ASTM A694 F70 Flanges

ASTM A694 F70 Flanges

Leading SA 694 F70 Blind Flange manufacturer in India, Check Dimensions and Pressure Rating of High Yield CS F70 Slip on Flanges

The steel used in the manufacture of the Carbon Steel F70 Plate Flange should be completely deoxidized and any one of the following smelting processes needs to be adopted by the flanges produced under the ASTM A694 specification i.e open furnace, electric furnace or oxygen top-blown converter. The analysis of the smelting process must also be performed as mentioned in the ASTM A694 specification. Further, these forged carbon steel or low alloyed steel specified ASTM A694 F70 Flanges needs to be free of the detrimental defects.

ASTM A694 F70 Steel Flanges Stockists, Before Buy Check SA 694 F70 Orifice Flanges Price List

Chemical heat analysis of the steel grades of the SA 694 F70 Flange is required to be performed under this ASTM specification and the steel grade needs to in addition, also conform to specified chemical composition requirements. Besides this, the testing and tensile property requirements of the Materials must adhere to the specification as well. After conducting a heat treatment and mechanical profiling High Yield Carbon Steel F70 offers an increase in tensile strength, which means that they have the ability to withstand higher stresses. Generally, most Steel alloys very often show a decrease in mechanical properties after operations like quenching and tempering. However, in the case of high yield steel-based, ASTM A694 Gr F70 Pipe Flange are regularly suited for heat treatment as well as bending without any substantial drop in the yield behaviour of the A694 F70 material

Check ASTM A694 Gr F70 Forged Flanges Size, Dimensions, Pressure Rating, Purchase SA694 Gr F70 SORF Flange at lowest price from Supplier in Mumbai, india

