Incoloy 825 Pipe Fittings

Incoloy 825 Pipe Fittings

Get Alloy 825 Elbow best price from certified Indian manufacturers, Refer Sizes and Weight Chart of UNS N08825 Tee

Pipe fittings are devices that are joined or installed to sections of piping equipment to control the flow of media in the system. The Incoloy 825 Pipe Fittings have a higher nickel content with good amounts of chromium that allows them to resist stress corrosion cracking caused by chlorides. The austenitic Incoloy 825 Fittings also have good contents of molybdenum and copper that allow them to resist any reducing agents and acids. These fittings resist oxidizing conditions and are less critical to sensitization in temperatures up to 760 degrees C. Alloy 825 Fittings work well in different pressures, and they can be utilized in different pressure vessel applications. These fittings have excellent mechanical properties, both in a room and at elevated temperatures up to 1000 degrees F. The ASME SB 366 UNS N08825 grade has good formability and can be readily welded following standard fabrication techniques. They are common in chemical processing, pollution control, oil and gas piping systems, nuclear fuel reprocessing, etc.

Leading Supplier of Nickel Alloy 825 Buttweld Fittings in Mumbai, Refer Price list of DIN 2.4858 Concentric/ Eccentric Reducer

The Alloy 825 Elbow is one of the most common types of pipe fittings. These elbows play a pivotal role in changing and routing the flow of media in the system. They are generally designed in 45, 90, 180, 22.5 and have customizable specifications. ASTM B366 UNS N08825 Buttweld Elbow is the high-strength grade that acts as a continuous metal structure. These elbows are produced in either long or short radius specifications. They have beveled ends and create a full penetration weld without requiring any extra protection.

We supply DIN 2.4858 End Cap with MTC Certificate, Check Chemical and Mechanical Properties of Alloy 825 Buttweld Elbow


ASTM B366 Incoloy 825 fittings

ASTM B366 Incoloy 825 fittings

Alloy 825 Buttweld Fittings

Alloy 825 Buttweld Fittings

UNS N08825 Seamless Fittings

UNS N08825 Seamless Fittings



Incoloy 825 Pipe Fittings Specification

Specifications Incoloy 825 Pipe Fittings
Schedule SCH 5S/ SCH 10S/ SCH 40S/ SCH 80S/ SCH 160S/ SCH XXS
Types Of Coating Anti-rust Paint
Zinc Plated
Oil Black Paint
Yellow Transparent
Cold and Hot Dip Galvanized
RSC Transportation In Air And Ocean
Manufacturing Productivity 700 ton per month
Size Of Manufacturer Buttweld (BW) ½" NB to 120" NB
Seamless (SMLS) ½” to 26”
Welded (Weld) ½” to 80”
Manufacturer Standard & Dimension ASME B16.28/ ASME B16.9/ ASME B16.11
Use In Oil and Gas
Petrochemical/ Refinery/Chemical
Process Instrumentation
Marine & dredging
Sanitation
Power etc.
Brand Ramesh Steel Corrporation
Supply Ability 600 Ton Per Month
Types Of Incoloy 825 Fitting manufacturer in India Pipe Tee ( Reducing, Equal, Unequal, Lateral, Straight, Barred, Split)
Pipe Cap (Square/ Round/ Rectangular/ “U” Shape/ “I” Shape/ Oval End)
Pipe Reducer (Eccentric And Concentric)
Pipe Elbow (45 Deg/ 90 Deg/ 180 Deg/ With Long Radius & Short Radius)
We Have Forging Production Technique Forged/ Heat treated and machined
Available Packing Plywood Box And Plywood Pallet

Alloy 825 fittings Price In India

Description Unit Quantity Price In (INR) Per Unit Price In US ($) Per Unit
Alloy 825 6 X 4 S/40s Red Tee KGS 16 6,578 US $84.06
Alloy 825, Elbow 6 X 0.280 Smls KGS 102 2,917 US $34.72
ALLOY 825 6 S/40S LR 90 KGS 21 6,920 US $88.43
Alloy 825, 6 X 0.280 Smls, Pe SRL KGS 298 2,717 US $36.12
Alloy 825-2nb Sch80 180 Deg Pipe KGS 42 5,094 US $65.10
Bw Red.tee, 159 X 44.5mm X 3.0/2.0mm KGS 45 2,179 US $27.85
Bw Red.tee, 76.1 X 38MM X 3.0/2.0MM KGS 2 2,723 US $34.80
Red. Tee, 219.1 X 4/108 X 3MM KGS 85 2,813 US $35.95
Bw Red.tee, 76.1 X 44.5MM X 3.0/2.0MM KGS 2 1,860 US $23.77

