ASTM A182 F22 Flanges

ASTM A182 F22 Flanges

Are you looking for ASME SA182 F22 Blind Flange Manufacturer in India, Supplier and Stockist of Alloy Steel F22 Slip on Flange

Designed specifically for high temperature service application, these ASTM A182 F22 Flanges are used in processing industries. For instance, industries such as food and beverage, pulp and paper, chemical factories as well as in the fabrication industry and power plant our clients prefer using these alloy steel flanges. A reason for using these Alloy Steel F22 Flanges is that as an alloy, they tend to offer far superior properties as in comparison to the conventionally used plain carbon steel flanges. While carbon steels offer some amount of toughness with little or no resistance to corrosion, alloy steel grade Alloy Steel F22 Flanges exhibit many traits such as enhanced resistance to corrosion, increased tensile strength, and higher tolerance to elevated temperatures while demonstrating excellent performance. Although the flange produced from alloy steel SA182 F22 Material is expensive as compared to carbon steels, they are less expensive when compared to some grades of stainless steel.

Buy SA 182 Gr F22 Weld Neck Flange from trusted manufacturers, An ISO certified supplier of SA182 F22 Material

The inside diameter of the SA 182 Gr F22 SORF Flange is produced in such a manner that it is slightly bigger than the pipe's outside diameter. SORF or slip on raised flange are referred to as attachments that can be slipped over a pipe. The SORF ASTM a182 f22 class 2 flanges can be connected to the pipe through a fillet weld at both top as well as bottom of the flange.

The main purpose of the SORF A182 F22 Flanges is to distillate more heaviness on a smaller gasket area & upsurge the pressure repression competence of the joint.

We supply hydro-tested A182 F22 Steel Weld Neck Flanges, check ASTM A182 F22 Class 3 Lap Joint Flange pressure rating

