Nickel 200 Pipe Fittings

Nickel 200 Pipe Fittings

We are leading ASTM B366 UNS N02200 Elbow Manufacturer in India, Refer Dimensions and Price list of Alloy 200 Reducer

Pipe fittings are adapters that connect different piping equipment efficiently to influence the characteristics of the flow in the system. The Nickel 200 Pipe Fittings are solid solution strengthened alloys designed with commercially pure wrought materials. These fittings have nickel as their primary constituent with other constituting alloys. Nickel Alloy Pipe Fittings help in installing, terminating, routing, and reducing the flow of media within different piping equipment. The Nickel Pipe Fittings are connected with different equipment having different ends and fitting types to suit specific requirements. Nickel Alloy Fittings have excellent mechanical properties and are elongated at the break. These fittings can be readily heat treated or fabricated following standard procedures. The Nickel Alloy Forged Fittings are produced at elevated pressures and temperatures, giving them higher strength. These fittings have a finer grain structure and a lower surface porosity. The Nickel Fittings are seen commonly in food processing equipment, rocket motors, aerospace and missile components, synthetic fibers, etc.

Stockist of Nickel Alloy Pipe Fittings in Mumbai, 200 Nickel Equal Tee dispatch with material test reports

The Nickel Elbow is a versatile fitting that helps in changing the direction of the flow of liquids and gases between two pipes. These elbows allow for a smooth flow of media in the system. ASTM B366 WPN elbow is commonly designed in 45, 90, 22.5 and 180 specifications. These elbows are produced in either long or short radius elbows. The Nickel Alloy Tee Fitting is a unique three-sided fitting that allows for flow to take place between 2 channels. In these versatile fittings, it has 2 outlets and 1 inlet connected 90 degrees to the main line. ASTM B366 UNS N02200 Tee can supply media in equal proportions or in unequal directions. These tees are available in different sizes and shapes to suit different applications. The Nickel Reducer is employed to connect dissimilar piping equipment. These reducers are available in concentric and eccentric specifications.

Supplier of ASME SB 366 Alloy 200 Butweld Fittings and Alloy 200 End Cap in accordance to ASME B16.9


Nickel Alloy 201 Buttweld Fittings

Nickel Alloy 201 Buttweld Fittings

ASTM B161 UNS N02200 Fittings

ASTM B161 UNS N02200 Fittings

High Nickel Alloy 200 Elbow

High Nickel Alloy 200 Elbow



Nickel 200 Pipe Fittings Specification

Specifications Nickel 200 Pipe Fittings
Brand Ramesh Steel Corrporation
Supply Ability 600 Ton Per Month
Types Of Nickel 200 Fittings manufacturer in India Pipe Tee ( Reducing, Equal, Unequal, Lateral, Straight, Barred, Split)
Pipe Cap (Square/ Round/ Rectangular/ “U” Shape/ “I” Shape/ Oval End)
Pipe Reducer (Eccentric And Concentric)
Pipe Elbow (45 Deg/ 90 Deg/ 180 Deg/ With Long Radius & Short Radius)
We Have Forging Production Technique Forged/ Heat treated and machined
Available Packing Plywood Box And Plywood Pallet
Types Of Coating Anti-rust Paint
Zinc Plated
Oil Black Paint
Yellow Transparent
Cold and Hot Dip Galvanized
RSC Transportation In Air And Ocean
Manufacturing Productivity 700 ton per month
Schedule SCH 5S/ SCH 10S/ SCH 40S/ SCH 80S/ SCH 160S/ SCH XXS
Size Of Manufacturer Buttweld (BW) ½" NB to 120" NB
Seamless (SMLS) ½” to 26”
Welded (Weld) ½” to 80”
Manufacturer Standard & Dimension ASME B16.28/ ASME B16.9/ ASME B16.11
Use In Oil and Gas
Petrochemical/ Refinery/Chemical
Process Instrumentation
Marine & dredging
Sanitation
Power etc.