ASTM A694 F70 Flanges

ASTM A694 F70 Flanges


SA 694 F70 Blind Flange

SA 694 F70 Blind Flange


High Yield CS F70 Slip on Flanges

High Yield CS F70 Slip on Flanges



SA694 Gr F70 SORF Flange Specifications

Manufacturer of ASTM A694 F70 Flanges
ANSI Pressure Class 300LBS, 150LBS, 600LBS, 1500LBS, 900LBS, 2500LBS, SA 694 F70 Blind Flange
Meets Standards GOST 12821-80, SABS 1123, GOST 33259, ASME, API, UNI, API, EN, ASTM, BS, ISO, SP, ANSI, MSS, JIS, DIN, CS F70 Slip on Flanges
The most common types of ASTM A694 F70 Flanges we manufacture
  • ASME SA 694 F70 Socket Weld Flange
  • SA 694 F70 Blind Flange
  • A694 Carbon Steel Gr F70 Slip On Flange
  • ASTM A694 Gr F70 Reducing Flange
  • F70 Carbon Steel Weld Neck Flange
  • High Yield Carbon Steel F70 Lap Joint Flange
  • A694 CS Gr F70 Expander Flange
  • Steel Grade F70 Threaded Flange
Manufacturer Pressure Classes
  • 20" ASME SA 694 F70 Flange for Class 300 lb
  • 20" SA 694 F70 Flange for Class 600 lb
  • 10" A694 Carbon Steel Gr F70 Flange for Class 1500 lb
  • 24" ASTM A694 Gr F70 Flange for Class 150 lb
  • 8" F70 Carbon Steel Flange for Class 2500 lb
  • 16" High Yield Carbon Steel F70 Flange for Class 900 lb
EN 1092-1/ EN 1092-2 SA 694 F70 flange standard
6Bar, 10Bar, 25Bar, 40Bar, 16Bar, ASTM A694 F70 Steel Flanges
BS Standards BS10, BS4504, BS4504, BS1560, ASTM A694 Gr F70 Forged Flanges
Japanese Industrial Standards - JIS B2220 5K, 20K, 16K, 40K, 63K, 30K, 10K, SA694 Gr F70 SORF Flange
DIN Standards DIN 2627, DIN 2573, DIN 2527, DIN 2576, DIN 2655, DIN 2638, DIN 2628, DIN 2641, DIN 2629, DIN 2635, DIN 2633, DIN 2502, DIN 2628, DIN 2637, DIN 2565, DIN 2642, DIN 2636, DIN 2573, DIN 2636, DIN 2656, DIN 2635, DIN 2638, DIN 2630, DIN 2631, DIN 2634, 2631, DIN 2527, DIN 2637, DIN 2634, DIN 2503, DIN 2576, DIN 2632, DIN 2673, DIN 2566, DIN 2566, DIN 2633, High Yield Carbon Steel F70 RTJ Flanges
Wall Thickness Sch140, STD, Sch80, Sch100, Sch60, Sch120, Sch30, Sch10, Sch40, EXT-Hvy, Sch60, XX-Hvy, Sch20, A694 CS Gr F70 Socket Weld Flanges
Types Plate, Threaded, Forged, Welded, Screwed, A694 F70 Weld Neck Flanges
Most common ASME SA 694 F70 flange processes followed by manufacturers
  • Casting
  • Cutting
  • Closed die forging
  • Open die forging
  • Roll forging
We also supply
  • Ring Joint Gasket
  • Sealing Gaskets
  • Flange Bolts as Required
Flange faces
  • Raised (RF)
  • Tongue and groove (T&G)
  • Lap joint
  • Flat (FF)
  • Male and female (M&F)
  • Ring joint (RTJ)
ASTM A694 F70 Flanges Standard
  • ASME B16.47 Series B & A
  • GOST
  • ASME B16.48
  • ASME B16.5 (Most popular)
  • BS4504
DIN Standards
  • DIN 2633
  • DIN 2501
  • DIN 2642
  • DIN 2627
  • DIN 2543
  • DIN 2635
  • DIN 2527
PN Rating PN16, PN40, PN6, PN25, PN10, PN64, SA 694 F70 Blind Flanges
Quality Inspection
  • 100% Radiography Test Report for any Cracks or any incomplete penetration
  • Raw Materials Certificate
  • EN 10204/3.1B MTC
  • Third Party Inspection Report
Value Added Services
  • Large Diameter ASTM A694 F70 Flanges
  • CNC Machining
  • Customised ASTM A694 F70 Flanges

SA 694 F70 Blind Flange Price in India

Description Price in US $ Price in INR Recent supply location
ASTM A694 F70 4300LB S-10S RF WN FLANGE US $ 483.94 per kg INR 36,940 per Kg United Kingdom
BLIND FLANGE ASTM A 694 GR F70 3 X 1/2 NPTF US $ 111.57 per kg INR 8,516 per Kg Qatar
ASTM A694 GR F70 FLANGE, CLASS150, 6, BLIND, RF, ASME B16.5 US $ 50.46 per kg INR 3,853 per Kg Qatar
ASTM A694M F70 CARBON STEEL FLANGE, 1500 RTJ SCH 160 , SOCKETWELD 1-900 US $ 56.33 per kg INR 4,300 per Kg Japan
ASTM A694 GR F70 inch 1 300LB SW RF FLANGE US $ 66.19 per kg INR 5,052 per Kg United Kingdom

