ASME/ANSI b16.5 Long Weld Neck Flange Manufacturers Suppliers Distributors in India

Long Weld Neck Flange Material Application & Material Dimensions Metric & Weight Chart - Ansi B16.5 Asme B16.5 Class 150/300/600/900/1500/2500

Material - Carbon Steel, Alloy Steel, Stainless Steel, Mild Steel, Hastelloy, Inconel, Monel Weld Neck Flanges., Check Below : Long Weld Neck Flange Bore & Dimensions.

Long Weld Neck Flanges

Long Weld Neck Flanges

ASME/ ANSI B16.5 Long Weld Neck Flanges latest price & specification

Price: US $0.2-10 / Piece

Size: 1/2" (15 NB) to 48" (1200NB)

Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, BS 4504, EN1092, UNI 2277/2278, DIN, B16.5-2009 B16.47-2006 asme asme 
API605-1988, mss sp 44-2006, csa Z245.12-05-2005, EN1092-1-2007 EN1759-1-2004, DIN2630 DIN2631 DIN2632 DIN2633 DIN2634 DIN2635 DIN2636 DIN2637 DIN2638, BS1560-3.1 BS4504-3.1-1989 -1989, Afnor nf E29-200-1-2007, ISO7005-1-1992, AS2129-2000, jis B2220-2004, Custom Drawings

Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.

Carbon Steel ASME B16.5 Long Weld Neck Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8

Stainless Steel ASME B16.5 Long Weld Neck Flanges: ASTM A182 F 202, F 304/ 304L/ 304H, F 316/316L, F 316H, F 316TI, F 310, F 321, F 904L

Alloy Steel ASME B16.5 Long Weld Neck Flanges: ASTM A182 F1, F5, F9, F11, F22, F91

Special Alloy ASME B16.5 Long Weld Neck Flanges:
Nickel Alloys ASME B16.5 Long Weld Neck Flanges: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II).
Duplex, Super Duplex ASME B16.5 Long Weld Neck Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205 (UNS No. S31803), 2507 (UNS No.S32750)

Copper Alloy ASME B16.5 Long Weld Neck Flanges: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C71500 (Cu -Ni- 70/30)

Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Flange Form: SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle, etc

Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized

Value Added Services: CNC Machining, Customised Flanges

ASME/ ANSI B16.5 Long Weld Neck Flanges manufacturing materials:

Dimensions Base Material Pressure Rating
ASME B16.5 ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
API 605 ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
ASME B16.47series A & B ASTM A182 (Forgings) ASTM A240 (Plate) 150#. 300#. 400#. 600#. 900#. 1500#. 2500#.
EN1092-1 ASTM A182 (Forgings) PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. PN250. PN320. PN400.
BS4504 BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160.
BS10 BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) Table D. Table E. Table F. Table H. Table J. Table K. Table R. Table S.Table T.

Typical Stainless Steel 18/8 Grade Designations:

ASTM BS DIN EURONORM
304 304S15 X5 Cr Ni 18 10 1.4301
304L 304S11 X2 Cr Ni 18 9 1.4307
316 316S31 X5 Cr Ni Mo 17 12 2 1.4401
316L 316S11 X2 Cr Ni Mo 17 13 2 1.4404
321 321S31 X6 Cr Ni 18 10 1.4541
316Ti 320S31 X6 Cr Ni Mo Ti 17 12 2 1.4571
SMO 254SMO X1 Cr Ni Mo Cu N 20 18 7 1.4547

ASME/ANSI B16.5 Long Neck Weld Flanges

FORM Forged, Threaded, Weld Neck, Lapped Joint, Long Neck Weld, Customised, BLRF Blind, SORF Slip On, Screwed or Threaded, Spectacle, Orifice, Ring Type Joint, Socket weld, Reducing, SWRF, Plate, Back up Flanges
ASME B16.5 Long Neck Weld Flanges size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Material Grade

Carbon Steel: A105, A694, A350 LF2 & LF3, ASTM A182 F1, F5, F9, F11, F22, F91, Stainless Steel : 304, 304L, 316L, UNS31803

