DIN 2633 Flange

DIN 2633 Flange

Leading DIN 2633 PN25 Weld Neck Flange and DIN 2633 Pn16 LWNRF Flanges Manufacturer in India

The DIN 2633 is a configuration covering standard weld neck flanges. A DIN 2633 Flange is circumferentially welded in the system. These flanges have a long tapered hub that possesses superior strength and load-bearing capacity. The DIN 2633 Weld Neck Flange is usually butt-welded in place. These flanges connect the bore of the pipe to the flange and reduce any turbulence or erosion on the interior of the piping system. These flanges provide support to different piping equipment as there is a movement of high pressure and temperatures media in the system. A DIN 2633 Long Weld Neck Flange has an extended neck that has a bigger boring extension that makes it longer in comparison to a standard weld neck flange type. These flanges are utilized as a nozzle for barrels or columns. They are quality assured and can be customized as per product requirements. The DIN 2633 Welding Neck Flanges are designed in sizes between 15NB to 1200NB. These flanges are commonly seen in nuclear power systems, heavy oil refineries, bitumen upgraders, petrochemicals, thermal plants, solar power plants, defense, aerospace, etc.

Check Sizes and Dimensions of DIN 2633 Type C WNRF Flanges

The DIN 2633 Pn16 Welding Neck Flange is designed to work in maximum temperatures up to 120 degrees C, having working pressures up to 16 bar. The Pn in this grade refers to nominal pressure determining the pressure holding capacity of the grade. A DIN 2633 Pn16 Form C determines the pressure holding capacity and the flange pressure ratings. All these flanges can be customized in different shapes and sizes as per product requirements. These components are designed by our esteemed workers making use of the latest technology and the best raw materials.

Supplier of EN 1092-1 DIN 2633 Pn16 Welding Neck Flange are the german standard flanges, call directly for DIN 2633 Pn10 Material manufacturer in India for custom sizes and price list

DIN 2633 Flange

DIN 2633 Flange


DIN 2633 PN25 Weld Neck Flange

DIN 2633 PN25 Weld Neck Flange


DIN 2633 Pn16 LWNRF Flanges

DIN 2633 Pn16 LWNRF Flanges



DIN 2633 Pipe Flange Specification

Specification DIN 2633 Flanges
Face Type FF/ RTJ/ RF/ Male & Female / lap joint/ Tongue & Groove.
Production Technique Heat treated, Forged, Machined
Supporting Material Ring Joint/ Gasket/ Flanges Bolts
Flanges Test UI trasonic flaw detector/ Hydrostatic testing machine/ Direct-reading Spectrograph/ X-ray detector/ Magnetic particle detector
Manufacturer of Screwed / Forged/ Plate/ Threaded
Flanges Equipment Press machine/ Pushing Machine/ Bending machine/ electric bevelling machine/ Sand-blasting machine etc
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Coating Anti-rust Paint/ Hot and Cold Dip Galvanized/ Oil Black Paint/ Zinc Plated/ Yellow Transparent
Forging Methods Rolling/ Forging/ Casting/ Cutting
Schedule Schedule 5S upto XXS
Manufacturer Length NPS 1⁄₂" upto NPS 48”
Application Bitumen upgraders
Heavy oil refineries
Nuclear power (mostly seamless)
Petrochemicals and acids

DIN 2633 Welding Neck Flange Price

Nominal Diameter Pitch Circle Diameter (mm) Nominal pipe size (mm) Standard Thread holes Pressure Price
DN 20 75 3/4" (26,9) DIN 2633 4 x 14 mm Ø PN 16 496.00
DN 25 85 1" (33,7) - 4 x 14 mm Ø - 634.00
DN 32 100 1.1/4" (42,4) - 4 x 18 mm Ø - 996.00
DN 40 110 1.1/2" (48,3) - 4 x 18 mm Ø - 1689.00
DN 50 125 2" (60,3) - 4 x 18 mm Ø - 3689.00
DN 65 145 76,1 - 4 x 18 mm Ø - 2252.00
DN 80 160 88,9 - 8 x 18 mm Ø - 5980.00
DN 100 180 108 - 8 x 18 mm Ø - 3563.00
DN 100 180 114,3 - 8 x 18 mm Ø - 6292.00
DN 125 210 133 - 8 x 18 mm Ø - 4279.00
DN 125 210 139,7 - 8 x 18 mm Ø - 2259.00
DN 150 240 159 - 8 x 22 mm Ø - 5585.00
DN 150 240 168,3 - 8 x 22 mm Ø - 6665.00
DN 200 295 219,1 DIN 2633 12 x 22 mm Ø PN 16 6978.00