Nickel 200 fittings Price

Description Unit Quantity Price In (INR) Price In US ($)
Concentric Reducer, 3/2, Nickel 200/201 B366, Smls, S40 B16.9 KGS 2 30,568 US $390.63
Nickel 200/201, Smls, Concentric Reducer 2/ 1 1/2, Sch 40 KGS 3 29,952 US $382.76
Smls, Nickel Alloy 200/201, 3/2, Sch 40, Concentric Reducer KGS 4 61,136 US $781.27
Nickel 200 Fittings, Tube Fitting , Tee PCS 2 22,022 US $281.42
Nickel 200, Tube Fitting, Union PCS 2 39,905 US $509.95
Nickel Alloy 200/201, Smls, Con Reducer, 3/2, Sch 80 KGS 2 49,426 US $631.62
90 Deg, 2 3/2, Nickel 200/201, B366, Bw, SCH 40, B16.9 KGS 2 22,356 US $285.69
90 Deg, 2 1/2, Nickel 200/201 B366, BW, SCH 80, ASME B16.9 KGS 2 25,468 US $325.46

Types Of ASME B366 Nickel Alloy 200 Fittings

Nickel 200 90° Long Radius Elbow

Nickel 200 90° Long Radius Elbow

Alloy 200 45° Short Radius Elbow

Alloy 200 45° Short Radius Elbow

200 Nickel Elbow

200 Nickel Elbow

Nickel UNS N02200 Equal Tee

Nickel UNS N02200 Equal Tee

WERKSTOFF NR. 2.4066 Reducing Tee

WERKSTOFF NR. 2.4066 Reducing Tee

ASTM B366 Nickel 200 Concentric Reducer

ASTM B366 Nickel 200 Concentric Reducer

Ni 200 Eccentric Reducer

Ni 200 Eccentric Reducer

Alloy 200 End Cap

Alloy 200 End Cap

UNS N02200 Return Bends

UNS N02200 Return Bends

Alloy 200 Elbow

Alloy 200 Elbow

Nickel Alloy 201 Buttweld Fitting

Nickel Alloy 201 Buttweld Fitting

ASTM B161 UNS N02200 Fitting

ASTM B161 UNS N02200 Fitting

Nickel Alloy 200 Seamless Fitting

Nickel Alloy 200 Seamless Fitting

ASME B366 Nickel Alloy 200 Fitting

ASME B366 Nickel Alloy 200 Fitting

High Nickel Alloy 200 Elbow

High Nickel Alloy 200 Elbow


Nickel 200 fittings Chemical Composition

Grade Nickel 200 Pipe Fittings
Mo
Mn 0.35 maximum
Ni 99.0 minimum
Fe 0.4 maximum
P
S 0.01 maximum
Cu 0.25 maximum
Cr
C 0.15 maximum
Si 0.1 maximum

Alloy 200 End Cap Mechanical Properties

Grade Nickel 200 Pipe Fittings
Elongation 45 %
Melting Point 1446 °C (2635 °F)
Density 8.9 g/cm3
Tensile Strength Psi – 67000 , MPa – 462
Yield Strength (0.2%Offset) Psi – 21500 , MPa – 148

High Nickel Alloy 200 Elbow Dimensions

High Nickel Alloy 200 Elbow Dimensions

Normal Pipe Size Outer Diameter Of
(D)
90 Deagree Long Radius
(A)
45 Deagree Long Radius
(B)
90 Deagree 3D
(A)
45 Deagree 3D
(B)
1/2 21.3 38 16    
3/4 26.7 38 19 57 24
1 33.4 38 22 76 31
1.1/4 42.2 48 25 95 39
1.1/2 48.3 57 29 114 47
2 60.3 76 35 152 63
2.1/2 73 95 44 190 79
3 88.9 114 51 229 95
3.1/2 101.6 133 57 267 111
4 114.3 152 64 305 127
5 141.3 190 79 381 157
6 168.3 229 95 457 189
8 219.1 305 127 610 252
10 273 381 159 762 316
12 323.8 457 190 914 378
14 355.6 533 222 1067 441
16 406.4 610 254 1219 505
18 457 686 286 1372 568
20 508 762 318 1524 632
22 559 838 343 1676 694
24 610 914 381 1829 757
26 660 991 406 1981 821
28 711 1067 438 2134 883
30 762 1143 470 2286 946
32 813 1219 502 2438 1010
34 864 1295 533 2591 1073
36 914 1372 565 2743 1135
38 965 1448 600 2896 1200
40 1016 1524 632 3048 1264
42 1067 1600 660 3200 1326
44 1118 1676 695 3353 1389
46 1168 1753 727 3505 1453
48 1219 1829 759 3658 1516