ASTM A182 F22 Flanges

ASTM A182 F22 Flanges


ASME SA182 F22 Blind Flange

ASME SA182 F22 Blind Flange

Alloy Steel F22 Slip on Flange

Alloy Steel F22 Slip on Flange


ASME SA182 F22 Blind Flange Specifications

Manufacturer of ASTM A182 F22 Flanges
ANSI Pressure Class 150LBS, 900LBS, 600LBS, 300LBS, 1500LBS, 2500LBS, ASME SA182 F22 Blind Flange
Meets Standards SABS 1123, GOST 12821-80, GOST 33259, DIN, API, BS, API, ISO, JIS, SP, MSS, EN, ASTM, ASME, ANSI, UNI, Alloy Steel F22 Slip on Flange
The most common types of ASTM A182 F22 Flanges we manufacture
  • ASTM A182 F22 Class 3 Blind Flange
  • ASTM A182 Grade F22 Class 3 Socket Weld Flange
  • ASTM A182 F22 Cl3 Reducing Flange
  • ASTM A182 Grade F22 Slip On Flange
  • ASME SA182 F22 Class 3 Lap Joint Flange
  • SA182 F22 Cl3 Weld Neck Flange
  • ASTM A182 F22 Class 2 Threaded Flange
  • SA-182 F22 Expander Flange
Manufacturer Pressure Classes
  • 20" ASTM A182 F22 Class 3 Flange for Class 600 lb
  • 20" ASTM A182 Grade F22 Class 3 Flange for Class 300 lb
  • 24" ASTM A182 F22 Cl3 Flange for Class 150 lb
  • 10" ASTM A182 Grade F22 Flange for Class 1500 lb
  • 16" ASME SA182 F22 Class 3 Flange for Class 900 lb
  • 8" SA182 F22 Cl3 Flange for Class 2500 lb
EN 1092-1/ EN 1092-2 ASTM A182 F22 Class 3 flange standard
6Bar, 40Bar, 10Bar, 16Bar, 25Bar, SA 182 Gr F22 Weld Neck Flange
BS Standards BS1560, BS4504, BS10, BS4504, SA182 F22 Material
Japanese Industrial Standards - JIS B2220 20K, 40K, 16K, 10K, 63K, 30K, 5K, A182 F22 Steel Weld Neck Flanges
DIN Standards DIN 2634, DIN 2632, DIN 2527, DIN 2631, DIN 2566, DIN 2638, DIN 2637, 2631, DIN 2503, DIN 2573, DIN 2629, DIN 2655, DIN 2642, DIN 2573, DIN 2635, DIN 2627, DIN 2633, DIN 2630, DIN 2636, DIN 2673, DIN 2576, DIN 2633, DIN 2566, DIN 2634, DIN 2628, DIN 2635, DIN 2656, DIN 2637, DIN 2527, DIN 2641, DIN 2502, DIN 2565, DIN 2638, DIN 2576, DIN 2636, DIN 2628 ASTM A182 F22 Class 3 Lap Joint Flange
Wall Thickness Sch120, Sch80, STD, Sch40, Sch60, Sch30, Sch60, Sch20, Sch10, Sch100, Sch140, XX-Hvy, EXT-Hvy, SA 182 F22 CL3 Socket Weld Flange
Types Forged, Plate, Welded, Threaded, Screwed, Alloy Steel F22 Threaded Flanges
Most common ASTM A182 Grade F22 Class 3 flange processes followed by manufacturers
  • Cutting
  • Casting
  • Open die forging
  • Closed die forging
  • Roll forging
We also supply
  • Sealing Gaskets
  • Ring Joint Gasket
  • Flange Bolts as Required
Flange faces
  • Flat (FF)
  • Ring joint (RTJ)
  • Raised (RF)
  • Lap joint
  • Tongue and groove (T&G)
  • Male and female (M&F)
ASTM A182 F22 Flanges Standard
  • ASME B16.5 (Most popular)
  • ASME B16.47 Series B & A
  • ASME B16.48
  • GOST
  • BS4504
DIN Standards
  • DIN 2501
  • DIN 2633
  • DIN 2627
  • DIN 2642
  • DIN 2635
  • DIN 2543
  • DIN 2527
PN Rating PN64, PN6, PN10, PN16, PN25, PN40, A182 F22 CL3 Blind Flange
Quality Inspection
  • EN 10204/3.1B MTC
  • 100% Radiography Test Report for any Cracks or any incomplete penetration
  • Raw Materials Certificate
  • Third Party Inspection Report
Value Added Services
  • CNC Machining
  • Large Diameter ASTM A182 F22 Flanges
  • Customised ASTM A182 F22 Flanges

Alloy Steel F22 Slip on Flange Price in India

Description Price in US $ Price in INR Recent supply location
ASTM A182 GR.F22 Class 2 BLIND FLANGE-DN15XCL150 US $ 4.55 per kg INR 347 per Kg China
ASTM A182 F22 CL 2 inch 2 4300LB S-10S RF WN FLANGE US $ 483.94 per kg INR 36,940 per Kg United Kingdom
A182 F22 MOC ASTM A694 F22 CL 2 ASME B16.5 REDUCING WNRT J FLANGE 2X1 SCH 12.7 2500# US $ 102.70 per kg INR 7,839 per Kg United Kingdom
ASTM A 182 GR F22 Class 2 BLIND FLANGE 3 X 1/2 NPTF US $ 111.57 per kg INR 8,516 per Kg Qatar
ASTM A182 GR. F22, CL 2 RF, REDU WN FLANGE, 3x1-1/2 S-40S, CL900, ASME- B16.5 US $ 87.20 per kg INR 6,656 per Kg Saudi Arabia