Types Of Alloy 825 Buttweld Fittings

Nickel Alloy 825 90° Long Radius Elbow

Nickel Alloy 825 90° Long Radius Elbow

Alloy 825 45° Short Radius Elbow

Alloy 825 45° Short Radius Elbow

Incoloy 825 Elbow

Incoloy 825 Elbow

Inconel 825 Equal Tee

Inconel 825 Equal Tee

ASTM B366 UNS N08825 Reducing Tee

ASTM B366 UNS N08825 Reducing Tee

Alloy 825 Concentric Reducer

Alloy 825 Concentric Reducer

Incoloy Eccentric Reducer

Incoloy Eccentric Reducer

Incoloy 825 End Cap

Incoloy 825 End Cap

UNS N08825 Return Bends

UNS N08825 Return Bends

DIN 2.4858 Welded Fitting

DIN 2.4858 Welded Fitting

Inconel 825 Buttweld Fitting

Inconel 825 Buttweld Fitting

ASME SB 366 N08825 Seamless Fitting

ASME SB 366 N08825 Seamless Fitting


Nickel Alloy 825 Fittings Advantages

  • Great mechanical properties at both room and raised temperatures up to around 1000°F.
  • Magnificent protection from lessening and oxidizing acids.
  • Acceptable protection from confined assault like pittLQPing and cleft consumption.
  • Exceptionally impervious to sulfuric and phosphoric acids.
  • Authorization for pressure-vessel use at wall temperatures up to 800°F.

Where Are UNS N08825 Seamless Fittings Used?

  • Thermal Processing
  • Aerospace
  • Chemical Processing
  • Power Generation
  • Refineries And Petrochemicals


ASTM B366 Incoloy Fittings Properties

  • Specific Heat Capacity: 440 J/kg.°C
  • Electrical Resistivity: 1.13m
  • Density: 8.14 g/cm³
  • Melting Range: 1370-1400°C

Incoloy 825 Tube Heat Treatment

Incoloy 825 Pipe Fittings is stabilise annealed at 940°C. The softest structure is obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitisation.


Inconel 825 Elbow Equivalent

STANDARD GOST EN JIS BS OR WERKSTOFF NR. UNS AFNOR
Incoloy 825 Pipe Fittings ЭП703 NiCr21Mo NCF 825 NA 16 XH38BT 2.4858 N08825 NFE30C20DUM


Buy directly Incoloy 825 Pipe Fittings from manufacturers in Mumbai. Want to procure from leading ASTM B366 UNS N08825 Equal/ Reducing Tee supplier in India?

Incoloy 825 Pipe Fittings Chemical Composition

Carbon ≤0.05
Nickel 38.0-46.0
Chromium 19.5-23.5
Aluminum ≤0.20
Titanium 0.6-1.2
Silicon ≤0.50
Iron ≥22.0
Molybdenum 2.5-3.5
Copper 1.5-3.0
Manganese ≤1.00
Sulfur ≤0.030

Nickel Alloy 825 Tee Mechanical Properties

Tensile Strength, (minimum) Yield Strength, (minimum) Elongation, (minimum) Elastic Modulus
% Gpa 106psi Mpa ksi Mpa ksi
45 206 29.8 690 100 310 45