Equivalent Of Nickel 200 Pipe Fittings

STANDARD Nickel 200 Pipe Fittings
BS NA 11
GOST НП-2
JIS NW 2200
EN Ni 99.2
AFNOR N-100M
WERKSTOFF NR. 2.4066
UNS N02200

Properties Of ASME B366 Nickel Alloy 200 Reducer

Characteristic

Value

Curie Temperature

253oC

Sound transmissibility

4,900 m/s @ room temperature

Electrical Resistivity

69.3 nΩ-m @20oC

Young’s Modulus

200 GPa

Atomic number

28

Atomic weight

58.69

Melting point

1453oC

Boiling Point

2730oC

Bulk Modulus

180 GPa

Shear modulus

76 GPa

Poisson’s ratio

0.31

Coefficient of Thermal Expansion

13.4 μm/(m-oK)

Coefficient of Thermal Conductivity

90.9 W/(m-oK)

Recyclable/Recoverable

Yes

Mohs hardness

4.0

Vickers hardness

638 MPa

Density

8.90 g/cm3 @ 25oC


UNS N02200 Fittings Weight

NPS (Normal Pipe Size) Weight As Per (LBS) Weight As Per (Kilogram)
1/2 0.09 0.04
3/4 0.09 0.04
1 0.25 0.11
1.1/4 0.38 0.17
1.1/2 0.4 0.18
2 0.81 0.37
2.1/2 1.75 0.79
3 2.63 1.19
3.1/2 3.5 1.59
4 4.5 2.04
5 7.5 3.4
6 12 5.44
8 23 10.43
10 43 19.5
12 62 28.12
14 80 36.29
16 100 45.36
18 126 57.15
20 160 72.57
22 197 89.36
24 238 107.95
26 275 124.74
30 367 166.47
36 531 240.86

Stockist of WNR 2.4066 Eccentric/ Concentric Reducer for SCH10 to SCH160 Pipes, We Supply Monel ASTM B366 UNS N02200 Stub End With Non Destructive Test and MTC Reports

WNR 2.4066 Tee Dimensions

WNR 2.4066 Tee Dimensions


NPS 1/2
to
2.1/2
3
to
3.1/2
4 5
to
8
10
to
18
20
to
24
26
to
30
32
to
48
O.D.
at Bevel ((D))
+1.6
-0.8
1.6 1.6 +2.4
-1.6
+4
-3.2
+6.4
-4.8
+6.4
-4.8
+6.4
-4.8
I.D. at End 0.8 1.6 1.6 1.6 3.2 4.8 +6.4
-4.8
+6.4
-4.8
Center-End ((C and M)) 2 2 2 2 2 2 3 5
Wall Thickness ((T)) Not less than 87.5% of Wall Thickness

Nickel 201 Forged Fitings Pressure Rating

Class of
Fitting
Type of
Fitting
SCH No. Wall Designation
Class 2000 Threaded SCH 80 XS
Class 3000 Threaded SCH 160 -
Class 6000 Threaded - XXS
Class 3000 Socket Weld 80 XS
Class 6000 Socket Weld SCH 160 -
Class 9000 Socket Weld - XXS

Differences between 3M and 6M Nickel Alloy 201 Buttweld Fittings

Description 3000 PSI (3M) 6000 PSI (6M)
Body Size Smaller Bigger
Thickness Thinner Thicker
Unit Weight Lighter Heavier
Working Pressure Lower Higher

HView ASTM B366 WPN Elbow Dimension, Weight chart and price in India, Ni Alloy 200 Fittings exporter in India

Connection Types Of Nickel 200 Pipe Fittings

Number Type of Pipe Fitting Connection Types
1 Straight Coupling Female x Female
2 90 Deg / 45 Deg Elbow Female x Female
3 3 Way Tee Female x Female x Female
4 3 Piece Union Female x Female
5 End Cap Female
6 90D / 45D Street Elbow Female x Male
7 Hex Plug Male
8 Hex Nipple Male x Male
9 Hex Bush Female x Male
10 Half Coupling Female