Long Neck Weld Flanges Class / Pressure DIN:PN6 PN10 PN16 PN25 PN40; ANSI :  Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, 3000LB
DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc.
JIS : 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique Threaded, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing
AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Long Neck Weld Flanges Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
Long Neck Weld Flanges Origin West Europe / Japan / Indian / USA / Korean
Check Standard Dimensions

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A/6B, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, Table Dimensions

  • B.S : BS4504, BS3293, BS1560, BS10
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47 (API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • AS 2129: table D; table E; table H
  • The other standard:AWWA C207;EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
Key markets and industries for Long Neck Weld Flanges
  • Bitumen upgraders
  • Heavy oil refineries
  • Nuclear power (mostly seamless)
  • Petrochemicals and acids
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Long Weld Neck (WN) Flanges Dimensions:

  • Dimensions and tolerances in accordance with ANSI/ASME B16.5 for sizes 1/2″ to 24″.
  • Carbon steel forgings in accordance with ASTM A105.
  • Bolt circle diameters are 1/8 inch larger than bolt diameter.
  • Connection complies with ASME BPVC Section II, Section VIII Division 1 and ASTM A105.

Specification/ Dimension of ANSI, ASME, ASA, B16.5 WELDING NECK FLANGE RF

Pipe Size(NPS) OutsideDiameterof Flange A Diameter of Raised Face B Thickness of Flange C Diameter of Bore D Diameter of Hub at Base J Lengthof Hub K Nunberof Bolt Holes Diamete of Bolt Holes Bolt Circle Diameter P Approx. Weight
1/2 3 3/4 1 3/8 9/16 0.50 1 1/2 9 4 5/8 2 5/8 5
3/4 4 5/8 1 11/16 5/8 0.75 1 7/8 9 4 3/4 3 1/4 9
1 4 7/8 2 11/16 1.00 2 1/8 9 4 3/4 3 1/2 10
1 1/4 5 1/4 2 1/2 3/4 1.25 2 1/2 9 4 3/4 3 7/8 14
1 1/2 6 1/8 2 7/8 13/16 1.50 2 3/4 9 4 7/8 4 1/2 17
2 6 1/2 3 5/8 7/8 2.00 3 1/4 9 8 3/4 5 19
2 1/2 7 1/2 4 1/8 1 2.50 3 15/16 9 8 7/8 5 7/8 28
3 8 1/4 5 1 1/8 3.00 4 5/8 9 8 7/8 6 5/8 36
3 1/2 9 5 1/2 1 3/16 3.50 5 1/4 9 8 7/8 7 1/4 45
4 10 6 3/16 1 1/4 4.00 5 3/4 12 8 7/8 7 7/8 54
5 11 7 5/16 1 3/8 5.00 7 12 8 7/8 9 1/4 86
6 12 1/2 8 1/2 1 7/16 6.00 8 1/8 12 12 7/8 10 5/8 108
8 15 10 5/8 1 5/8 8.00 10 1/4 12 12 1 13 150
10 17 1/2 12 3/4 1 7/8 10.00 12 5/8 12 16 1 1/8 15 1/4 218
12 20 1/2 15 2 12.00 14 3/4 12 16 1 1/4 17 3/4 289
14 23 16 1/4 2 1/8 14.00 16 3/4 12 20 1 1/4 20 1/4 342
16 25 1/2 18 1/2 2 1/4 16.00 19 12 20 1 3/8 22 1/2 426
18 28 21 2 3/8 18.00 21 12 24 1 3/8 24 3/4 493
20 30 1/2 23 2 1/2 20.00 23 1/8 12 24 1 3/8 27 575
22 - - - - - - - - - -
24 36 27 1/4 2 3/4 24.00 27 5/8 12 24 1 5/8 32 823

Specifications, Dimensions Weld Neck Flanges


Long Weld Neck Flange Dimensions – Class 150 to Class 2500
Long Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.