Different types of ASTM A694 F70 Bind Flanges

ASTM A694 F70 Blind Flange

ASTM A694 F70 Blind Flange

600# 8 Inch RF SA694 Gr F70 Blind flange

600# 8 Inch RF SA694 Gr F70 Blind flange

20 Inch Class 150 F70 Carbon Steel Spectacle Blind Flange

20 Inch Class 150 F70 Carbon Steel Spectacle Blind Flange

2500# 10 Inch ANSI B16.5 ASME SA 694 F70 RTJ Blind Flange

2500# 10 Inch ANSI B16.5 ASME SA 694 F70 RTJ Blind Flange

DN 100 PN 50 RF A694 Gr F70 Blind Flange

DN 100 PN 50 RF A694 Gr F70 Blind Flange

2 Inch Class 600 RF A694 F70 Blind Flange

2 Inch Class 600 RF A694 F70 Blind Flange


ASME SA 694 F70 Weld Neck Flange types

10IN CL300 SCH STD ASME B16.5 A694 F70 WN Flange

10IN CL300 SCH STD ASME B16.5 A694 F70 WN Flange

ASTM A694 F70 Weld Neck Flange

ASTM A694 F70 Weld Neck Flange

ASME B16.5 SCH 40 300# 6 Inch A694 Gr F70 WN RF Flange

ASME B16.5 SCH 40 300# 6 Inch A694 Gr F70 WN RF Flange

PN16 DN80 A694 Gr F70 WN Flange

PN16 DN80 A694 Gr F70 WN Flange

Class 150 LB SCH 40 ASTM A694 F70 WN Flange

Class 150 LB SCH 40 ASTM A694 F70 WN Flange

30 Inch Class 600 LB RF A694 F70 Weld Neck Flange

30 Inch Class 600 LB RF A694 F70 Weld Neck Flange


ASTM A694 F70 Carbon Steel Socket Weld Flange types

Class 150 2 Inch SCH 40 SA 694 F70 SW Flanges

Class 150 2 Inch SCH 40 SA 694 F70 SW Flanges

ASTM A694 F70 Socket Wled FLange

ASTM A694 F70 Socket Wled FLange

ANSI B16.5 300# 3 Inch A694 F70 Steel RF SW Flanges

ANSI B16.5 300# 3 Inch A694 F70 Steel RF SW Flanges

150# Astm F70 Socket Weld Flange

150# Astm F70 Socket Weld Flange

2 1/2 Inch 150# SA694 Gr F70 Socket Weld Flange

2 1/2 Inch 150# SA694 Gr F70 Socket Weld Flange

Class 300 1 Inch ASTM A694 F70 SW Flange

Class 300 1 Inch ASTM A694 F70 SW Flange


Types of A694 Grade F70 Slip-On Flanges

OD 2876.55*ID 2514.6 MM A694 Gr F70 Weldable Slip-on Flange

OD 2876.55*ID 2514.6 MM A694 Gr F70 Weldable Slip-on Flange

ASTM A694 F70 Slip-On FLange

ASTM A694 F70 Slip-On FLange

40 Inch 150 LB ASTM A694 F70 Slip-on Flange

40 Inch 150 LB ASTM A694 F70 Slip-on Flange

ASME B16.5 2 Inch 150 LB SA 694 F70 SO Flange

ASME B16.5 2 Inch 150 LB SA 694 F70 SO Flange

ASME B16.5, 8 Inch 600 LB Material A694 SORF Flanges

ASME B16.5, 8 Inch 600 LB Material A694 SORF Flanges

150# 36 Inch SA694 Gr F70 Slip On Flange

150# 36 Inch SA694 Gr F70 Slip On Flange


Types Grade F70 Carbon Steel Lap Joint Flanges

ASME B16.5 300LB SA694 Gr F70 Lap Joint Flanges

ASME B16.5 300LB SA694 Gr F70 Lap Joint Flanges

ASTM A694 F70 Lap Joint Flanges

ASTM A694 F70 Lap Joint Flanges

1/2 Inch ASTM A694 F70 Lap Joint Flange

1/2 Inch ASTM A694 F70 Lap Joint Flange

150 LB A694 F70 Lapped Joint Flange

150 LB A694 F70 Lapped Joint Flange

1 Inch ANSI B16.5 SA 694 F70 Stub End Lap Joint Flanges

1 Inch ANSI B16.5 SA 694 F70 Stub End Lap Joint Flanges

3 Inch DN80 F70 Lapped Joint Flange

3 Inch DN80 F70 Lapped Joint Flange


Types of Carbon Steel F70 Threaded Flanges

3 Inch Class 300 ASTM A694 Hot Dipped Galvanized Thread Flanges

