Inconel 625 Forged Fittings Manufacturers in India

Inconel 625 Forged Fittings Manufacturers in India, Manufacturer of Inconel 625 Forged Fittings, 625 Inconel Forged Fittings Manufacturers in India, Inconel 625 Forged Tee, Inconel 625 Forged Coated Fitting, Inconel 625 Forged Concentric Reducer, Inconel 625 Forged Stub End, Inconel 625 Forged Tee Reducing, Inconel 625 Forged Barrel Nipples Manufacturers in India ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Inconel 625 Forged Fittings

Alloy 625 Forged Fittings, Inconel 625 Forged Fittings Suppliers in India, Suppliers of Inconel 625 Forged Fittings, Alloy 625 Forged pipe Fittings, Inconel 625 Forged Fittings, Inconel Alloy Forged Fittings Suppliers, UNS N06625 Forged Pipe Fittings Manufacturers, ASTM B366 Forged Pipe Fittings, Werkstoff No 2.4856 Forged Pipe Fittings , Inconel 625 Seamless/Seam Welded Forged Pipe Fittings, Inconel 625 Fabricated Forged Fittings, Inconel 625 Forged Pipe Fittings Manufacturers, Suppliers in India & Middle East

Ramesh Steel Corporation is specialized in manufacturing and supplying of Inconel 625 Forged Fittings , Pipe Fitting, Forged Fittings, Butt weld fittings in Stainless steel, alloy Steel & carbon Steel since 1991, we manufacture wide range of Inconel 625 Forged Fittings such as Inconel 625 Forged Elbows, Inconel 625 Forged Tees, Inconel 625 Forged Reducers, Inconel 625 Forged pipe end Caps, Inconel 625 Forged Pipe Bends etc. as per International standard like ASME/ASTM/API, we are supplying & exporting Inconel 625 Forged Fittings in seamless & welded both forms to more than 60 countries for over 2 decades, we have our dealers & distributors in Nigeria, Australia, Malaysia, Egypt, South Africa, Tanzania, Kenya, Mozambique, Angola, Gabon Germany, Turkey, France, United Kingdom, Italy, Netherlands, Iran , Iraq , Saudi Arabia, United Arab Emirates , Iisrael, Jordan, Oman, Kuwait, Qatar, Bahrain, Bangladesh, China, Indonesia, South Korea, Pakistan, Philippines, Singapore, Sri Lanka, Thailand, Vietnam, Brazil, Colombia, Argentina & United States of America, Ramesh Steel corporation is the only company in INDIA which is approved Manufacturer & supplier of Inconel 625 Forged Fittings in 300 top companies worldwide. Few of them are ORPIC, NIORDC, Saudi Aramco, SABIC, PIDMCO, GASCO, KNPC, Indian Oil, BPCL, HPCL, NTPC, BARC & Indian Navy, Ramesh Steel Corporation is ISO 9001:2008, ISO 14001, OHSAS 18001 Certified Company since 2006 & PED approved Manufacturer since 2008, Ramesh Steel is India's 6th largest Manufacturer, supplier & exporter of Inconel 625 Forged Fittings .

Infrastructure :

Ramesh Steel Corporation is 6th largest Inconel 625 Forged Fittings & Flanges manufacturers in INDIA. we have following latest automated machines to manufacture Inconel 625 Forged Fittings : Induction Elbow Making Machines, Bulge Forming Machine, Pipe Bending Machine, Elbow Cold Forming Machine, Induction Elbow Machine, Hydraulic Pressing Machine, Elbow and Pipe Bending Machine, Beveling Machine, we have largest Four-Column Hydraulic Press in INDIA which is used for pipe bending, pipe fitting press forming, metal sheet stretching and pulling. Now Ramesh Steel corp . is INDIA's largest Engineering & Forging Company related to Petro-Chemical and Oil & Gas Industry.


Inconel 625 Forged Fittings

Inconel 625 Forged Fittings


Inconel 625 Forged Fittings Size & Specification :

Size ⅛" to 4"
Grade Inconel 600 (UNS No. N06600), Inconel 601 (UNS No. N06601), Inconel 625 (UNS No. N06626), Inconel 800 (UNS No. N08800), Inconel 800H (UNS No. N08810), Inconel 825 (UNS No. N08825).
Standard ASTM / ASME SB 564 / 160 / 472.
Dimensions ANSI/ASME B16.11 & BS3799, etc.
Class 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.
Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT
Form Tee, Union, Full Coupling, Half Coupling,Elbow 45 Deg & 90 Deg, Swage Nipple, Cross, Cap, Plug Bush

Nickel Alloys Tradename UNS no. Werkstoff No. Density (8.8 g/cm3)
Alloy 625 Inconel 625 N06625 2.4856 8.44

Available Types of Inconel 625 Forged Fittings

Inconel 625 Socket Weld Fittings
Inconel 625 Threaded Fittings

Types of Inconel Forged Fittings :

» Inconel 600 Forged Fittings » Inconel 800 Forged Fittings
» Inconel 601 Forged Fittings » Inconel 800H Forged Fittings
» Inconel 625 Forged Fittings » Inconel 800HT Forged Fittings
» Inconel 718 Forged Fittings » Inconel 825 Forged Fittings
» Inconel X-750 Forged Fittings » Incoloy 330 Forged Fittings