Flange DIN 2633 Types

DIN 2633 Weld Neck Flange Pn16

DIN 2633 Weld Neck Flange Pn16

DIN 2633 Pn6 Flange

DIN 2633 Pn6 Flange

DIN 2633 Long Weld Neck Flange

DIN 2633 Long Weld Neck Flange

DIN 2633 Welding Neck Flanges

DIN 2633 Welding Neck Flanges

Flange Dn65 Pn16 DIN 2633

Flange Dn65 Pn16 DIN 2633

DIN 2633 Pn16 Dn100 Flange

DIN 2633 Pn16 Dn100 Flange


DIN 2633 PN16 Flange Dimensions

DIN 2633 PN16 Flange Dimensions PDF

Pipe Flanges Neck Raised face Screws Weight
(7,85 Kg/dm3)
Rated d1 b D h1 k s d3 h2 r d4 f Thread Holes d2 Kg
Diameter ISO Series DIN Series
15 - 20 14 95 35 65 2 30 6 4 45 2 M 12 4 14 0,648
21,3 - 32
20 - 25 16 105 38 75 2,3 38 6 4 58 2 M 12 4 14 0,952
26,9 - 40
25 - 30 16 115 38 85 2,6 42 6 4 68 2 M 12 4 14 1,14
33,7 - 45
32 - 38 16 140 40 100 2,6 52 6 6 78 2 M 16 4 18 1,69
42,4 - 56
40 - 44,5 16 150 42 110 2,6 60 7 6 88 3 M 16 4 18 1,86
48,3 - 64
50 - 57 18 165 45 125 2,9 72 8 6 102 3 M 16 4 18 2,53
60,3 - 75
65 76,1 - 18 185 45 145 2,9 90 10 6 122 3 M 16 4 18 3,06
80 88,9 - 20 200 50 160 3,2 105 10 8 138 3 M 16 8 18 3,7
100 - 108 20 220 52 180 3,6 125 12 8 158 3 M 16 8 18 4,62
114,3 - 131
125 - 133 22 250 55 210 4 150 12 8 188 3 M 16 8 18 6,3
139,7 - 156
150 - 159 22 285 55 240 4,5 175 12 10 212 3 M 20 8 22 7,75
168,3 - 184
200 219,1 - 24 340 62 295 5,9 235 16 10 268 3 M 20 8 22 11,3
250 - 267 26 395 68 350 6,3 285 16 12 320 3 M 20 12 22 14,7
273 - 292
300 323,9 - 26 445 68 400 7,1 344 16 12 370 4 M 20 12 22 17,4
350 355,6 - 26 505 68 460 7,1 385 16 12 430 4 M 20 16 22 23,6
- 368 21,6
400 406,4 - 26 565 72 515 7,1 440 16 12 482 4 M 24 16 26 28,6
- 419 26,2
(450) 457 - 28 615 72 565 7,1 488 16 12 532 4 M 24 20 26 31,5
500 508 - 28 670 75 620 7,1 542 16 12 585 4 M 24 20 26 38,1
600 610 - 28 780 80 725 7,1 642 18 12 685 5 M 27 20 30 44,6
700 711 - 30 895 80 840 8 745 18 12 800 5 M 27 24 30 62,4
800 813 - 32 1015 90 950 8 850 18 12 905 5 M 30 24 33 84,1
900 914 - 34 1115 95 1050 10 950 20 12 1005 5 M 30 28 33 98,5
1000 1016 - 34 1230 95 1160 10 1052 20 16 1110 5 M 33 28 36 115

