Super Duplex Steel UNS S32750 Buttweld fittings Manufacturers in India

Super Duplex Steel UNS S32750 Butt-weld Fittings manufacturer, Super Duplex Steel UNS S32750 Buttweld Elbow, Super Duplex Steel UNS S32750 Buttweld Tee, Super Duplex Steel UNS S32750 Buttweld cap, Super Duplex Steel UNS S32750 Buttweld Cross Fitting, Super Duplex Steel UNS S32750 Buttweld Tee Reducing, Super Duplex Steel UNS S32750 Buttweld Coated Fitting, Manufacturers in India ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313 Super Duplex Steel UNS S32750 Buttweld Pipe Fittings.

Super Duplex Steel UNS S32750 Buttweld Fittings manufacturers, Super Duplex Steel UNS S32750 Buttweld Fittings suppliers, UNS S32750 Super Duplex Steel buttweld fittings manufacturer, ASTM A815 Super Duplex Steel buttweld pipe fittings, Super Duplex Steel UNS S32750 Seamless/Seam Welded Buttweld Fittings, Super Duplex Steel UNS S32750 Fabricated B/W Fittings, Super Duplex Steel UNS S32750 Buttweld Fittings Suppliers in Indonesia, UAE, Saudi Arabia, Oman, Qatar, Australia.

Ramesh Steel Corporation is specialized in manufacturing and supplying of Super Duplex Steel UNS S32750 Buttweld fittings , Pipe Fitting, Forged Fittings, Butt weld fittings in Stainless steel, alloy Steel & carbon Steel since 1991, we manufacture wide range of Super Duplex Steel UNS S32750 Butt weld fittings such as Super Duplex Steel UNS S32750 Buttweld Elbows, Super Duplex Steel UNS S32750 Buttweld Tees, Super Duplex Steel UNS S32750 Buttweld Reducers,Super Duplex Steel UNS S32750 Buttweld pipe end Caps, Super Duplex Steel UNS S32750 Buttweld Pipe Bends etc. as per International standard like ASME/ASTM/API, we are supplying & exporting Super Duplex Steel UNS S32750 Buttweld fittings in seamless & welded both forms to more than 60 countries for over 2 decades, we have our dealers & distributors in Nigeria, Australia, Malaysia, Egypt, South Africa, Tanzania, Kenya, Mozambique, Angola, Gabon Germany, Turkey, France, United Kingdom, Italy, Netherlands, Iran , Iraq , Saudi Arabia, United Arab Emirates , Iisrael, Jordan, Oman, Kuwait, Qatar, Bahrain, Bangladesh, China, Indonesia, South Korea, Pakistan, Philippines, Singapore, Sri Lanka, Thailand, Vietnam, Brazil, Colombia, Argentina & United States of America, Ramesh Steel corporation is the only company in INDIA which is approved Manufacturer & supplier of Super Duplex Steel UNS S32750 Buttweld fittings in 300 top companies worldwide. Few of them are ORPIC, NIORDC, Saudi Aramco, SABIC, PIDMCO, GASCO, KNPC, Indian Oil, BPCL, HPCL, NTPC, BARC & Indian Navy, Ramesh Steel Corporation is ISO 9001:2008, ISO 14001, OHSAS 18001 Certified Company since 2006 & PED approved Manufacturer since 2008, Ramesh Steel is India's 6th largest Manufacturer, supplier & exporter of Super Duplex Steel UNS S32750 Buttweld fittings .

Infrastructure :

Ramesh Steel Corporation is 6th largest Super Duplex Steel UNS S32750 Butt weld fittings & Flanges manufacturers in INDIA. we have following latest automated machines to manufacture Super Duplex Steel UNS S32750 Buttweld fittings : Induction Elbow Making Machines, Bulge Forming Machine, Pipe Bending Machine, Elbow Cold Forming Machine, Induction Elbow Machine, Hydraulic Pressing Machine, Elbow and Pipe Bending Machine, Beveling Machine, we have largest Four-Column Hydraulic Press in INDIA which is used for pipe bending, pipe fitting press forming, metal sheet stretching and pulling. Now Ramesh Steel corp . is INDIA's largest Engineering & Forging Company related to Petro-Chemical and Oil & Gas Industry.


Super Duplex Steel UNS S32750 Butt weld fittings

Super Duplex Steel UNS S32750 Butt weld fittings


Specifications of Super Duplex Steel UNS S32750 Butt weld fittings

Standards :

ASTM / ASME SA 815 UNS S32750

Type

:

Seamless / Welded

Schedule

:

Sch 5 to Sch XXS.