Available Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Form

Inconel 625 Forged Fitting
UNS N06625/Inconel 625/alloy 625/NS336/2.4856 Forged fittings
Manufacturers various shapes nickel alloy inconel 625 forged fittings
  • Inconel 625 Forged Fitting
    FOB Price: US $10-3800 / Piece
UNS N06625/Inconel 625/alloy 625/NS336/2.4856 Forged fittings
FOB Price: US $10-1000 / Kilogram
Manufacturers various shapes nickel alloy inconel 625 forged fittings
FOB Price: US $30-80 / Kilogram
inconel 625 forged pipe fittings
high quality inconel 625 forged pipe fittings, steel forged pipe fittings
alloy inconel 625 forged fittings
inconel 625 forged pipe fittings
FOB Price : US $9-18 / Kilogram
high quality inconel 625 forged pipe fittings, steel forged pipe fittings
FOB Price: US $5.8-30 / Piece
alloy inconel 625 forged fittings
FOB Price: US $30-80 / Kilogram
alloy 625/inconel 625 forged fittings with high quality
Inconel 625 Forged Steel Fittings
Inconel 625 UNS N06625 forged fittings elbow
alloy 625/inconel 625 forged fittings with high quality
FOB Price: US $1-1000 / Piece
Inconel 625 Forged Steel Fittings
FOB Price: US $100.0-100.0 / Pieces
Inconel 625 UNS N06625 forged fittings elbow
FOB Price:US $500-1500 / Piece
Inconel 625 UNS N06625 forged fittings elbow
special nickle alloy inconel 625 forged fittings
ASTM B564 Inconel 625 Forged Fittings
Inconel 625 UNS N06625 forged fittings elbow
FOB Price: US $500-1500 / Piece
special nickle alloy inconel 625 forged fittings
FOB Price: US $3-30 / Piece
ASTM B564 Inconel 625 Forged Fittings
FOB Price:
US $10-3800 / Piece
Inconel 625 3000lbs Special Material Forged Fittings
Inconel 625 Alloy Steel Forged Tee Threaded Fittings
ANSI B16.11 Inconel 625 Forged Tee forged Fittings
Inconel 625 3000lbs Special Material Forged Fittings
FOB Price: US $1.0 / Piece 
Inconel 625 Alloy Steel Forged Tee Threaded Fittings
FOB Price: US $1.0 / Piece 
ANSI B16.11 Inconel 625 Forged Tee forged Fittings
FOB Price: US $100.0-100.0 / Pieces

Ramesh Steel Corporation is a leading manufacturer and exporter of high nickel based special alloy forged pipe fittings. Generally seamless forged pipe fittings (Alloy 625 forged Fittings ) are available in the size range of ½” NB to 8″ NB. For sizes above 8″NB, we offer our customers with seam welded 100% radiography tested Inconel 625 forged fittings. Ramesh Steel Corporation offers a complete range of Inconel 625 forged fittings such as Inconel 625 forged reducer, Inconel 625 forged elbow, Inconel 625 forged tee, Inconel 625 forged cross, Inconel 625 forged stub ends and Inconel 625 forged bends. We are specialise in the manufacturers and supply of Inconel forged bends in both standard and non standard sizes, with bending radius of 1D to 10D.

Alloy 625 forged Fittings or Inconel 625 forged Fittings, is a non-magnetic nickel-chromium alloy and is widely referred as UNS N06625 forged Fittings, while Inconel 625 forged Fittings is a nickel-chromium alloy, with an addition of aluminum. Inconel 625 forged Fittings exhibits excellent resistance to high temperature oxidation. Inconel 625 forged Fittings, a nickel-chromium-molybdenum alloy, is another super alloy which widely used in chemical processing, marine engineering, petrochemical and oil and gas offshore industries. Overall, Inconel 625 forged fittings and flanges exhibit excellent corrosion resistance and mechanical properties in the most demanding environments.

Ramesh Steel Corporation also stocks and supplies a complete range of Inconel 625 forged Fittings to complement our existing production range of forged fittings and flanges. Inconel 625 forged Fittings can be supplied in cut to length sizes and also machined or fabricated to meet your piping requirements. Inconel 625 forged fittings are especially suitable for chemical process industry, industrial heating equipment, marine engineering, offshore oil and gas platforms, pulp and paper manufacturing and nuclear industries.


Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Material Specfication and Dimension Standards :

Product Category Material Specification as per ASME/ASTM Dimension Standards
High Pressure Forged Fittings ASME SB564/564M Inconel 625, ASTM B564/564M Inconel 625 ASME B16.11, ANSI B16.11

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Size Range :

Sizes 3000# 6250# & 9000#
ELBOWS & TEES upto 4" upto 2"
Unions & Couplings upto 4" upto 2"
Plugs and Caps upto 4" upto 2"

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Other Product Names(Equivalent) :

UNS Nos Other Names
UNS N06625 ALLOY 625, W.NR 2.4856, Inconel alloy 625

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Forms :

90 Degree Elbow 45 Degree Elbow Equal Tee Unequal/Reducing Tee Equal Cross Unequal/Reducing Cross
Coupling (Half, Full) Caps Hex Nipples Pipe Nipples Plugs Hex Head Plugs
Round Head Plugs Square Head Plugs Unions  

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings : Production Range

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Grade Inconel 625 (UNS N06625, Alloy 625, 2.4816)
Type Seamless / Welded / Fabricated
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½”NB to 24″NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.

