flange

Steel P235gh Reducing Flange

Steel P235gh Reducing Flange

Carbon Steel P235gh Spacer

Carbon Steel P235gh Spacer

En 10216-2 P235gh Tc1 Lap Joint Flange

En 10216-2 P235gh Tc1 Lap Joint Flange


En 10216-2 P235Gh Blind Flanges Chemical Composition

Grade Carbon Silicon Manganese Nickel Phosphorus Sulfur Chromium Molybdenum Vanadium Nitrogen Niobium Titanium Aluminium Copper
P235GH Flange 0.16 0.35 0.6 – 1.2 0.3 0.025 0.015 0.3 0.08 0.02 0.012 0.02 0.03 0.02 0.3

Carbon Steel P235gh Flange Mechanical Properties

Grade Elongation Yield Thickness Impact Energy minimum Tensilmie
P235GH Minimum Minimum Mpa mm -20° +20° Mpa
24 235 ≤ 16 27 34 40 360-480
24 225 16> to ≤40 27 34 40 360-480
24 215 40> to ≤60 27 34 40 360-480
24 200 60> to ≤100 27 34 40 360-480
24 185 100> to ≤150 27 34 40 350-480
24 170 150> to ≤250 27 34 40 340-480

P235gh Flange Weight

Supplier of P250GH Carbon Steel Socket Weld Flange and Class 600 P245GH Steel Threaded Flange with marking and stamping
Nominal Pipe Sizes Socket Weld Slip On Threaded Lap Joint Weld Neck Blind
¾ 2 2 2 2 2 2
1 2 2 2 2 3 2
22 185 185 185 245 225 355
3 3 3 3 4 4
½ 2 1 1 1 2 2
10 43 43 43 43 54 70
14 90 90 90 105 114 140
20 165 165 165 195 197 285
3 3 3 3 3 3
5 15 15 15 15 21 20
4 13 13 13 13 16.5 17
16 98 106 98 140 140 180
8 30 30 30 30 42 47
12 64 64 64 64 88 123
2 5 5 5 5 6 5
18 130 130 130 160 165 220
8 8 8 8 10 7
3 9 9 9 9 11.5 9
11 11 12 11 12 13
6 19 19 19 19 26 27
24 220 220 220 275 268 430

Carbon Steel P235gh Flange Pressure Rating

Temperature °F 300# 150# 900# 400# 1500# 600# 2500#
200 600 230 1800 800 3000 1200 5000
-20 to 100 720 275 2160 960 3600 1440 6000
400 495 190 1490 660 2485 995 4140
1450 35 15 105 45 170 70 285
600 435 140 1310 580 2185 875 3640
1200 155 20 465 205 770 310 1285
500 465 170 1395 620 2330 930 3880
1300 85 20 255 115 430 170 715
300 540 205 1620 720 2700 1080 4500
1150 200 20 595 265 995 400 1655
650 430 125 1290 575 2150 860 3580
1350 60 20 185 80 310 125 515
1050 310 20 925 410 1545 615 2570
700 425 110 1275 565 2125 850 3540
1000 320 20 965 430 1605 640 2675
1100 255 20 770 345 1285 515 2145
800 405 80 1210 540 2015 805 3360
1500 25 10 80 35 135 55 230
850 395 65 1190 530 1980 790 3300
1400 50 20 145 65 240 95 400
900 390 50 1165 520 1945 780 3240
750 415 95 1245 555 2075 830 3460
950 380 35 1145 510 1910 765 3180
1250 115 20 340 150 565 225 945