  • Outer & Inner Diameter of body
  • Bolt Circle & Bolt hole Diameter
  • Thickness of weld end
  • Length of the Hub
  • Straightness and alignment of the bolt hole

Class 150 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 90 9.6 30 21.3 34.9 2 60.3 As Required 4 1/2 50 55 5/8 M14
3/4 20 100 11.2 38 26.7 42.9 2 69.9 As Required 4 1/2 50 65 5/8 M14
1 25 110 12.7 49 33.4 50.8 2 79.4 As Required 4 1/2 55 65 5/8 M14
1 1/4 32 115 14.3 59 42.2 63.5 2 88.9 As Required 4 1/2 55 70 5/8 M14
1 1/2 40 125 15.9 65 48.3 73 2 98.4 As Required 4 1/2 65 70 5/8 M14
2 50 150 17.5 78 60.3 92.1 2 120.7 As Required 4 5/8 70 85 3/4 M16
2 1/2 65 180 20.7 90 73 104.8 2 139.7 As Required 4 5/8 75 90 3/4 M16
3 80 190 22.3 108 88.9 127 2 152.4 As Required 4 5/8 75 90 3/4 M16
3 1/2 90 215 22.3 122 101.6 139.7 2 177.8 As Required 8 5/8 75 90 3/4 M16
4 100 230 22.3 135 114.3 157.2 2 190.5 As Required 8 5/8 75 90 3/4 M16
5 125 255 22.3 164 141.3 185.7 2 215.9 As Required 8 3/4 85 95 7/8 M20
6 150 280 23.9 192 168.3 215.9 2 241.3 As Required 8 3/4 85 100 7/8 M20
8 200 345 27 246 219.1 269.9 2 298.5 As Required 8 3/4 90 110 7/8 M20
10 250 405 28.6 305 273 323.8 2 362 As Required 12 7/8 100 115 1 M24
12 300 485 30.2 365 323.8 381 2 431.8 As Required 12 7/8 100 120 1 M24
14 350 535 33.4 400 355.6 412.8 2 476.3 As Required 12 1 115 135 1 1/8 M27
16 400 595 35 457 406.4 469.9 2 539.8 As Required 16 1 115 135 1 1/8 M27
18 450 635 38.1 505 457.2 533.4 2 577.9 As Required 16 1 1/8 125 145 1 1/4 M30
20 500 700 41.3 559 508 584.2 2 635 As Required 20 1 1/8 140 160 1 1/4 M30
24 600 815 46.1 663 610 692.2 2 749.3 As Required 20 1 1/4 150 170 1 3/8 M33

Class 300 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 95 12.7 38 21.3 34.9 2 66.7 As Required 4 1/2 55 65 5/8 M14
3/4 20 115 14.3 48 26.7 42.9 2 82.6 As Required 4 5/8 65 75 3/4 M16
1 25 125 15.9 54 33.4 50.8 2 88.9 As Required 4 5/8 65 75 3/4 M16
1 1/4 32 135 17.5 64 42.2 63.5 2 98.4 As Required 4 5/8 70 85 3/4 M16
1 1/2 40 155 19.1 70 48.3 73 2 114.3 As Required 4 3/4 75 90 7/8 M20
2 50 165 20.7 84 60.3 92.1 2 127 As Required 8 5/8 75 90 3/4 M16
2 1/2 65 190 23.9 100 73 104.8 2 149.2 As Required 8 3/4 85 100 7/8 M20
3 80 210 27 117 88.9 127 2 168.3 As Required 8 3/4 90 110 7/8 M20
3 1/2 90 230 28.6 133 101.6 139.7 2 184.2 As Required 8 3/4 95 110 7/8 M20
4 100 255 30.2 146 114.3 157.2 2 200 As Required 8 3/4 95 115 7/8 M20
5 125 280 33.4 178 141.3 185.7 2 235 As Required 8 3/4 110 120 7/8 M20
6 150 320 35 206 168.3 215.9 2 269.9 As Required 12 3/4 110 120 7/8 M20
8 200 380 39.7 260 219.1 269.9 2 330.2 As Required 12 7/8 120 140 1 M24
10 250 445 46.1 321 273 323.8 2 387.4 As Required 16 1 140 160 1 1/8 M27
12 300 520 49.3 375 323.8 381 2 450.8 As Required 16 1 1/8 145 170 1 1/4 M30
14 350 585 52.4 425 355.6 412.8 2 514.4 As Required 20 1 1/8 160 180 1 1/4 M30
16 400 650 55.6 483 406.4 469.9 2 571.5 As Required 20 1 1/4 165 190 1 3/8 M33
18 450 710 58.8 533 457 533.4 2 628.6 As Required 24 1 1/4 170 195 1 3/8 M33
20 500 775 62 587 508 584.2 2 685.8 As Required 24 1 1/4 185 205 1 3/8 M33
24 600 915 68.3 702 610 692.2 2 812.8 As Required 24 1 1/2 205 230 1 5/8 M39
 