Types of Inconel 625 Forged Fittings / Alloy 625 Forged Fittings :

  Socket Weld Fittings   Screwed-Threaded Fittings
 
» Inconel 625 Forged 90 Deg Socket weld Elbow » Inconel 625 Forged 90 Deg Screwed-Threaded Elbow
» Inconel 625 Forged 45 Deg Socket weld Elbow » Inconel 625 Forged 45 Deg Screwed-Threaded Elbow
» Inconel 625 Forged Socket weld Equal Tee » Inconel 625 Forged Screwed-Threaded Equal Tee
» Inconel 625 Forged Socket weld Unequal Tee » Inconel 625 Forged Screwed-Threaded Unequal Tee
» Inconel 625 Forged Socket weld Equal Cross » Inconel 625 Forged Screwed-Threaded Equal Cross
» Inconel 625 Forged Socket weld Unequal Cross » Inconel 625 Forged Screwed-Threaded Unequal Cross
» Inconel 625 Forged Socket weld Half coupling » Inconel 625 Forged Screwed-Threaded Half coupling
» Inconel 625 Forged Socket weld Full coupling » Inconel 625 Forged Screwed-Threaded Full coupling
» Inconel 625 Forged Socket weld Pipe Outlet Fittings » Inconel 625 Forged Screwed-Threaded Cap
» Inconel 625 Forged Socket weld Pipe Cap » Inconel 625 Forged Screwed-Threaded Plug
» Inconel 625 Forged Socket weld Union » Inconel 625 Forged Screwed-Threaded Bushing
» Inconel 625 Forged Socket weld Reducer Insert » Inconel 625 Forged Screwed-Threaded Hex Nipples
» Inconel 625 Forged Socket weld Boss » Inconel 625 Forged Street Elbows
» Inconel 625 Forged Socket weld Branch Outlet » Inconel 625 Forged Welding Boss
» Inconel 625 Forged Socket weld Elbow Outlet » Inconel 625 Forged Union BS 3799
» Inconel 625 Forged Socket weld Swage Nipples | Pipe Swage » Inconel 625 Forged Swage Nipple

High Pressure Forged Inconel 625 Forged Fittings / Alloy 625 Forged Fittings :

Threaded and Socket Weld Pipe Fittings

Products Size
Inconel 625 Forged 90° Elbows Inconel 625 Forged Couplings Sizes 1/8″ – 4″
Pressure Ratings –
2000 LBS, 3000 LBS, 6250 LBS, 9000 LBS
Inconel 625 Forged 45° Elbows Inconel 625 Forged Reducers
Inconel 625 Forged Street Elbows Inconel 625 Forged Inserts
Inconel 625 Forged Tees Inconel 625 Forged Caps
Inconel 625 Forged Crosses Inconel 625 Forged Unions

ANSI B16.11 Inconel 625 Forged Pipe Fittings, DIN 2.4816 Inconel 625 Forged Elbow, Inconel 625 Forged Tee, Inconel 625 Coupling Manufacturers in india.

Standard Inconel 625
UNS N06625
WERKSTOFF NR. 2.4856
AFNOR NC22DNB4M
JIS NCF 625
GOST ХН75МБТЮ
BS NA 21
EN NiCr22Mo9Nb
OR ЭИ602

Types of Inconel 625 Forged Fittings / Alloy 625 Forged Fittings :


Inconel 625 Forged Equal Cross
Inconel 625 Forged 1.5D Elbow
Inconel 625 Forged Reducing Cross
Inconel 625 Forged Outlet Tees and Crosses
Inconel 625 Forged 90° Long Radius Elbow
Inconel 625 Forged Concentric/Eccentric Reducer
Inconel 625 Forged 90° Short Radius Elbow
Inconel 625 Forged Reducer
Inconel 625 Forged End Cap/Pipe Cap
Inconel 625 Forged 1D Elbow/3D Elbow/5D Elbow
Inconel 625 Forged Lap Joint Stub Ends
Inconel 625 Forged Lateral Tee
Inconel 625 Forged Reducing Tee
Inconel 625 Forged Short Stubend/Long Stubend
Inconel 625 Forged Collar
Inconel 625 Forged Straight Tees
Inconel 625 Forged Straight Crosses
Inconel 625 Forged Swedge Nipple/Pipe Nipple/Reducing Nipple
Inconel 625 Forged Piggable Bend
Inconel 625 Forged Barrel Nipple
Inconel 625 Forged 45° Long Radius Elbow
Inconel 625 Forged 180° Long Radius Elbow
Inconel 625 Forged 45° Short Radius Elbow
Inconel 625 Forged 180° Short Radius Elbow

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Price


Our Specialization in Below Inconel 625 Forged Fittings / Alloy 625 Forged Fittings :