3 Inch Class 300 ASTM A694 Hot Dipped Galvanized Thread Flanges

ASTM A694 F70 Threaded Flanges

ASTM A694 F70 Threaded Flanges

64 inches ASTM A694 Gr F70 Threaded Flange

64 inches ASTM A694 Gr F70 Threaded Flange

ANSI B16.5 4 Inch F70 Steel Screw Thread Flanges

ANSI B16.5 4 Inch F70 Steel Screw Thread Flanges

DN50 2 inch A694 F70 Thread Flanges

DN50 2 inch A694 F70 Thread Flanges

1/2 Inch ASTM A694 F70 Threaded Flange

1/2 Inch ASTM A694 F70 Threaded Flange


Types of A694 CS Gr F70 Forged Flanges

8 Inch F70 Forged Plate flange

8 Inch F70 Forged Plate flange

ASTM A694 F70 Forged Flanges

ASTM A694 F70 Forged Flanges

1 Inch F70 Forged Flange

1 Inch F70 Forged Flange

3 Inch F70 Forged Steel Flat Flange

3 Inch F70 Forged Steel Flat Flange

150 LB F70 Forged orifice Flange

150 LB F70 Forged orifice Flange

2 Inch x NPTF 1-1/2 Inch F70 Forged RTJ Flanges

2 Inch x NPTF 1-1/2 Inch F70 Forged RTJ Flanges


A694 CS Gr F70 Socket Weld Flanges Testing

  • UI trasonic flaw detector
  • Magnetic particle detector
  • Direct-reading Spectrograph
  • X-ray detector
  • Hydrostatic testing machine
testing

ASTM A694 Gr F70 Forged Flanges Pressure Rating

°C Temperature
2500 Class 150 Class 400 Class 300 Class 600 Class 1500 Class 900 Class
-29 upto 38 425.5 19.6 68.1 51.1 102.1 255.3 153.2
50 417.7 19.2 66.8 50.1 100.2 250.6 150.4
100 388.3 17.7 62.1 46.6 93.2 233 139.8
150 375.6 15.8 60.1 45.1 90.2 225.4 135.2
200 365 13.8 58.4 43.8 87.6 219 131.4
250 349.5 12.1 55.9 41.9 83.9 209.7 125.8
300 331.8 10.2 53.1 39.8 79.6 199.1 119.5
325 322.6 9.3 51.6 38.7 77.4 193.6 116.1
350 313 8.4 50.1 37.6 75.1 187.8 112.7
375 303.1 7.4 48.5 36.4 72.7 181.8 109.1
400 289.3 6.5 46.3 34.7 69.4 173.6 104.2
425 239.7 5.5 38.4 28.8 57.5 143.8 86.3
450 191.7 4.6 30.7 23 46 115 69
475 145.3 3.7 23.2 17.4 34.9 87.2 52.3
500 97.9 2.8 15.7 11.8 23.5 58.8 35.3
538 49.2 1.4 7.9 5.9 11.8 29.5 17.7
TEMP
°C
2500 150 400 300 600 1500 900

We can help with all High Yield Carbon Steel F70 RTJ Flanges supply needs. offer Genuine price of A694 CS Gr F70 Socket Weld Flanges in ASME B16.5 Standard

SA 694 F70 Blind Flanges Dimensions

Pipe for Nominal Size Flanges Inside Diam.
Flanges Outside Diam. (inch)
300 Class 150 Class 600 Class 400 Class 900 Class
1/2 inches 0.84 inches 2.125 1.875 2.125 2.125 2.50
3/4 inches 1.06 inches 2.625 2.25 2.625 2.625 2.75
1 inches 1.31 inches 2.875 2.625 2.875 2.875 3.125
1 1/4 inches 1.66 inches 3.25 3 3.25 3.25 3.50
1 1/2 inches 1.91 inches 3.75 3.375 3.75 3.75 3.875
2 inches 2.38 inches 4.375 4.125 4.375 4.375 5.625
2 1/2 inches 2.88 inches 5.125 4.875 5.125 5.125 6.50
3 inches 3.50 inches 5.875 5.375 5.875 5.875 6.625
4 inches 4.50 inches 7.125 6.875 7.625 7.00 8.125
5 inches 5.56 inches 8.50 7.75 9.50 8.375 9.75
6 inches 6.62 inches 9.875 8.75 10.50 9.75 11.375
8 inches 8.62 inches 12.125 11 12.625 12.00 14.125
10 inches 10.75 inches 14.25 13.375 15.75 14.125 17.125
12 inches 12.75 inches 16.625 16.125 18.00 16.50 19.625