Different types of ASTM A182 F22 Class 3 Blind Flanges

600# 8 Inch RF SA182 Gr F22 CL2 Blind flange

600# 8 Inch RF SA182 Gr F22 CL2 Blind flange

ASTM A182 F22 Blind Flange

ASTM A182 F22 Blind Flange

2500# 10 Inch ANSI B16.5 ASME SA 182 F22 Class 3 RTJ Blind Flange

2500# 10 Inch ANSI B16.5 ASME SA 182 F22 Class 3 RTJ Blind Flange

DN 100 PN 50 RF A182 Gr F22 Cl3 Blind Flange

DN 100 PN 50 RF A182 Gr F22 Cl3 Blind Flange

20 Inch Class 150 F22 Carbon Steel Spectacle Blind Flange

20 Inch Class 150 F22 Carbon Steel Spectacle Blind Flange

2 Inch Class 600 RF A182 F22 Class 3 Blind Flange

2 Inch Class 600 RF A182 F22 Class 3 Blind Flange


ASTM A182 F22 Cl3 Weld Neck Flange types

PN16 DN80 A182 Gr F22 WN Flange

PN16 DN80 A182 Gr F22 WN Flange

ASTM A182 F22 Weld Neck Flange

ASTM A182 F22 Weld Neck Flange

30 Inch Class 600 LB RF A182 F22 Weld Neck Flange

30 Inch Class 600 LB RF A182 F22 Weld Neck Flange

10IN CL300 SCH STD ASME B16.5 A182 F22 Cl1 WN Flange

10IN CL300 SCH STD ASME B16.5 A182 F22 Cl1 WN Flange

Class 150 LB SCH 40 ASTM A182 F22 WN Flange

Class 150 LB SCH 40 ASTM A182 F22 WN Flange

ASME B16.5 SCH 40 300# 6 Inch A182 Gr F22 Cl3 WN RF Flange

ASME B16.5 SCH 40 300# 6 Inch A182 Gr F22 Cl3 WN RF Flange


ASTM A182 Grade F22 Socket Weld Flange types

Class 150 2 Inch SCH 40 SA 182 F22 Class 3 SW Flanges

Class 150 2 Inch SCH 40 SA 182 F22 Class 3 SW Flanges

ASTM A182 F22 Socket Wled FLange

ASTM A182 F22 Socket Wled FLange

2 1/2 Inch 150# SA182 Gr F22 Socket Weld Flange

2 1/2 Inch 150# SA182 Gr F22 Socket Weld Flange

150# Astm F22 Socket Weld Flange

150# Astm F22 Socket Weld Flange

Class 300 1 Inch ASTM A182 F22 Cl3 SW Flange

Class 300 1 Inch ASTM A182 F22 Cl3 SW Flange

ANSI B16.5 300# 3 Inch A182 F22 Steel RF SW Flanges

ANSI B16.5 300# 3 Inch A182 F22 Steel RF SW Flanges


Types of ASTM A182 F22 Class 2 Slip-On Flanges

ASME B16.5, 8 Inch 600 LB Material A182 SORF Flanges

ASME B16.5, 8 Inch 600 LB Material A182 SORF Flanges

ASTM A182 F22 Slip-On FLange

ASTM A182 F22 Slip-On FLange

ASME B16.5 2 Inch 150 LB SA 182 F22 SO Flange

ASME B16.5 2 Inch 150 LB SA 182 F22 SO Flange

40 Inch 150 LB ASTM A182 F22 Slip-on Flange

40 Inch 150 LB ASTM A182 F22 Slip-on Flange

OD 2876.55*ID 2514.6 MM A182 Gr F22 Weldable Slip-on Flange

OD 2876.55*ID 2514.6 MM A182 Gr F22 Weldable Slip-on Flange

150# 36 Inch SA182 Gr F22 CL3 Slip On Flange

150# 36 Inch SA182 Gr F22 CL3 Slip On Flange


Types ASTM A182 Grade F22 Class 3 Lap Joint Flanges

1 Inch ANSI B16.5 SA 182 F22 Cl2 Stub End Lap Joint Flanges

1 Inch ANSI B16.5 SA 182 F22 Cl2 Stub End Lap Joint Flanges

ASTM A182 F22 Lap Joint Flanges

ASTM A182 F22 Lap Joint Flanges

150 LB A182 F22 Cl3 Lapped Joint Flange