  •   Inconel 625 forged fittings suppliers
  •   Inconel 625 forged fittings welded
  •   Inconel 625 forged fittings manufacturers
  •   Inconel 625 welded forged fittings
  •   Inconel 625 forged fittings manufacturer
  •   Inconel 625 forged fittings pressure rating
  •   Industrial Inconel 625 forged fittings
  •   Inconel 625 UNS N06625 forged fittings
  •   Inconel 625 Forged Pipe Fittings
  •  Customized Forged Inconel 625 Pipe Fittings
  •  high quality Inconel 625 Forged Fittings
  •   Manufacturers of Inconel 625 forged Fittings
  •   Inconel 625 forged Fittings & Flanges
  •   Inconel 625 Forged Threaded Fittings
  •   Special Inconel 625 forged Fittings
  •   Inconel 625 Threaded Fittings suppliers
  •   Inconel 625 Forged Socket Weld Pipe Fittings
  •   Inconel 625 Forged Fittings UNS N06625
  •   Industrial Fittings Inconel 625 forged fittings
  •   ASME B16.11 Inconel 625 Forged Fittings
  •   Exporter of Inconel 625 Forged Fittings
  •   wide range of High quality Inconel 625 forged fittings
  •   High quality Inconel 625 forged fittings
  •   Manufacturers Special Inconel 625 forged Fittings
  •  Manufacturer & supplier of high strength Inconel 625 Forged Fittings
  •   Inconel 625 Socket Weld Threaded Forged Fittings
  •   size variation of Inconel 625 Steel Forged Fittings
  •   ASTM B564 Inconel 625 Forged Fittings
  •   UNS N06625 / Inconel 625 Forged Fittings
  •   Manufacturer of Inconel 625 Forged Pipe Fittings
  •   Custom Inconel 625 Forged Fittings
  •   Inconel 625 Screwed forged fittings
  •   Competitive Price Factory Customized Inconel 625 forged Fittings, Elbow 90 Degree
  •   Inconel 625 High Pressure Forged Fittings
  •   Top quality Inconel 625 forged fittings
  •  Inconel 625 Forged Fittings Price
  •   Inconel 625 UNS N06625 Threaded Forged Fittings
  •   manufacturers & exporters Inconel 625 forged fittings
  •   Inconel 625 Alloy Threaded and Socketweld Forged Pipe Fittings
  •   Leading Industrial Inconel 625 Forged Fittings
  •   Inconel 625 Threaded Forged Fittings
  •   Inconel 625 DIN 2.4816, 2.4851, 2.4856, 2.4668 Forged Threaded Fittings

Inconel 625 / Alloy 625

Inconel nickel chromium alloy 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F.
Strength of Inconel alloy 625 is derived from the stiffening effect with molybdenum and columbium on its nickel-chromium matrix, thus hardening treatments are not required. This combination of chemical elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.
The inconel 625 versatile and outstanding corrosion resistance under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. Because of its ease of fabrication, it is made into a variety of element and component for plant equipment. Its high strength enables it be used, for example, in thinner-walled vessels or tubing than possible with other materials, thus improving heat transfer and saving weight. Some applications requiring the combination of corrosion resistance and strength offered by Inconel alloy 625 are tubing, reaction vessels, distillation columns, heat exchangers, transfer piping and valves.


Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - ASTM Specifications :

ALLOY Forging Fitting / Fittings
INCONEL 625 ASTM B564 ASTM B366

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Dimensions :

Form of Forged FittingsTypes of Forged Fittings fittings Size Range Dimension Standards
Tees and ElbowsSocket Weld & Threaded1/4" NB to 4" NB in Class 2000 , 3000, 6250, 9000ASME B16.11, ANSI B16.11
Unions and Couplings
Caps and Plugs
Cross

Type Of Inconel 625 Forged Fittings Available At Best Price

Inconel 625 Forged 45 Deg Elbow

Inconel 625 Forged 45 Deg Elbow

Inconel 625 Forged 90 Deg Elbow

Inconel 625 Forged Fittings Forged 90 Deg Elbow

Inconel 625 Forged Bushing

Inconel 625 Forged Bushing

Inconel 625 Forged Cap

Inconel 625 Forged Cap

Inconel 625 Forged Cross

Inconel 625 Forged Cross

Inconel 625 Forged Full coupling

Inconel 625 Forged Full coupling

Inconel 625 Forged Half coupling

Inconel 625 Forged Half coupling

Inconel 625 Forged Hex Bushing

Inconel 625 Forged Hex Bushing

Inconel 625 Forged Hex Nipple

Inconel 625 Forged Hex Nipple

Inconel 625 Forged Fittings

Inconel 625 Forged Fittings

Inconel 625 Forged plug

Inconel 625 Forged plug

Inconel 625 Forged Tee

Inconel 625 Forged Tee

Inconel 625 Forged Unequal Cross

Inconel 625 Forged Unequal Cross

Inconel 625 Forged Unequal Tee

Inconel 625 Forged Unequal Tee

Inconel 625 Forged Union BS3799

Inconel 625 Forged Union BS3799

Inconel 625 Forged Street Elbows

Inconel 625 Forged Street Elbows

Inconel 625 Forged Swage Nipple

Inconel 625 Forged Swage Nipple

Inconel 625 Forged Welding Boss

Inconel 625 Forged Welding Boss

Inconel 625 Forged Union

Inconel 625 Forged Union

Inconel 625 Forged Fittings

Inconel 625 Forged Fittings


Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Useful Info

Fitting Class Fitting Connection
2000
Threaded
3000
Threaded
6250
Threaded
3000
Socket-Weld
6250
Socket-Weld
9000
Socket-Weld

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Manufacturing Standards :