DIN 2633 Flange Bolt Dimensions

DIN 2633 Flange Bolt Dimensions

Size Size Bolts Number UNC Bolt Size RF Stud Length ISO Stud Size Machine Bolts Length
Class 150 Flange
1/2 Inches 15 milimeter 4 1/2 55 M14 50
3/4 Inches 20 milimeter 4 1/2 65 M14 50
1 Inches 25 milimeter 4 1/2 65 M14 55
1 1/4 Inches 32 milimeter 4 1/2 70 M14 55
1 1/2 Inches 40 milimeter 4 1/2 70 M14 65
2 Inches 50 milimeter 4 5/8 85 M16 70
2 1/2 Inches 65 milimeter 4 5/8 90 M16 75
3 Inches 80 milimeter 4 5/8 90 M16 75
3 1/2 Inches 90 milimeter 8 5/8 90 M16 75
4 Inches 100 milimeter 8 5/8 90 M16 75
5 Inches 125 milimeter 8 3/4 95 M20 85
6 Inches 150 milimeter 8 3/4 100 M20 85
8 Inches 200 milimeter 8 3/4 110 M20 90
10 Inches 250 milimeter 12 7/8 115 M24 100
12 Inches 300 milimeter 12 7/8 120 M24 100
14 Inches 350 milimeter 12 1 135 M27 115
16 Inches 400 milimeter 16 1 135 M27 115
18 Inches 450 milimeter 16 1 1/8 145 M30 125
20 Inches 500 milimeter 20 1 1/8 160 M30 140
24 Inches 600 milimeter 20 1 1/4 170 M33 150

Size Size Bolts Number UNC Bolt Size RF Stud Length ISO Stud Size Machine Bolts Length
Class 300 Flange
1/2 Inches 15 milimeter 4 1/2 65 M14 55
3/4 Inches 20 milimeter 4 5/8 75 M16 65
1 Inches 25 milimeter 4 5/8 75 M16 65
1 1/4 Inches 32 milimeter 4 5/8 85 M16 70
1 1/2 Inches 40 milimeter 4 3/4 90 M20 75
2 Inches 50 milimeter 8 5/8 90 M16 75
2 1/2 Inches 65 milimeter 8 3/4 100 M20 85
3 Inches 80 milimeter 8 3/4 110 M20 90
3 1/2 Inches 90 milimeter 8 3/4 110 M20 95
4 Inches 100 milimeter 8 3/4 115 M20 95
5 Inches 125 milimeter 8 3/4 120 M20 110
6 Inches 150 milimeter 12 3/4 120 M20 110
8 Inches 200 milimeter 12 7/8 140 M24 120
10 Inches 250 milimeter 16 1 160 M27 140
12 Inches 300 milimeter 16 1 1/8 170 M30 145
14 Inches 350 milimeter 20 1 1/8 180 M30 160
16 Inches 400 milimeter 20 1 1/4 190 M33 165
18 Inches 450 milimeter 24 1 1/4 195 M33 170
20 Inches 500 milimeter 24 1 1/4 205 M33 185
24 Inches 600 milimeter 24 1 1/2 230 M39 205

Symbol Of DIN 2633 Blind Flange

Symbol Of DIN 2633 Blind Flange

DIN 2633 PN40 Dimensions

DIN 2633 PN40 Dimensions

DIN 2633 Flange Material

  • Carbon steel: ST 37.2, S235JR
  • Stainless Steel: 304L (1.4306), 316L (1.4404), SS 304 (1.4301), 316 (1.4401)
    410 (1.4000), 347 (1.4550), 321 (1.4541), 254 SMO (1.4547),
    Super Duplex Stainless Steel (1.4410), Duplex Stainless Steel (1.4462), 904(1.7440)
  • Alloy: Nickel Alloy 200 (2.4066), Copper (2.0090), Monel 400 (2.4360),
    Inconel 600 (2.4816), Incoloy 800 (1.4876), Inconel 625 (2.4856), Incoloy 825,
    Hastelloy C 276 (2.4819), Hastelloy B2 (2.4617), Titanium Gr.2 (3.7025)

Applications Of DIN 2633 Flange

  • Specialty Chemicals
  • Power Generation
  • Condensers
  • Chemical Equipment
  • Gas Processing
  • Pulp and Paper Industry
  • Sea Water Equipment
  • Pharmaceutical Equipment
  • Off-Shore Oil Drilling Companies
  • Petrochemicals
  • Heat Exchangers
  • Pharmaceuticals

DIN 2633 Welding Neck Flanges Pressure Rating

DIN 2633 Welding Neck Flanges Pressure Rating

Check Pressure Rating and Price list of DIN 2633 flanges and DIN 2633 Welding Neck Flanges

DIN 2633 PN25 Dimensions

DIN 2633 PN25 Dimensions

Blind Flange DIN 2633 Dimensional Tolerances

1) Tolerance Of I.D (Inside Bore Diameter):

  • for 100 (mm) < I.D ≤ 400 (mm), +1.0 (mm)(other types) while -1.5 (mm)(weld neck types).
  • for I.D ≤ 100 (mm), ±0.5 (mm)(other types) while -1.0 (mm)(weld neck types).
  • for I.D > 400 (mm), +1.5 (mm)(other types) while -2.0 (mm)(weld neck types).