Class 400 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 95 14.3 38 21.3 34.9 7 66.7 As Required 4 1/2 75 5/8 M14
3/4 20 115 15.9 48 26.7 42.9 7 82.6 As Required 4 5/8 90 3/4 M16
1 25 125 17.5 54 33.4 50.8 7 88.9 As Required 4 5/8 90 3/4 M16
1 1/4 32 135 20.7 64 42.2 63.5 7 98.4 As Required 4 5/8 95 3/4 M16
1 1/2 40 155 22.3 70 48.3 73 7 114.3 As Required 4 3/4 110 7/8 M20
2 50 165 25.4 84 60.3 92.1 7 127 As Required 8 5/8 110 3/4 M16
2 1/2 65 190 28.6 100 73 104.8 7 149.2 As Required 8 3/4 120 7/8 M20
3 80 210 31.8 117 88.9 127 7 168.3 As Required 8 3/4 125 7/8 M20
3 1/2 90 230 35 133 101.6 N/A 7 184.2 As Required 8 7/8 140 1 M24
4 100 255 35 146 114.3 157.2 7 200 As Required 8 7/8 140 1 M24
5 125 280 38.1 178 141.3 185.7 7 235 As Required 8 7/8 145 1 M24
6 150 320 41.3 206 168.3 215.9 7 269.9 As Required 12 7/8 150 1 M24
8 200 380 47.7 260 219.1 269.9 7 330 As Required 12 1 170 1 1/8 M27
10 250 445 54 321 273 323.8 7 387.4 As Required 16 1 1/8 190 1 1/4 M30
12 300 520 57.2 375 323.8 381 7 450.8 As Required 16 1 1/4 205 1 3/8 M33
14 350 585 60.4 425 355.6 412.8 7 514.4 As Required 20 1 1/4 210 1 3/8 M33
16 400 650 63.5 483 406.4 469.9 7 571.5 As Required 20 1 3/8 220 1 1/2 M36
18 450 710 66.7 533 457 533.4 7 628.6 As Required 24 1 3/8 230 1 1/2 M36
20 500 775 69.9 587 508 584.2 7 685.8 As Required 24 1 1/2 240 1 3/4 M39
24 600 915 76.2 702 610 692.2 7 812.8 As Required 24 1 3/4 265 1 7/8 M45