High Yield Carbon Steel F70 RTJ Flanges Weight Chart

High Yield Carbon Steel F70 RTJ Flanges Weight Chart

A694 F70 Weld Neck Flanges for Sale

6 inch, SCH 120, Carbon Steel F70 Ring Type Joint Flange 3 inch, SCH 80, Class 900, A694 F70 Threaded Flange
4 inch, SCH 40, Class 150, PN25, ASME SA 694 F70 Long Weld Neck Flange 3 inch, 600#, RF, Carbon Steel A694 F70 Forged Flange
3 inch, SCH 120, 900#, High Yield CS A694 Gr F70 Plate Flange 18 inch, Class 600, SA 694 F70 Male and Female Flange
1 inch. 1500LB, ASTM A694 F70 Blind Flange 4 inch, Class 300, High Yield CS A694 Gr F70 Weld Neck Flange
4 inch, Schedule 5, RF 300LB, ASTM A694 Grade F70 Lap Joint Flange 3/4 inch, 150#, ASTM A694 Gr F70 Slip On Flange
1-1/2 inch, Class 150, FF, A694 CS Gr F70 Reducing Flange 2 inch, SCH 80, 600#, F70 Carbon Steel Tongue & Groove Flange
3 inch, 125#, Schedule 5, Steel Grade F70 Spectacle Blind Flange 8 inch, 300#, Flate Face, F70 Carbon Steel Raised Face Flange
1 inch, 1500#, Schedule 160, Carbon Steel F70 Socket Weld Flange 12 inch, 1500#, SCH 120, ASTM A694 Grade F70 Bleed Ring

CS F70 Slip on Flanges Chemical Composition

Mn C P Si S
1.60-1.64 0.26-0.265 0.025-0.030 0.15-0.35 0.025-0.030

Buy directly from manufacturer of A694 F70 Weld Neck Flanges online and save cost, check SA 694 F70 Blind Flanges Specification

ASTM A694 F70 Steel Flanges Mechanical Properties

Yield Properties Tensile Properties Elongational
450 415 20 %

ASTM A694 F70 Flanges Application

  • Boiler & Heat Exchangers
  • Paper & Pulp Companies
  • Oil and Gas Industry
  • Chemical Refinery
  • Pipeline
  • High Pressure Applications
  • High Temperature Application
  • Nuclear Power Plants
  • Water Pipe Line
  • Food Processing and Dairy Industries

Do you belong to following locations Please see what we supply here

Ruwais Refinery Complex - Third Grassroot Refinery United Arab Emirates

Ruwais Refinery Complex - Third Grassroot Refinery United Arab Emirates

Aspen Sa Manufacturing Operations (Pty) Ltd-EasternCape, EasternCape, South Africa

Aspen Sa Manufacturing Operations (Pty) Ltd-EasternCape, EasternCape, South Africa

Al Zour Refinery- Kuwait

Al Zour Refinery- Kuwait


Glaxosmithkline South Africa (Pty) Ltd Bryanston, Gauteng, South Africa

Glaxosmithkline South Africa (Pty) Ltd Bryanston, Gauteng, South Africa

Hormoz New Oil Refinery- Iran

Hormoz New Oil Refinery- Iran

Neopharma Pharmaceutical Plant, Abu Dhabi

Neopharma Pharmaceutical Plant, Abu Dhabi