  • ASME B16.11 – Socket Welding and Threaded Forged Fittings
  • MSS SP-95 – Swage(d) Nipples and Bull Plugs
  • BS3799 – Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Chemical Composition

C Si Mn P S Ni+Co Cr Cu Fe
0.15 0.5 1.0 0.015 72.0 14.0~ 17.0 0.5 6.0~ 10.0

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Mechanical Properties

0.2% proof stress [MPa] min Tensile strength [MPa] min Elongation [%] min Hardness [HB] max
240 550 30 88

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings - Physical Properties

Density                                                        8.51 [g/cm3]
Specific heat                                               444 [J/kg . K]
Electrical resistivity                                      103 [μΩ . cm]
Thermal conductivity                                   15.0 [W/m . K]
Average coefficient of thermal expansion  
25~  93°C 13.3 [10-6/°C]
25~316°C 14.2
25~538°C 15.1
25~760°C 16.0
25~982°C 16.7
Young’s modulus                                        21.4 × 104 [MPa]
Curie point                                                   -124 [°C]
Magnetism None
Melting range                                            1370~1410  [°C]

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Application

  •  Inconel 625 Forged Fittings Used in Pulp and paper manufacturing plants
  •  Inconel 625 Forged Fittings Used in Chemical processing equipment
  •  Inconel 625 Forged Fittings Used in Petrochemical processing equipment
  •  Inconel 625 Forged Fittings Used in Textile machinery and equipment
  •  Inconel 625 Forged Fittings Used in Vessels and tanks
  •  Inconel 625 Forged Fittings Used in desulfurization
  •  Inconel 625 Forged Fittings Used in Chemical procedures
  •  Inconel 625 Forged Fittings Used in Medical field
  •  Inconel 625 Forged Fittings Used in Pharmaceutical plants
  •  Inconel 625 Forged Fittings Used in Food processing plants
  •  Inconel 625 Forged Fittings Used in Aviation engine components

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Value Added Services :

  •  Inconel 625 Forged Fittings Cutting
  •  Inconel 625 Forged Fittings Forming
  •  Inconel 625 Forged Fittings Bevelling
  •  Inconel 625 Forged Fittings Machining
  •  Inconel 625 Forged Fittings Heat Treatment
  •  Inconel 625 Forged Fittings Pickling
  •  Inconel 625 Forged Fittings Final Inspection
  •  Inconel 625 Forged Fittings Marking

Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Application Industry

  •  Inconel 625 Forged Fittings Used In Fertilizers Industry
  •  Inconel 625 Forged Fittings Used In Aerospace Industry
  •  Inconel 625 Forged Fittings Used In Nuclear Power Plant Industry
  •  Inconel 625 Forged Fittings Used In Chemical Industry
  •  Inconel 625 Forged Fittings Used In Oil & Gas Industry
  •  Inconel 625 Forged Fittings Used In Refineries Industry
  •  Inconel 625 Forged Fittings Used In Petrochemical Industry
  •  Inconel 625 Forged Fittings Used In Paper Industry

Key Properties of Inconel 625 Forged Fittings / Alloy 625 Forged Fittings

  • High corrosion resistance in tough environments
  • Lower intergranular precipitation
  • High resistance to pitting and crevice corrosion


Forged Fitting Type

    forged steel pipe fittings introduction

Forged Steel Pipe Fitting What is a forged steel pipe fittings ?Forged steel pipe fittings are hot formed sections with different types for high pressure pipe fittings, they ar ...


    Pipe Bushing Hex Head and Flsuhing-Forged Threaded Pipe Fittings

Pipe Bushing Hex Head and FlsuhingBushing a cylindrical or conical part of a machine, mechanism, or instrument, which has an axial opening into which another part fits. Dependi ...


    Pipe Nipples, Swaged Nipples-Forged Pipe Fittings

Alloy Steel Socket Weld and Threaded Swaged Nipplepipe nipple is a length of straight pipe with male threads on both ends. It is one of the most popular category of pipe fittin ...


    Pipe Plugs-Hexagonal/Round/Square Head Plug, BSP Pipe Plugs

This plug is used to close off the end of a pipe. It is similar to a cap but it fits inside the fitting it is mated to. In a threaded iron pipe plumbing system, plugs have male ...


    Pipe Union:Hex Head Socket Weld Union and Thread Union

carbon steel and stainless steel thread unionA pipe union is a secure and semi-permanent connection between two pipes. Most pipe unions consist of two pipes connected together ...


    Socket Weld End Cap-Forged Steel Pipe Fittings

ASTM A182 F316L Stainless Steel Pipe End CapSocket Weld fittings generalA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, f ...


    Socket Weld Steel Cross-Forged Steel Pipe Fitting

Stainless Steel Socket Weld CrossSocket Weld fittings generalA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or f ...


    Socket Weld Steel Elbow 90/180 Degrees-Forged Steel Pipe Fittings

Socket Weld fittings generalA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fi ...


    Socket Weld Tee-Forged Steel Pipe Fittings

Socket Weld fittings generalA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fi ...


    Street Elbow-Forged Steel Pipe Fittings

Stainless Steel 304 Street ElbowA street elbow (sometimes called a street ell or service ell) is a type of plumbing or piping fitting intended to join a piece of pipe and anoth ...