150 LB A182 F22 Cl3 Lapped Joint Flange

3 Inch DN80 F22 Class 3 Lapped Joint Flange

3 Inch DN80 F22 Class 3 Lapped Joint Flange

1/2 Inch ASTM A182 F22 Class 1 Lap Joint Flange

1/2 Inch ASTM A182 F22 Class 1 Lap Joint Flange

ASME B16.5 300LB SA182 Gr F22 CL1 Lap Joint Flanges

ASME B16.5 300LB SA182 Gr F22 CL1 Lap Joint Flanges


Types of ASME SA182 F22 Class 3 Threaded Flanges

64 inches ASTM A182 Gr F22 Threaded Flange

64 inches ASTM A182 Gr F22 Threaded Flange

ASTM A182 F22 Threaded Flanges

ASTM A182 F22 Threaded Flanges

DN50 2 inch A182 F22 Class 3 Thread Flanges

DN50 2 inch A182 F22 Class 3 Thread Flanges

3 Inch Class 300 ASTM A182 Hot Dipped Galvanized Thread Flanges

3 Inch Class 300 ASTM A182 Hot Dipped Galvanized Thread Flanges

1/2 Inch ASTM A182 F22 Threaded Flange

1/2 Inch ASTM A182 F22 Threaded Flange

ANSI B16.5 4 Inch F22 Steel Screw Thread Flanges

ANSI B16.5 4 Inch F22 Steel Screw Thread Flanges


Types of SA-182 F22 Forged Flanges

1 Inch F22 Forged Flange

1 Inch F22 Forged Flange

ASTM A182 F22 Forged Flanges

ASTM A182 F22 Forged Flanges

2 Inch x NPTF 1-1/2 Inch F22 Forged RTJ Flanges

2 Inch x NPTF 1-1/2 Inch F22 Forged RTJ Flanges

3 Inch F22 Forged Steel Flat Flange

3 Inch F22 Forged Steel Flat Flange

150 LB F22 Forged orifice Flange

150 LB F22 Forged orifice Flange

8 Inch F22 Forged Plate flange

8 Inch F22 Forged Plate flange


SA 182 Gr F22 Weld Neck Flange Application

  • Food Processing & Dairy
  • Refineries
  • Off-Shore Oil Drilling Companies
  • Oil and Gas Industry
  • Pulp & Paper Industry
  • Pharmaceutical Equipment
  • Specialty Chemicals
  • Power Generation
  • Gas Processing
  • Sea Water Equipment
  • Heat Exchangers
  • Chemical Equipment
  • Pharmaceuticals
  • Condensers
  • Petrochemicals
Application

SA182 F22 Material Pressure Rating

°C Temp.
2500 Class 150 Class 400 Class 300 Class 600 Class 1500 Class 900 Class
-29 upto 38 425.5 19.6 68.1 51.1 102.1 255.3 153.2
50 417.7 19.2 66.8 50.1 100.2 250.6 150.4
100 388.3 17.7 62.1 46.6 93.2 233 139.8
150 375.6 15.8 60.1 45.1 90.2 225.4 135.2
200 365 13.8 58.4 43.8 87.6 219 131.4
250 349.5 12.1 55.9 41.9 83.9 209.7 125.8
300 331.8 10.2 53.1 39.8 79.6 199.1 119.5
325 322.6 9.3 51.6 38.7 77.4 193.6 116.1
350 313 8.4 50.1 37.6 75.1 187.8 112.7
375 303.1 7.4 48.5 36.4 72.7 181.8 109.1
400 289.3 6.5 46.3 34.7 69.4 173.6 104.2
425 239.7 5.5 38.4 28.8 57.5 143.8 86.3
450 191.7 4.6 30.7 23 46 115 69
475 145.3 3.7 23.2 17.4 34.9 87.2 52.3
500 97.9 2.8 15.7 11.8 23.5 58.8 35.3
538 49.2 1.4 7.9 5.9 11.8 29.5 17.7
TEMP
°C
2500 150 400 300 600 1500 900

Supplier and Manufacturer of SA 182 F22 CL3 Socket Weld Flange, we accept small/ large orders of Alloy Steel F22 Threaded Flanges