2) Tolerance Of O.D (Outside Diameter):

  • for 200 millimeter < O.D ≤ 300 millimeter , ±1.5 millimeter (faced) while ±2.0 millimeter (not faced).
  • for O.D ≤ 200 millimeter , ±1.0 millimeter (faced) while ±2.0 millimeter (not faced).
  • for O.D > 400 millimeter , ±2.0 millimeter (faced) while ±5.0 millimeter (not faced).
  • for 300 millimeter < O.D ≤ 400 millimeter , ±2.0 millimeter (faced) while ±3.0 millimeter (not faced).

3) Tolerance Of Flange Overall H (Height):

  • for 80 (mm)< H ≤ 250 (mm), ±2.0 (mm).
  • for H ≤ 80 (mm), ±0.5 (mm).
  • for H > 250 (mm), ±3.0 (mm).

4) Tolerance Of Flange (T) (Thickness):

  • for 10 millimeter < t ≤ 20 millimeter , ±0.8 millimeter (both sides) while ±1.3 millimeter (one side).
  • for t ≤ 10 millimeter , ±0.5 millimeter (both sides) while ±1.0 millimeter (one side).
  • for 30 millimeter < t ≤ 50 millimeter , ±1.0 millimeter (both sides) while ±1.5 millimeter (one side).
  • for W.T > 50 millimeter , ±1.5 millimeter (both sides) while ±2.0 millimeter (one side).
  • for 20 millimeter < t ≤ 30 millimeter , ±1.0 millimeter (both sides) while ±1.5 millimeter (one side).

5) Tolerance Of Diameter Of G (Raised Face):

  • for 80 (mm) < g ≤ 300 (mm), -2.0 (mm).
  • for g ≤ 80 (mm), -1.0 (mm).
  • for g > 300 (mm), -3.0 (mm).

DIN 2633 PN10 Flange Dimensions

DIN 2633 PN10 Flange Dimensions PDF

DIN 2633 Flange Weight

DIN 2633 Flange Weight

Groove, Tongue, RJ, Raised, RTJ, Flat Face Dn100 & Dn80 DIN 2633 Pn25 Weld Neck Flange manufacturer in India

DIN 2633 Flange Gasket Chart

DIN 2633 Flange Gasket

Normal Size Pipe Inner Daimeter Gasket
Outer Daimeter Gasket
Class 400#/ LB Class 150#/ LB Class 600#/ LB Class 300#/ LB Class 900#/ LB
1/2 0.84 2.125 1.875 2.125 2.125 2.50
3/4 1.06 2.625 2.25 2.625 2.625 2.75
1 1.31 2.875 2.625 2.875 2.875 3.125
1 1/4 1.66 3.25 3 3.25 3.25 3.50
1 1/2 1.91 3.75 3.375 3.75 3.75 3.875
2 2.38 4.375 4.125 4.375 4.375 5.625
2 1/2 2.88 5.125 4.875 5.125 5.125 6.50
3 3.50 5.875 5.375 5.875 5.875 6.625
4 4.50 7.00 6.875 7.625 7.125 8.125
5 5.56 8.375 7.75 9.50 8.50 9.75
6 6.62 9.75 8.75 10.50 9.875 11.375
8 8.62 12.00 11 12.625 12.125 14.125
10 10.75 14.125 13.375 15.75 14.25 17.125
12 12.75 16.50 16.125 18.00 16.625 19.625

DIN 2633 Equivalent ASME

C22.8 A105 P250GH SA105
15Mo3 16Mo3
13CrMo44 A182F12 13CrMo4-5 SA182F12
10CrMo910 A182F22 11CrMo9-10 SA182F22
1.4901 A182F92 SA182F92 X10CrWMoVNb9-2
1.4903 A182F91 SA182F91 X10CrMoVNb9-1
1.4905 E911 X11CrMoVWNb9-11
1.4910 X6CrNiMoN17-12-2
1.4922 X20CrMoV11-1
1.4923 X22CrMoV12-1
1.4948 X6CNi18-10
1.4981 X8CrNiMoNb16-6
1.4988 X8CrNiMoVNb16-13
1.6311 20MnMoNi45
1.6368 WB36 15NiCuMoNb5
W/TSTE355 A350LF2 P355 SA350LF2
W/TSTE420 P420
W/TSTE460
12CrMo19.5 (V/G) A182/ F5 SA182/ F5
1.5637 12Ni14
1.7715 14MoV63
ST 52.3 S355J2 N
42CrMo4
25CrMo4
14MoV63
10Ni14 / 12Ni14