Size

:

1/2" to 36"


Chemical Composition of Super Duplex Steel UNS S32750 Butt weld fittings :

UNS No Grade C Si Mn P S Cr Mo Ni N Other
S32750 2507 0.030 0.80 1.20 0.035 0.020 24.0/26.0 3.0/5.0 6.00/8.00 0.24/0.32 Cu:0.50

Mechanical Properties of Super Duplex Steel UNS S32750 Butt weld fittings :

UNS No

Grade

Proof Stress
0.2% (MPa)

Tensile Strength
(MPa)

Elongation
A5(%)

Hardness Max

HB

HRB

S32750

2507

550

795

15

310

32*


Type of Super Duplex Steel UNS S32750 Buttweld Fittings :

Super Duplex Steel UNS S32750 Butt weld Fittings
Super Duplex Steel UNS S32750 Pipe Fittings
Super Duplex Steel Butt weld Fittings
Super Duplex Steel Pipe Fittings
UNS S32750 Butt weld Fittings
UNS S32750 Pipe Fittings

» 3D Elbow » Pipe Cap
» 5D Elbow » End Cap
» Tee, Equal Tee » Swedge Nipple
» Unequal/Reducing Tee » Barrel Nipple
» Reducer » Reducing Nipple
» Concentric Reducer » Bend
» Eccentric Reducer » Long Radius Bend
» Stub End » Piggable Bend
» Long Stubend » Equal Cross
» Short Stubend » Unequal Cross

Applications of Super Duplex Steel UNS S32750 Buttweld Fittings :

Electronics
Transport and traffic
Pulp and paper industry
Medicine
Fertilizers
Valve & Pumps
Petrochemical
Architecture and construction
Aerospace
Nuclear Power
Energy industry
Chemicals industry
Nickel Alloy in Pulp and Paper
Motor industry
Food and drink


Type Of Super Duplex Steel UNS S32750 Buttweld fittings Available At Best Price

Super Duplex Steel UNS S32750 Buttweld cap

Super Duplex Steel UNS S32750 Buttweld cap

Super Duplex Steel UNS S32750 Buttweld Cross Fitting

Super Duplex Steel UNS S32750 Buttweld Cross Fitting

Super Duplex Steel UNS S32750 Buttweld 4way fittings

Super Duplex Steel UNS S32750 Buttweld 4way fittings

Super Duplex Steel UNS S32750 Buttweld wye reducing

Super Duplex Steel UNS S32750 Buttweld wye reducing

Super Duplex Steel UNS S32750 Buttweld wye standard

Super Duplex Steel UNS S32750 Buttweld wye standard

Super Duplex Steel UNS S32750 Buttweld Tee Reducing

Super Duplex Steel UNS S32750 Buttweld Tee Reducing

Super Duplex Steel UNS S32750 Buttweld Tee Bullhead

Super Duplex Steel UNS S32750 Buttweld Tee Bullhead

Super Duplex Steel UNS S32750 Buttweld Outlet Tee

Super Duplex Steel UNS S32750 Buttweld Outlet Tee

Super Duplex Steel UNS S32750 Buttweld Outlet Elbow

Super Duplex Steel UNS S32750 Buttweld Outlet Elbow

Super Duplex Steel UNS S32750 Buttweld Pipe Return Trap

Super Duplex Steel UNS S32750 Buttweld Pipe Return Trap

Super Duplex Steel UNS S32750 Buttweld Eccentric Reducer

Super Duplex Steel UNS S32750 Buttweld Eccentric Reducer

Super Duplex Steel UNS S32750 Buttweld Reducer Concentric

Super Duplex Steel UNS S32750 Buttweld Reducer Concentric

Super Duplex Steel UNS S32750 Buttweld Expansion joint

Super Duplex Steel UNS S32750 Buttweld Expansion joint

Super Duplex Steel UNS S32750 Buttweld Elbow Reducing

Super Duplex Steel UNS S32750 Buttweld Elbow Reducing

Super Duplex Steel UNS S32750 Buttweld 180 degree Elbow

Super Duplex Steel UNS S32750 Buttweld 180 degree Elbow

Super Duplex Steel UNS S32750 Buttweld Elbow 90 Degre

Super Duplex Steel UNS S32750 Buttweld Elbow 90 Degre

Super Duplex Steel UNS S32750 Buttweld Elbow 45 Degree

Super Duplex Steel UNS S32750 Buttweld Elbow 45 Degree

Super Duplex Steel UNS S32750 Buttweld Tee Standard

Super Duplex Steel UNS S32750 Buttweld Tee Standard

Super Duplex Steel UNS S32750 Buttweld Elbow Fittings

Super Duplex Steel UNS S32750 Buttweld Elbow Fittings

Super Duplex Steel UNS S32750 Buttweld Pipe fittings

Super Duplex Steel UNS S32750 Buttweld Pipe fittings

Super Duplex Steel UNS S32750 Buttweld Barrel Nipple

Super Duplex Steel UNS S32750 Buttweld Barrel Nipple

Super Duplex Steel UNS S32750 Buttweld Barrel Nipples

Super Duplex Steel UNS S32750 Buttweld Barrel Nipples

Stub End

Super Duplex Steel UNS S32750 Buttweld Stub End

Super Duplex Steel UNS S32750 Buttweld Lap Joint Stub Ends

Super Duplex Steel UNS S32750 Buttweld Lap Joint Stub Ends

Super Duplex Steel UNS S32750 Buttweld Coated Fitting

Super Duplex Steel UNS S32750 Buttweld Coated Fitting




ButtWeld Fitting Type

   Butt Weld Elbows 45, 90 and 180 degrees-Butt Weld Pipe Fittings

Seamless Carbon Steel ElbowElbows 45° – 90° – 180° LR/SRThe function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportuni ...