Class 600 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 95 14.3 38 21.3 34.9 7 66.7 As Required 4 1/2 75 5/8 M14
3/4 20 115 15.9 48 26.7 42.9 7 82.6 As Required 4 5/8 90 3/4 M16
1 25 125 17.5 54 33.4 50.8 7 88.9 As Required 4 5/8 90 3/4 M16
1 1/4 32 135 20.7 64 42.2 63.5 7 98.4 As Required 4 5/8 95 3/4 M16
1 1/2 40 155 22.3 70 48.3 73 7 114.3 As Required 4 3/4 110 7/8 M20
2 50 165 25.4 84 60.3 92.1 7 127 As Required 8 5/8 110 3/4 M16
2 1/2 65 190 28.6 100 73 104.8 7 149.2 As Required 8 3/4 120 7/8 M20
3 80 210 31.8 117 88.9 127 7 168.3 As Required 8 3/4 125 7/8 M20
3 1/2 90 230 35 133 101.6 N/A 7 184.2 As Required 8 7/8 140 1 M24
4 100 275 38.1 152 114.3 157.2 7 215.9 As Required 8 7/8 145 1 M24
5 125 330 44.5 189 141.3 185.7 7 266.7 As Required 8 1 165 1 1/8 M27
6 150 355 47.7 222 168.3 215.9 7 292.1 As Required 12 1 170 1 1/8 M27
8 200 420 55.6 273 219.1 269.9 7 349.2 As Required 12 1 1/8 190 1 1/4 M30
10 250 510 63.5 343 273 323.8 7 431.8 As Required 16 1 1/4 215 1 3/8 M33
12 300 560 66.7 400 323.8 381 7 489 As Required 20 1 1/4 220 1 3/8 M33
14 350 605 69.9 432 355.6 412.8 7 527 As Required 20 1 3/8 235 1 1/2 M36
16 400 685 76.2 495 406.4 469.9 7 603.2 As Required 20 1 1/2 255 1 5/8 M39
18 450 745 82.6 546 457 533.4 7 654 As Required 20 1 5/8 275 1 3/4 M42
20 500 815 88.9 610 508 584.2 7 723.9 As Required 24 1 5/8 285 1 3/4 M42

Class 900 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 120 22.3 38 21.3 34.9 7 82.6 As Required 4 3/4 110 7/8 M20
3/4 20 130 25.4 44 26.7 42.9 7 88.9 As Required 4 3/4 115 7/8 M20
1 25 150 28.6 52 33.4 50.8 7 101.6 As Required 4 7/8 125 1 M24
1 1/4 32 160 28.6 64 42.2 63.5 7 111.1 As Required 4 7/8 125 1 M24
1 1/2 40 180 31.8 70 48.3 73 7 123.8 As Required 4 1 140 1 1/8 M27
2 50 215 38.1 105 60.3 92.1 7 165.1 As Required 8 7/8 145 1 M24
2 1/2 65 245 41.3 124 73 104.8 7 190.5 As Required 8 1 160 1 1/8 M27
3 80 240 38.1 127 88.9 127 7 190.5 As Required 8 7/8 145 1 M24
4 100 290 44.5 159 114.3 157.2 7 235 As Required 8 1 1/8 170 1 1/4 M30
5 125 350 50.8 190 141.3 185.7 7 279.4 As Required 8 1 1/4 190 1 3/8 M33
6 150 380 55.6 235 168.3 215.9 7 317.5 As Required 12 1 1/8 190 1 1/4 M30
8 200 470 63.5 298 219.1 269.9 7 393.7 As Required 12 1 3/8 220 1 1/2 M36
10 250 545 69.9 368 273 323.8 7 469.9 As Required 16 1 3/8 235 1 1/2 M36
12 300 610 79.4 419 323.8 381 7 533.4 As Required 20 1 3/8 255 1 1/2 M36
14 350 640 85.8 451 355.6 412.8 7 558.8 As Required 20 1 1/2 275 1 5/8 M39
16 400 705 88.9 508 406.4 469.9 7 616 As Required 20 1 5/8 285 1 3/4 M42
18 450 785 101.6 565 457 533.4 7 685.8 As Required 20 1 7/8 325 2 M48
20 500 855 108 622 508 584.2 7 749.3 As Required 20 2 350 2 1/8 M52
24 600 1040 139.7 749 610 692.2 7 901.7 As Required 20 2 1/2 440 2 5/8 M64