DIN 2633 PN16 Weld Neck Flanges Dimensions

DIN 2633 PN16 Weld Neck Flanges Dimensions

NPS
Flanges Diameter
Pipe Outer Diameter
d1
Flanges Dimensions Hub Dimensions Raised Face Bolting Dimensions Weight
(DN) (DIN) (ISO) (K) (D) (b) (h1) (d3) (r) (s) (h2) (f) (d4) (d2) (n) (bolt) (Kgs)
10 14.0 60 90 14 35 25 4 1.8 6 2 40 14 4 M12 0.59
17.2 60 90 14 35 28 4 1.8 6 2 40 14 4 M12 0.59
15 20.0 65 95 14 35 30 4 2 6 2 45 14 4 M12 0.65
21.3 65 95 14 35 32 4 2 6 2 45 14 4 M12 0.65
20 25.0 75 105 16 38 38 4 2.3 6 2 58 14 4 M12 0.95
26.9 75 105 16 38 40 4 2.3 6 2 58 14 4 M12 0.95
25 30.0 85 115 16 38 42 4 2.6 6 2 68 14 4 M12 1.14
33.7 85 115 16 38 45 4 2.6 6 2 68 14 4 M12 1.14
32 38.0 100 140 16 40 52 6 2.6 6 2 78 18 4 M16 1.69
42.4 100 140 16 40 56 6 2.6 6 2 78 18 4 M16 1.69
40 44.5 110 150 16 42 60 6 2.6 7 3 88 18 4 M16 1.86
48.3 110 150 16 42 64 6 2.6 7 3 88 18 4 M16 1.86
50 57.0 125 165 18 45 72 6 2.9 8 3 102 18 4 M16 2.53
60.3 125 165 18 45 75 6 2.9 8 3 102 18 4 M16 2.53
65 76.1 76.1 145 185 18 45 90 6 2.9 10 3 122 18 4 M16 3.08
80 88.9 88.9 160 200 20 50 105 8 3.2 10 3 138 18 8 M16 3.72
100 108.0 180 220 20 52 125 8 3.6 12 3 158 18 8 M16 4.71
114.3 180 220 20 52 131 8 3.6 12 3 158 18 8 M16 4.71
125 133.0 210 250 22 55 150 8 4 12 3 188 18 8 M16 6.4
139.5 210 250 22 55 156 8 4 12 3 188 18 8 M16 6.4
150 159.0 240 285 22 55 175 10 4.5 12 3 212 22 8 M20 7.8
168.3 240 285 22 55 184 10 4.5 12 3 212 22 8 M20 7.8
200 219.1 219.1 295 340 24 62 235 10 5.9 16 3 268 22 12 M20 11
250 267.0 355 405 26 70 285 12 6.3 16 3 320 26 12 M24 15.6
273.0 355 405 26 70 292 12 6.3 16 3 320 26 12 M24 15.6
300 323.9 323.9 410 460 28 78 344 12 7.1 16 4 378 26 12 M24 22.1
350 355.6 470 520 30 82 390 12 8 16 4 438 26 16 M24 31.3
368.0 470 520 30 82 390 12 8 16 4 438 26 16 M24 29.2
400 406.4 525 580 32 85 445 12 8 16 4 490 30 16 M27 39.5
419.0 525 580 32 85 445 12 8 16 4 490 30 16 M27 37.1
450 457.0 457.0 585 640 34 85 490 12 8 16 4 550 30 20 M27 44.3
500 508 508 650 715 34 90 548 12 8 16 4 610 33 20 M30 61.2
600 610 610 770 840 36 95 652 12 8.8 18 5 725 36 20 M33 75.4
700 711 711 840 910 36 100 755 12 8.8 18 5 795 36 24 M33 77.1
800 813 813 950 1025 38 105 855 12 10 20 5 900 39 24 M36 101
900 914 914 1050 1125 40 110 955 12 10 20 5 1000 39 28 M36 122
1000 1016 1016 1170 1255 42 120 1058 16 10 22 5 1115 42 28 M39 162
1200 1220 1220 1390 1485 48 130 1262 16 13 30 5 1330 48 32 M45 243
1400 1420 1420 1590 1685 52 145 1465 16 14 30 5 1530 48 36 M45 323
1600 1620 1620 1820 1930 58 160 1668 16 16 35 5 1750 56 40 M52 479
1800 1820 1820 2020 2130 62 170 1870 16 18 35 5 1950 56 44 M52 599
2000 2020 2020 2230 2345 66 180 2072 16 20 40 5 2150 62 48 M56 719