    Threaded Elbow 45/90 Degree-Forged Steel Pipe Fittings

Definition and Details of Threaded Fittings ASME B16.11Threaded Fittings generalThreaded joints probably represent the oldest method of joining piping systems. Like Socket Weld ...


    Thread Steel Tee-Forged Steel Fittings

Definition and Details of Threaded Fittings ASME B16.11Threaded Fittings generalThreaded joints probably represent the oldest method of joining piping systems. Like Socket Weld ...


    Threaded Cross-Forged Steel Pipe Fittings

Threaded CorssThreaded Corss-Threaded Fittings generalThreaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittin ...


    Threaded Full/Half Couplings-Forged Carbon Steel Fittings

Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided with a swaged-on adapter carrying the necessary means to connec ...



Forged Fitting Standard

    ASME B16.11 Forged Pipe Fittings, Socket-Welding and Threaded

ASME B16.11 – Forged Fittings, Socket-Welding and ThreadedASME B16.11 – Forged Fittings, Socket-Welding and Threaded1 SCOPE1.1 GeneralThis Standard covers ratings, dimens ...


    BS 1740 Wrought Forged Steel Pipe Fittings (Screwed BS 21 R-s ...

BS 1740 – wrought steel pipe fittings (screwed BS 21 R-series thread). Metric units This British Standard is the official English language version of EN 10241:2000. It su ...


    BS 3799 screwed and socket-welding pipe fittings for the petr ...

1.1 Scope This British Standard specifies requirements for forged carbon and alloy steel screwed and socket-welding fittings for use in the petroleum and petrochemical industry ...


    JIS B2316 Steel Socket-welding pipe fittings

JIS B2316 Socket Weld 45 Deg ElbowJIS B2316 Socket Weld 90 Deg ElbowJIS B2316 Socket Weld Y TeeJIS B2316 Socket Weld TeeJIS B2316 Socket Weld CapJIS B2316 Socket Weld CrossJIS ...


    MSS SP-83 Steel Pipe Unions Socket Welding and Threaded

MSS SP-83 Socket Welding and Threaded Steel Pipe Unions1 .SCOPE1.1 This Standard Practice establishes envelope and other essential dimensionals, finish, tolerances, testing, ma ...


    MSS SP-95 Swaged Nipples and Bull Plugs

MSS SP-95 Threaded Swaged Nipples1.1 This standard covers dimensions, finish, tolerances, marking and material for carbon steel and alloy steel Swaged Nipples (male end reducin ...


    MSS SP-97 Forged Branch Outlet Fittings-Socket Welding,Thread ...

1. SCOPE1.1 This Standard Practice covers essential dimensions, finish, tolerances, testing, marking, material, and minimum strength requirements for 90 and 45 degree integrall ...



Forged Fitting Material

    ASTM A234 WP11 Alloy Steel Pipes Fittings for Moderate and Hi ...

ASTM A234 WP11 Alloy Steel ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applications in ...


    ASTM A234 WP22 Alloy Steel Pipes Fittings for Moderate and Hi ...

ASTM A234 WP22 90 Deg Large Radius Elbow ASME B16.9ASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typi ...


    ASTM A234 WP5 Alloy Steel Pipes Fittings for Moderate and Hig ...

ASTM A234 WP5 Alloy Steel 45 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applicati ...


    ASTM A234 WP9 Alloy Steel Pipes Fittings for Moderate and Hig ...

ASTM A234 WP9 Alloy Steel 45 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applicati ...


    ASTM A234 WPL6 Alloy Steel Pipes Fittings for Moderate and Hi ...

ASTM A234 WPL6 Alloy Steel 45 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applicat ...


    DIN ST35.8 Boiler tube Mechanical Property &Chemical Components

Din 17175 ST 35.8 seamless steel tubes for boiler1. DIN 17175 ST 35.8 Seamless Steel Tubes for Boiler Industry Heat-resisting seamless steel tube, used for the pipelines of boi ...


    EN 10025-2 S235JR : European standard for hot-rolled structur ...

S235JR steel plate is one mainly of Carbon and low alloy steel, S235JR steel plate is a type of steel sheet under EN standard which is used to build ship, bridge, belongs to hi ...


    EN P235GH European specified steel for use in pressure vessel ...

P235GH is a European specified steel for use in pressure vessels, boilers and heat exchangers. The composition of this steel makes it ideal for applications where elevated work ...


    EN P265GH weldable non-alloy quality pressure vessel steel

Stocks of boiler plate steel ready to be supplied as plate, cut plate, or profiles (cut shapes) and certified to EN 10028:2 P265GH are available from Brown McFarlane Limited. E ...


    EN P355GH Steel for heat-resistant pressure vessels

P355GH steel plate, EN10028 P355GH steel plates is a kind of material for boiler and pressure vessel steel. EN10028 P355GH steel plates is characterised by a minimum yield stre ...


    GB 20 carbon seamless steel for pipe fittings

GB 20 Carbon Steel ElbowThis group of Chinese (GB) standard specifications covers carbon and alloy steel plates and forgings used in boilers and pressure vessels, high-strength ...


    GB Q345 low-alloy high-tensile structural steel

GB Q345/ASTM A572 Gr50 Alloy Structural Steel Square BarPlace of Origin:Hebei,China Brand Name:Haihao GroupShape:square bar Material:Alloy Structural SteelSteel Grade: ATSM A57 ...