A182 F22 Steel Weld Neck Flanges Dimensions

Pipe for Nominal Size Flanges Inside Diam.
Flanges Outside Diam. (inch)
300 Class 150 Class 600 Class 400 Class 900 Class
1/2 inches 0.84 inches 2.125 1.875 2.125 2.125 2.50
3/4 inches 1.06 inches 2.625 2.25 2.625 2.625 2.75
1 inches 1.31 inches 2.875 2.625 2.875 2.875 3.125
1 1/4 inches 1.66 inches 3.25 3 3.25 3.25 3.50
1 1/2 inches 1.91 inches 3.75 3.375 3.75 3.75 3.875
2 inches 2.38 inches 4.375 4.125 4.375 4.375 5.625
2 1/2 inches 2.88 inches 5.125 4.875 5.125 5.125 6.50
3 inches 3.50 inches 5.875 5.375 5.875 5.875 6.625
4 inches 4.50 inches 7.125 6.875 7.625 7.00 8.125
5 inches 5.56 inches 8.50 7.75 9.50 8.375 9.75
6 inches 6.62 inches 9.875 8.75 10.50 9.75 11.375
8 inches 8.62 inches 12.125 11 12.625 12.00 14.125
10 inches 10.75 inches 14.25 13.375 15.75 14.125 17.125
12 inches 12.75 inches 16.625 16.125 18.00 16.50 19.625

ASTM A182 F22 Class 3 Lap Joint Flange Wall Thickness

Wall Thickness
Outside Daim. NPS SCH 40 SCH 20 XX Hvy SCH 10 SCH 140 SCH 100 SCH 60 EXT Hvy SCH 80 SCH 120 SCH 30 SCH 160 STD Wall
0.84 ½ 0.109 ... 0.294 0.083 ... ... ... 0.147 0.147 ... ... 0.188 0.109
1.05 ¾ 0.113 ... 0.308 0.083 ... ... ... 0.154 0.154 ... ... 0.219 0.113
1.315 1 0.133 ... 0.358 0.109 ... ... ... 0.179 0.179 ... ... 0.25 0.133
1.66 1 ¼ 0.14 ... 0.382 0.109 ... ... ... 0.191 0.191 ... ... 0.25 0.14
1.9 1 ½ 0.145 ... 0.4 0.109 ... ... ... 0.2 0.2 ... ... 0.281 0.145
2.375 2 0.154 ... 0.436 0.109 ... ... ... 0.218 0.218 ... ... 0.344 0.154
2.875 2 ½ 0.203 ... 0.552 0.12 ... ... ... 0.276 0.276 ... ... 0.375 0.203
3.5 3 0.216 ... 0.6 0.12 ... ... ... 0.3 0.3 ... ... 0.438 0.216
4 3 ½ 0.226 ... 0.636 0.12 ... ... ... 0.318 0.318 ... ... ... 0.226
4.5 4 0.237 ... 0.674 0.12 ... ... ... 0.337 0.337 0.438 ... 0.531 0.237
5.563 5 0.258 ... 0.75 0.134 ... ... ... 0.375 0.375 0.5 ... 0.625 0.258
6.625 6 0.28 ... 0.864 0.134 ... ... ... 0.432 0.432 0.562 ... 0.719 0.28
8.625 8 0.322 0.25 0.875 0.148 0.812 0.594 0.406 0.5 0.5 0.719 0.277 0.906 0.322
10.75 10 0.365 0.25 1 0.165 1 0.719 0.5 0.5 0.594 0.844 0.307 1.125 0.365
12.75 12 0.406 0.25 1 0.18 1.125 0.844 0.562 0.5 0.688 1 0.33 1.312 0.375
14 14 0.438 0.312 ... 0.25 1.25 0.938 0.594 0.5 0.75 1.094 0.375 1.406 0.375
16 16 0.5 0.312 ... 0.25 1.438 1.031 0.656 0.5 0.844 1.219 0.375 1.594 0.375
18 18 0.562 0.312 ... 0.25 1.562 1.156 0.75 0.5 0.938 1.375 0.438 1.781 0.375
20 20 0.594 0.375 ... 0.25 1.75 1.281 0.812 0.5 1.031 1.5 0.5 1.969 0.375
22 22 ... ... .... 0.25 .... ... ... 0.5 ... .... ... .... 0.375
24 24 0.688 0.375 .... 0.25 2.062 1.531 0.969 0.5 1.219 1.812 0.562 2.344 0.375
26 26 .... .... .... .... .... .... .... 0.5 .... .... .... .... 0.375
30 30 .... 0.5 .... 0.312 .... .... .... 0.5 .... .... 0.625 .... 0.375
36 36 0.75 0.5 .... 0.312 .... .... .... 0.5 .... .... 0.625 .... 0.375
40 40 .... .... .... .... .... .... .... 0.5 .... .... .... .... 0.375
42 42 …….. …….. …….. …….. …….. …….. …….. 0.5 …….. …….. …….. …….. 0.375
48 48 …….. …….. …….. …….. …….. …….. …….. 0.5 …….. …….. …….. …….. 0.375