Flange DN65 PN16 DIN 2633 Sizes

Normal Pipe Size DN
1/2 15
3/4 20
1 25
1 1/4 32
1 1/2 40
2 50
2 1/2 65
3 80
4 100

DIN 2633 Long Weld Neck Flange Wall Thickness

Normal Size Pipe Outer Diameter 20 SCH 10 SCH 160 SCH 100 SCH 30 SCH 80 SCH STD Wall 120 SCH 40 SCH XX Hvy 60 SCH EXT Hvy 140 SCH
½ 0.84 ... 0.083 0.188 ... ... 0.147 0.109 ... 0.109 0.294 ... 0.147 ...
¾ 1.05 ... 0.083 0.219 ... ... 0.154 0.113 ... 0.113 0.308 ... 0.154 ...
1 1.315 ... 0.109 0.25 ... ... 0.179 0.133 ... 0.133 0.358 ... 0.179 ...
1 ¼ 1.66 ... 0.109 0.25 ... ... 0.191 0.14 ... 0.14 0.382 ... 0.191 ...
1 ½ 1.9 ... 0.109 0.281 ... ... 0.2 0.145 ... 0.145 0.4 ... 0.2 ...
2 2.375 ... 0.109 0.344 ... ... 0.218 0.154 ... 0.154 0.436 ... 0.218 ...
2 ½ 2.875 ... 0.12 0.375 ... ... 0.276 0.203 ... 0.203 0.552 ... 0.276 ...
3 3.5 - 0.12 0.438 - - 0.3 0.216 - 0.216 0.6 - 0.3 -
3 ½ 4 - 0.12 - - - 0.318 0.226 - 0.226 0.636 - 0.318 -
4 4.5 - 0.12 0.531 - - 0.337 0.237 0.438 0.237 0.674 - 0.337 -
5 5.563 - 0.134 0.625 - - 0.375 0.258 0.5 0.258 0.75 - 0.375 -
6 6.625 - 0.134 0.719 - - 0.432 0.28 0.562 0.28 0.864 - 0.432 -
8 8.625 0.25 0.148 0.906 0.594 0.277 0.5 0.322 0.719 0.322 0.875 0.406 0.5 0.812
10 10.75 0.25 0.165 1.125 0.719 0.307 0.594 0.365 0.844 0.365 1 0.5 0.5 1
12 12.75 0.25 0.18 1.312 0.844 0.33 0.688 0.375 1 0.406 1 0.562 0.5 1.125
14 14 0.312 0.25 1.406 0.938 0.375 0.75 0.375 1.094 0.438 - 0.594 0.5 1.25
16 16 0.312 0.25 1.594 1.031 0.375 0.844 0.375 1.219 0.5 - 0.656 0.5 1.438
18 18 0.312 0.25 1.781 1.156 0.438 0.938 0.375 1.375 0.562 - 0.75 0.5 1.562
20 20 0.375 0.25 1.969 1.281 0.5 1.031 0.375 1.5 0.594 - 0.812 0.5 1.75
22 22 - 0.25 - - - - 0.375 - - - - 0.5 -
24 24 0.375 0.25 2.344 1.531 0.562 1.219 0.375 1.812 0.688 - 0.969 0.5 2.062
26 26 - - - - - - 0.375 - - - - 0.5 -
30 30 0.5 0.312 - - 0.625 - 0.375 - - - - 0.5 -

DIN 2633 PN6 Dimensions

DIN 2633 PN6 Dimensions

If you searching a supplier from these places check our supplies below

CC Energy Development S.A.L Oman

CC Energy Development S.A.L Oman

Qatar Petroleum Oil Refinery, Mesaieed, Qatar

Qatar Petroleum Oil Refinery, Mesaieed, Qatar

Pacific Oil & Gas -Singapore

Pacific Oil & Gas -Singapore