    JIS G3101 General Structure Hot Rolled SS400 Steel

JIS G3101 SS400 JIS G3101 SS400 steel plate/sheet, under JISG3101 standard, we can regard SS400 steel plate/sheet for general purpose structural steel.JIS G3101 SS400 is a tech ...


    ST52-3 NBK DIN 2393 Welded Precision Steel Tubes

DIN 2393 ST52-3 steels is a low alloy, high strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, ST52-3 steel possesse ...



Forged Fitting Dimension

    ASME B16.11 Bushing-Hex Head Bushing and Flush Bushing Dimension

ASME B16.11 Hex Head Bushing ASME B16.11 Flush BushingUHex Head BushingFlush BushingDNNPSA(Length)F(Width Flat)G(Hex Height)WeightVolumeWeightVolume81/4”111630.010.005*10-30.00 ...


    ASME B16.11 Hex Head Plug

ASME B16.11 Hex Head Plug DNNPSA(Length)E(Diameter of head)D(Length)WeightVolume61/8”1010350.020.004*10-381/4”1114410.050.009*10-3103/8”1318410.080.014*10-3151/2”1421440.1 ...


    ASME B16.11 Socket Weld 45 Deg Elbow

pressureDNNPSABDC(Ave)C(Min)GJClass 300061/8″810.86.93.183.182.419.5Class 300081/4″814.29.33.783.33.029.5Class 3000103/8″817.612.64.013.53.29.5Class 3000151/2 ...


    ASME B16.11 Socket Weld Cap Dimensions

ASME B16.11 Socket Weld CapA Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fit ...


    ASME B16.11 Socket Weld Tee Cross Dimensions

Socket Weld Tee Dimensions Socket Weld 90°Elbow、Tee、Cross DimensionsClassDNNPSABDC(Ave)C(Min)GJ300061/8″1110.86.93.183.182.419.5 81/4″1114.29.33.783.33.029.5 ...


    ASME B16.11 Square Head Plug

DNNPSA(Length)B(Height of Square)WeightVolume61/8”1060.010.002*10-381/4”1160.020.004*10-3103/8”1380.030.007*10-3151/2”14100.060.012*10-3203/4”16110.100.020*10-3251”19130.180.03 ...


    ASME B16.11 Threaded/Screwed 45 Deg Elbow

pressureDNNPSC(Center to End)D(O.D)G(Min Thickness)B(Length of Thread)L2(Length of Thread)Class 200061/8″17223.186.46.7Class 200081/4″17223.188.110.2Class 2000103/8 ...


    ASME B16.11 Threaded Elbow/Screwed Elbow

pressureDNNPSADGBJClass 200061/8″21223.186.46.7Class 200081/4″21223.188.110.2Class 2000103/8″25253.189.110.4Class 2000151/2″28333.1810.913.6Class 200020 ...


    ASME B16.11 Threaded/Screwed Cap

pressureDNNPSP(Center to End)D(Outside Diameter)G(Wall Thickness)B(Length of Thread)L2(Length of Thread)Class 300061/8″19164.86.46.7Class 300081/4″25194.88.110.2Cla ...


    ASME B16.11 Threaded/Screwed Coupling

pressureDNNPSW(Center to End)D(Outside Diameter)G(Wall Thickness)B(Length of Thread)L2(Length of Thread)WeightVolumeClass 300061/8”32164.86.46.70.060.009*10-3Class 300081/4”351 ...


    ASME B16.11 Threaded/Screwed Street Elbow

pressureDNNPSHAJG1G2BL2LClass 300061/8”1919253.182.746.46.710Class 300081/4”2522323.33.228.110.211Class 3000103/8”3225383.53.59.110.413Class 3000151/2”3828414.094.1610.913.614C ...


    MSS SP-83 Threaded/Screwed Union

A pipe union is a secure and semi-permanent connection between two pipes. Most pipe unions consist of two pipes connected together via a third piece. All three are threaded to ...


    MSS SP-95 Swaged Pipe Nipples Dimensions

MSS SP-95 swage nipples dimensionsMSS SP-95 Swaged Nipples and Bull Plugs covers dimensions, finish, tolerances, marking and material for carbon steel and alloy steel Swaged Ni ...


    MSS SP-97 Sockolet-forged pipe fittings

 pressureNPSABCDEClass 30001/2″25.435.7123.0115.814.28Class 30003/4″26.9843.6529.3620.9314.28Class 30001″33.3350.836.5126.6419.84Class 30001 1/4″33.3365 ...


    MSS SP-97 Thredolet-Threaded forged pipe fittings

pressureNPSABCClass 30001/2″25.435.7123.81Class 30003/4″26.9843.6529.36Class 30001″33.3350.836.51Class 30001 1/4″33.3365.0844.45Class 30001 1/2″34 ...