SA 182 F22 CL3 Socket Weld Flange for Sale

1/2 Inch, 150 LB, RF, F22 Alloy Steel Tongue & Groove Flanges 8 Inch, 150 LB, SCH 80, Raised Face, A182 Grade F22 Spectacle Blind Flanges
8 Inch, 300 LB, FF, Low Alloy Steel ASTM A182 F22 Forged Flanges 1 Inch, CL600, ASTM A182 F22 Cl.2 Plate Flanges
2 Inch, SCH 40, ASME B16.48, A182 F22 Raised Face Flanges 8 Inch, 600#, RF, A182 F22 Alloy Steel Ring Type Joint Flanges
DN150, Class 900, SCH 80, ASME SA 182 Gr F22 Slip On Flanges 2 Inch x NPTF 1-1/2 Inch, SA182 F22 Reducing Flanges
10 Inch, Class 600, RF, A182 Grade F22 Socket Weld Flanges 6 Inch, SCH 40, 300#, ASTM A182 Gr F22 Weld Neck Flanges
8 Inch, Raised Face, Class 300, ASTM A182 Grade F22 Blind Flanges 8 Inch, SCH40, F22A182 F22 Class 2 Bleed Ring
4 Inch, 150 LB, Raised Face End, A182 F22 Class 2 Lap Joint Flanges 12 Inch, Class 300, Alloy Steel Long Weld Neck Flanges
8 Inch, 600 LB, SCH 80, ASTM A182 F22 Threaded Flanges 2 Inch, Class 600, SA182 F22 Cl1 Male and Female Flange

Alloy Steel F22 Threaded Flanges Chemical Composition

Mn Cr C P Si S Mo
0.3-0.6 8-10 0.15 max 0.03 0.5-1.0 0.03 0.9-1.1

A182 F22 CL3 Blind Flange exporter in India, Buy various type of Chrome Moly Alloy A182 F22 Flanges in form such as BLRF, SORF, SWRF, WNRF

A182 F22 CL3 Blind Flange Mechanical Properties

Yield Proerties Tensile Properties Elongational
585 (0.2 % Offset) 380 20 %

Chrome Moly Alloy A182 F22 Flanges Equivalent Material

WERKSTOFF NR. UNS DIN
1.7380 K21590 10CRM0910

Check our reference of material in these countries

Phase 3 Dubai Canal Extension Project, Dubai, UAE

Phase 3 Dubai Canal Extension Project, Dubai, UAE

Petrovietnam Vietnam

Petrovietnam Vietnam

Adco Jebel Dhanna Crude Storage Tanks

Adco Jebel Dhanna Crude Storage Tanks


Forest Exploration International (Pty) Ltd -- South Africa

Forest Exploration International (Pty) Ltd -- South Africa

Markmore Energy (Labuan) Ltd-Malaysia

Markmore Energy (Labuan) Ltd-Malaysia

Sap Hana Environment Technology Qatar

Sap Hana Environment Technology Qatar