Incoloy 825 Pipe Fittings Dimensions

Incoloy 825 Pipe Fittings Dimensions

NPS In Inches O.D. Wall Thickness Of (T) 90 Degree Elbows 90 Degree Returns 45 Degree
Elbows
Pipe Tee Pipe Cap Pipe Cross Pipe Stub Ends
ST XS 160 XX Long R
A
Short R
A
Long R
K
Short R
K
B C E C F G
1/2 0.840 0.109 0.147 1-1/2 1-15/16 5/8 1 1 3 1-3/8
3/4 1.050 0.113 0.154 0.308 1-1/8 1-11/16 7/16 1-1/8 1-1/4 3 1-11/16
1 1.315 0.133 0.179 0.250 0.358 1-1/2 1 2-3/16 1-5/8 7/8 1-1/2 1-1/2 4 2
1-1/4 1.660 0.140 0.191 0.250 0.382 1-7/8 1-1/4 2-3/4 2-11/16 1 1-7/8 1-1/2 1-7/8 4 2-1/2
1-1/2 1.900 0.145 0.200 0.281 0.400 2-1/4 1-1/2 3-1/4 2-7/16 1-1/8 2-1/4 1-1/2 2-1/4 4 2-7/8
2 2.375 0.154 0.218 0.344 0.436 3 2 4-3/16 3-3/16 1-3/8 2-1/2 1-1/2* 2-1/2 6 3-5/8
2-1/2 2.875 0.203 0.276 0.375 0.552 3-3/4 2-1/2 5-3/16 3-15/16 1-3/4 3 1-1/2 3 6 4-1/8
3 3.500 0.216 0.300 0.438 0.600 4-1/2 3 6-1/4 4-3/4 2 3-3/8 2* 3-3/8 6 5
3-1/2 4.000 0.226 0.318 0.636 5-1/4 3-1/2 7-1/4 5-1/2 2-1/4 3-3/4 2-1/2* 3-3/4 6 5-1/2
4 4.500 0.237 0.337 0.531 0.674 6 4 8-1/4 6-1/4 2-1/2 4-1/8 2-1/2* 4-1/8 6 6-3/16
5 5.563 0.258 0.375 0.625 0.750 7-1/2 5 10-5/16 7-3/4 3-1/8 4-7/8 3* 4-7/8 8 7-5/16
6 6.625 0.280 0.432 0.719 0.864 9 6 12-5/16 9-5/16 3-3/4 5-5/8 3-1/2* 5-5/8 8 8-1/2
8 8.625 0.322 0.500 0.906 0.875 12 8 16-5/16 12-5/16 5 7 4* 7 8 10-5/8
10 10.750 0.365 0.500 1.125 1.000 15 10 20-3/8 15-3/8 6-1/4 8-1/2 5* 8-1/2 10 12-3/4
12 12.750 0.375 0.500 1.312 1.000 18 12 24-3/8 18-3/8 7-1/2 10 6* 10 10 15
14 14.000 0.375 0.500 21 14 28 21 8-3/4 11 6-1/2* 11 12 16-1/4
16 16.000 0.375 0.500 24 16 32 24 10 12 7* 12 12 18-1/2
18 18.000 0.375 0.500 27 18 36 27 11-1/4 13-1/2 8* 13-1/2 12 21
20 20.000 0.375 0.500 30 20 40 30 12-1/2 15 9* 15 12 23
22 22.000 0.375 0.500 33 44 13-1/2 16-1/2 10 16-1/2
24 24.000 0.375 0.500 36 24 48 36 15 17 10-1/2 17 12 27-1/4
26 26.000 0.375 0.500 39 52 16 19-1/2 10-1/2 19-1/2
30 30.000 0.375 0.500 45 30 60 45 18-1/2 22 10-1/2 22
34 34.000 0.375 0.500 51 21 25 10-1/2 25
36 36.000 0.375 0.500 54 36 54 22-1/4 26-1/2 10-1/2
42 42.000 0.375 0.500 63 42 26 12


Weight Of Incoloy 825 Fittings In KG

Normal Pipe Size Weight Per LBS Weight Per Kilogram
1/2 0.18 0.08
3/4 0.19 0.09
1 0.4 0.18
1.1/4 0.6 0.27
1.1/2 0.9 0.41
2 1.6 0.73
2.1/2 3.25 1.47
3 5 2.27
3.1/2 6.75 3.06
4 9 4.08
5 15 6.8
6 24.5 11.11
8 50 22.68
10 88 39.92
12 125 56.7
14 160 72.57
16 206 93.44
18 260 117.93
20 320 145.15
22 394 178.72
24 460 208.65
26 550 249.48
30 734 332.94
36 1062 481.72

Are you looking for ASME B16.9 Incoloy 825 Buttweld Fittings Manufacturer, We are Distributor and Stockholder of Nickel 825 Long/ Short Stub End

WNR 2.4858 End Cap Size Chart

Outside Diameter sizeAnd High Thickness (WT) Of (E)
(DN) (NPS) (E) (E1) (E)
15 1/2 25 25 3.73
20 3/4 25 25 3.91
25 1 38 38 4.55
32 11/4 38 38 4.85
40 11/2 38 38 5.08
50 2 38 44 5.54
65 21/2 38 51 7.01
80 3 51 64 7.62
90 31/2 64 76 8.08
100 4 64 76 8.56
125 5 76 89 9.53
150 6 89 102 10.97
200 8 102 127 12.7
250 10 127 152 12.7
300 12 152 178 12.7
350 14 165 191 12.7
400 16 178 203 12.7
450 18 203 229 12.7
500 20 229 254 12.7
550 22 254 254 12.7
600 24 267 305 12.7
650 26 267 - -
700 28 267 - -
750 30 267 - -
800 32 267 - -
850 34 267 - -
900 36 267 - -
950 38 305 - -
1000 40 305 - -
1050 42 305 - -
1100 44 343 - -
1150 46 343 - -
1200 48 343 - -
  • Size: 1/2 to 56"
  • Pressure: schedule 5 to schedule 160
  • Max. wall thickness: 200 millimeter
  • Thickness (WT): SCH 10 To schedule 80s

ASME SB 366 N08825 Reducer Hot Working

Hot working might be finished yet ought to be achieved at temperatures under 1700 °F (927 °C) to keep up with ideal erosion obstruction of the amalgam.