Inconel 625 Forged Fittings / Alloy 625 Forged Fittings Project Reference List

PROJECT NAME / CUSTOMER RAMESH STEEL CORPORATION GRADES LOCATION YEAR
GAS AND CONDENSATE EXPORT SYSTEM Inconel 625 Forged Fittings AND BRANCH OUTLETS BW – SW A182 F316L – A182F44
A182 F44 , A312S31254, A182 F316L,
A105.N, A105 HDG, A350 LF2, A106
Gr.B, A106 Gr.B HDG , A333 Gr.6, A234 WPB
KUWAIT 2015
GAS DEVELOPMENT PROJECT Inconel 625 Forged Fittings, BRANCH OUTLETS INCOLOY 825 INDONESIA 2015
INDORAMA Inconel 625 Forged Fittings AND BRANCH OUTLETS BW – SW – THRD A105 – A350 LF2 – A106B- A333 GR6 – A234 WPB – A420 WPL6 – A182 F304L THE NETHERLANDS 2015
QUALITY STAMP TRADING -SAUDI ARAMCO Inconel 625 Forged Fittings , BRANCH OUTLETS SW A105, A105 GALV, A350 LF2, A182F304L,
A182F316L, A403 WP316L, A182F321,
A182F44, A182F5, CU90/10 UNS C70610
SAUDI ARABIA 2014-2015
REFINERY OFF GAS PROJECT Inconel 625 Forged Fittings, BRANCH OUTLETS BW-THRD, NIP OUTLETS A105, A105 HDG A350 LF2, A182 F304/
304L, A182F316/316L, A182F11,
A105N, A106B, A234WPB, A333
BELGIUM 2014-2015
MA’ADEN WA’AD AL SHAMAL PHOSPHATE Inconel 625 Forged Fittings AND BRANCH OUTLETS SW-BW A350LF2, F304L, F316L, F904L,
A182F60, ALLOY20
A105N, A106B, A234WPB,
SAUDI ARABIA 2014-2015
OIL AND GAS INC Inconel 625 Forged Fittings AND BRANCH OUTLETS BW UNS NO 6625 BRAZIL 2014
SHIDDIRGANG PROJECT Inconel 625 Forged Fittings, BRANCH OUTLETS BW-SW-THRD   BANGLADESH 2014
SAUDI ARABIAN MINING COMPANY Inconel 625 Forged Fittings AND BRANCH OUTLETS SW – BW A105, A105 GALV, A350LF2A182F304L,
A182F316L
SAUDI ARABIA 2014
GAS TURBINE POWER PLANT PROJECT Inconel 625 Forged Fittings AND BRANCH OUTLETS SW A105, A182F316L IRAQ 2014
GRUPO CUNADO FORGED STEEL FITTINGS A105,A182F304L, A182F316L,F321, TURKEY 2013-2014
ALSTOM FORGED STEEL FITTINGS AND BRANCH OUTLETS A105, A182F304L, A182F316L

MOROCCO, SOUTH AFRICA

2010
NORTH WEST REDWATER Inconel 625 Forged Fittings SW & NPT A350LF2,A420WPL6,
A182F304L-F316L,WP304L,HAST,C276
CANADA 2014-2015
CANADA NWR PROJECT Inconel 625 Forged Fittings , BRANCH OUTLETS SW & NPT F304L/316L/317L/347H/321H
F11/F22/ UNS08825
CANADA 2014-2015
DENIZ 2 PROJECT Inconel 625 Forged Fittings SW & NPT A 105, A105 GALVA, A350LF2, A333 Gr6,
A234WPB-A420WPL6, F304L, WP304L
AZERBAIJAN 2014
ADMA OPCO ABU DHABI Inconel 625 Forged Fittings, BRANCH OUTLETS BW-THRD, LATERAL, OUTLETS A694 F52, A182F321, A182F316, A105.N,
A312TP316L, A312 TP321, A182 F53
SUPER DUPLEX
UAE 2014
SAUDI ARAMCO HOLLAND Inconel 625 Forged Fittings CuNi 9010 SAUDI ARABIA 2014
MISSAN OIL Comp.PETROCHINA IRAQ API COUPLINGS L80 IRAQ 2014
SAUDI ARAMCO Inconel 625 Forged Fittings, BRANCH OUTLETS BW-SW-THRD MONEL 400, A182 F5, A182F316L,
A182F304L, A105
SAUDI ARABIA 2014


We have Supplied Inconel 625 Forged Fittings / Alloy 625 Forged Fittings to below Countries

To buy Inconel 625 Forged Fittings At best price & urgent delivery please mail to info@rameshgroup.com , As we have Our Dealer, Distributors & Direct Sales Representatives in below Countries who will help you to buy Alloy 625 Forged Fittings & will resolve your queries On 625 Inconel Forged Fittings.

Malaysia Angola Netherlands
Nigeria Gabon Iran
Egypt Germany Iraq
South Africa Turkey United Arab Emirates
Tanzania France israel
Kenya United Kingdom Jordan
Algeria Italy Oman
Uganda Philippines Kuwait
Ghana Singapore Qatar
Mozambique Sri Lanka China
Morocco Thailand Indonesia
Saudi Arabia Vietnam Japan
Canada United States Pakistan
Mexico  


Inconel 625 Forged Fittings, best quality Inconel 625 Forged Fittings, India’s largest Inconel 625 Forged Fittings manufacturer, wide variety of Inconel 625 Forged Fittings, Inconel 625 Forged Fittings India, Inconel 625 Forged Fittings distributor Mumbai, Inconel 625 Forged Fittings traders, prime quality Inconel 625 Forged Fittings, Source for Inconel 625 Forged Fittings, specialize in Inconel 625 Forged Fittings, Inconel 625 Forged Fittings with Test Certificate, Inconel 625 Forged Fittings at dealer price.