Class 1500 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 120 22.3 38 21.3 34.9 7 82.6 As Required 4 3/4 110 7/8 M20
3/4 20 130 25.4 44 26.7 42.9 7 88.9 As Required 4 3/4 115 7/8 M20
1 25 150 28.6 52 33.4 50.8 7 101.6 As Required 4 7/8 125 1 M24
1 1/4 32 160 28.6 64 42.2 63.5 7 111.1 As Required 4 7/8 125 1 M24
1 1/2 40 180 31.8 70 48.3 73 7 123.8 As Required 4 1 140 1 1/8 M27
2 50 215 38.1 105 60.3 92.1 7 165.1 As Required 8 7/8 145 1 M24
2 1/2 65 245 41.3 124 73 104.8 7 190.5 As Required 8 1 160 1 1/8 M27
3 80 265 47.7 133 88.9 127 7 203.2 As Required 8 1 1/8 180 1 1/4 M30
4 100 310 54 162 114.3 157.2 7 241.3 As Required 8 1 1/4 195 1 3/8 M33
5 125 375 73.1 197 141.3 185.7 7 292.1 As Required 8 1 1/2 250 1 5/8 M39
6 150 395 82.6 229 168.3 215.9 7 317.5 As Required 12 1 3/8 260 1 1/2 M36
8 200 485 92.1 292 219.1 269.9 7 393.7 As Required 12 1 5/8 290 1 3/4 M42
10 250 585 108 368 273 323.8 7 482.6 As Required 12 1 7/8 335 2 M48
12 300 675 123.9 451 323.8 381 7 571.5 As Required 16 2 375 2 1/8 M52
14 350 750 133.4 495 355.6 412.8 7 635 As Required 16 2 1/4 405 2 3/8 M56
16 400 825 146.1 552 406.4 469.9 7 704.8 As Required 16 2 1/2 445 2 5/8 M64
18 450 915 162 597 457 533.4 7 774.7 As Required 16 2 3/4 495 2 7/8 M72
20 500 985 177.8 641 508 584.2 7 831.8 As Required 16 3 540 3 1/8 M76
24 600 1170 203.2 762 610 692.2 7 990.6 As Required 16 3 1/2 615 3 5/8 M90

Class 2500 Long Weld Neck Flange Dimensions

Size in Inch Size in mm Outer Dia. Flange Thick. Hub OD Weld Neck OD RF Dia. RF Height PCD Hub Length No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size
A B C D E F G H
1/2 15 135 30.2 43 21.3 34.9 7 88.9 As Required 4 3/4 120 7/8 M20
3/4 20 140 31.8 51 26.7 42.9 7 95.2 As Required 4 3/4 125 7/8 M20
1 25 160 35 57 33.4 50.8 7 108 As Required 4 7/8 140 1 M24
1 1/4 32 185 38.1 73 42.2 63.5 7 130.2 As Required 4 1 150 1 1/8 M27
1 1/2 40 205 44.5 79 48.3 73 7 146 As Required 4 1 1/8 170 1 1/4 M30
2 50 235 50.9 95 60.3 92.1 7 171.4 As Required 8 1 180 1 1/8 M27
2 1/2 65 265 57.2 114 73 104.8 7 196.8 As Required 8 1 1/8 195 1 1/4 M30
3 80 305 66.7 133 88.9 127 7 228.6 As Required 8 1 1/4 220 1 3/8 M33
4 100 355 76.2 165 114.3 157.2 7 273 As Required 8 1 1/2 255 1 5/8 M39
5 125 420 92.1 203 141.3 185.7 7 323.8 As Required 8 1 3/4 300 1 7/8 M45
6 150 485 108 235 168.3 215.9 7 368.3 As Required 8 2 345 2 1/8 M52
8 200 550 127 305 219.1 269.9 7 438.2 As Required 12 2 380 2 1/8 M52
10 250 675 165.1 375 273 323.8 7 539.8 As Required 12 2 1/2 490 2 5/8 M64
12 300 760 184.2 441 323.8 381 7 619.1 As Required 12 2 3/4 540 2 7/8 M72

Type Of Long Welding Neck Flanges Available At Best Price