Stal P235gh Weld Neck Flange Thickness Chart

PED approved P245GH Steel Orifice Flanges manufacturers in India offers widest selection of EN 1.0460 Lap Joint Flange in Mumbai
Normal Pipe Sizes Outside Daimeter Schedule 60 Schedule 10 STD Wall Schedule 20 Schedule 120 Schedule 40 EXT Hvy Schedule 30 Schedule 80 Schedule 100 Schedule 160 Schedule 140 XX Hvy
½ 0.84 0.083 0.109 0.109 0.147 0.147 0.188 0.294
26 26 0.375 0.5
¾ 1.05 0.083 0.113 0.113 0.154 0.154 0.219 0.308
1 1.315 0.109 0.133 0.133 0.179 0.179 0.25 0.358
14 14 0.594 0.25 0.375 0.312 1.094 0.438 0.5 0.375 0.75 0.938 1.406 1.25
1 ¼ 1.66 0.109 0.14 0.14 0.191 0.191 0.25 0.382
1 ½ 1.9 0.109 0.145 0.145 0.2 0.2 0.281 0.4
18 18 0.75 0.25 0.375 0.312 1.375 0.562 0.5 0.438 0.938 1.156 1.781 1.562
2 2.375 0.109 0.154 0.154 0.218 0.218 0.344 0.436
48 48 0.375 0.5
12 12.75 0.562 0.18 0.375 0.25 1 0.406 0.5 0.33 0.688 0.844 1.312 1.125 1
2 ½ 2.875 0.12 0.203 0.203 0.276 0.276 0.375 0.552
42 42 0.375 0.5
10 10.75 0.5 0.165 0.365 0.25 0.844 0.365 0.5 0.307 0.594 0.719 1.125 1 1
16 16 0.656 0.25 0.375 0.312 1.219 0.5 0.5 0.375 0.844 1.031 1.594 1.438
3 3.5 0.12 0.216 0.216 0.3 0.3 0.438 0.6
3 ½ 4 0.12 0.226 0.226 0.318 0.318 0.636
40 40 0.375 0.5
22 22 0.25 0.375 0.5
4 4.5 0.12 0.237 0.438 0.237 0.337 0.337 0.531 0.674
20 20 0.812 0.25 0.375 0.375 1.5 0.594 0.5 0.5 1.031 1.281 1.969 1.75
5 5.563 0.134 0.258 0.5 0.258 0.375 0.375 0.625 0.75
30 30 0.312 0.375 0.5 0.5 0.625
6 6.625 0.134 0.28 0.562 0.28 0.432 0.432 0.719 0.864
24 24 0.969 0.25 0.375 0.375 1.812 0.688 0.5 0.562 1.219 1.531 2.344 2.062
8 8.625 0.406 0.148 0.322 0.25 0.719 0.322 0.5 0.277 0.5 0.594 0.906 0.812 0.875
36 36 0.312 0.375 0.5 0.75 0.5 0.625

P235gh Tc2 Slip-on Flange Application

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Chemical Equipment
  • Gas Processing
  • Petrochemicals
  • Pharmaceutical Equipment
  • Pharmaceuticals
  • Heat Exchangers
  • Condensers
  • Specialty Chemicals
  • Pulp and Paper Industry
  • Sea Water Equipment

P235gh Weld Neck Flange Size Chart

Nominal Size Of Pipe Liner
Wall Thickness
(Ø A) Type Of Flanges (D)
(DN1) (DN2)
Inche Inche mm mm mm
1 1/2 5.0 108 1 30
3/4 1/2 5.0 98.5 1 30
1 3/4 5.0 108 1 30
1.1/2 3/4 5.0 127 1 30
2 3/4 5.0 152 2 30
1.1/2 1 5.0 127 1 30
2 1/2 5.0 152 3 30
3 3/4 5.0 190.5 3 35
12 6 3.5 483 3 35
2 1 5.0 152 2 30
4 1 5.0 228.6 3 35
3 1.1/2 5.0 190.5 2 35
16 12 3.5 597 3 40
6 1.1/2 5.0 280 3 40
3 2 5.0 190.5 1 35
4 3/4 5.0 228.6 3 35
3 1 5.0 190.5 3 35
4 1.1/2 5.0 228.6 3 35
2 1.1/2 5.0 152 1 30
6 3/4 5.0 280 3 40
4 2 5.0 228.6 3 35
6 2 5.0 280 3 40
4 3 5.0 228.6 2 35
6 1 5.0 280 3 40
8 1 5.0 343 3 35
6 3 5.0 280 3 40
12 10 3.5 483 2 35
8 1.1/2 5.0 343 3 35
6 4 5.0 280 2 40
8 4 5.0 343 3 40
8 2 5.0 343 3 40
8 3 5.0 343 3 40
10 1.1/2 2.5 406 3 35
14 12 3.5 533 1 40
10 6 2.5 406 3 35
8 6 5.0 343 2 40
10 1 2.5 406 3 35
10 3 2.5 406 3 35
12 1.1/2 3.5 483 3 35
10 4 2.5 406 3 35
10 8 3.5 406 2 35
12 1 3.5 483 3 35
12 4 3.5 483 3 35
12 2 3.5 483 3 35
12 3 3.5 483 3 35
10 2 2.5 406 3 35
12 8 3.5 483 3 35
16 14 3.5 597 2 35

P235GH Flange Dimensions

Class 300 LBS 150 LBS 600 LBS 1500 LBS 900 LBS 2500 LBS
Diameter
K
66.7 60.3 66.7 82.6 82.6 88.9
B 12.7 9.6 14.3 22.3 22.3 30.2
14.3 11.2 20.7 28.7 28.7 36.6
Diameter
D
95 90 95 120 120 135
Diameter
L
15.9 15.9 15.9 22.2 22.2 22.2
Diameter
G
35.1 35.1 35.1 35.1 35.1 35.1
Number
L
4 4 4 4 4 4
Diameter
(in)
1/2 1/2 1/2 3/4 3/4 3/4
Length
mm
65 55 75 110 110 120