   Butt weld fitting: Butt Weld Stub End

A Stub End always will be used with a Lap Joint flange, as a backing flange; both are shown on the image below. This flange connections are applied, in low-pressure and non cri ...


   Butt Weld Pipe Fittings-butt welding pipe fittings

Barred Tee. Definition: What is a butt welding pipe fitting?Butt welding is a connecting method of welding . There are no parallel and overlap in this welding technique.This pr ...


   Butt Welding Weldolet-Butt Weld Pipe Fittings

Stainless Steel Butt Welding WeldoletWeldolet is the most common of all branch connections, and is welded onto the outlet pipe. The ends are bevelled to facilitate this process ...


   Pipe Cap Manufacturing Method : Deep Drawing

Pipe Cap Manufacturing Method : Deep DrawingOne of the most common manufacturing methods for caps, where plate is cut out in a circle and formed by deep drawing.Deep drawing is ...


   Pipe End Cap-Butt Weld Pipe Fittings

carbon steel pipe capButtweld fitting:Butt Weld CAPBasically a cap will be applied, to shut down the end of a pipe. The Cap, as it is shown in the image below, is available for ...


   Pipe Swage Nipple-Butt Weld Pipe Fittings

Swage Nipples Definition:A pipe nipple is a length of straight pipe with male threads on both ends. It is one of the most popular category of pipe fittings. It is a connector o ...


   Reducer Concentric and Eccentric-Butt Weld Pipe Fittings

Stainless Steel ReducerButt Weld fitting:Reducer Concentric and EccentricReducers be applied, to change from pipe diameter in one direction. Standard there are 2 possibilities, ...


   Seamless Elbow Manufacturing Method : Cold Bending

Seamless Carbon Steel Elbow Cold bending is a quick and inexpensive bending method. It is a competitive option for making pipelines and machine parts, for instance. Using ...


   Seamless Elbow Manufacturing Method : Heat Bending

 Seamless Carbon Steel ElbowHeat Bending : One of the most common manufacturing methods for manufacturing Elbows from pipes. After heating the raw material, it is pushed o ...


   Seamless Reducer Manufacturing Method : Pressing Stereotype

Concentric and Eccentric Reducer Reducers be applied, to change from pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually ...


   Seamless Tee Manufacturing Method : Hot-drawing Forming

Butt Weld Seamless Tee The hot-extrusion process consists of enclosing a piece of metal, heated to forging temperature, in a chamber called a “container” havin ...


   Seamless Tee Manufacturing Method : Push Stereotype

 Seamless Tee The primary purpose of a Tee is to make a 90° branch from the main run of pipe. Standard there are 2 possibilities, on behalf of the equal tee and reduc ...


   Small Dimension Welded Elbow Manufacturing Method : Pressing ...

Small Dimension Welded ElbowThe function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45°, 90° and 180° elbows, all ...


   Stub End Manufacturing Method : Pressure Molding

Stub End Made by Pressure MoldingA Stub End always will be used with a Lap Joint flange, as a backing flange; both are shown on the image below. This flange connections are app ...


   Tees and Crosses Straight and Reducing-Butt Weld Pipe Fittings

carbon steel equal teeTees straight and reducingThe primary purpose of a Tee is to make a 90° branch from the main run of pipe. Standard there are 2 possibilities, on behalf of ...


   Welded Large Dimension Elbow Manufacturing Method : Pressing ...

Welded Large Dimension Elbow Made by Pressing StereotypeThe function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45 ...


    Welded Reducer Manufacturing Method : Pressure Molding

Reducer Concentric and EccentricButt Weld fitting:Reducer Concentric and EccentricReducers be applied, to change from pipe diameter in one direction. Standard there are 2 possi ...



Butt Weld Fitting Standard

      ANSI/ASME B16.28 Butt Weld Elbow 90/180 Deg Short Radius

1 SCOPE 1.1 General This Standard covers ratings, overall dimensions, testing, tolerances, and markings for wrought carbon and alloy steel buttwelding short radius elbows and r ...


   ASME B16.49 Butt welding Induction Bends for Transportation a ...

This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for factory-made tangent pipe bends of carbon steel materials having control ...


   ANSI/ASME B16.25 - Buttwelding Ends

This Standard covers the preparation of buttwelding ends of piping components to be joined into a piping system by welding. It includes requirements for welding bevels, for ext ...


   ASME/ANSI B16.9 – Factory-Made Wrought Steel Buttwelding Fittings

ASME/ANSI B16.9 – Factory-Made Wrought Steel Buttwelding Fittings1.Scope:1.1 GeneralThis Standard covers overall dimensions, tolerances, ratings, testing, and markings for fact ...


   BS 1640 Steel Butt-Welding Pipe Fittings for the Petroleum In ...

DIN EN 10253-1 Butt-welding pipe fittings – Part 1: Wrought carbon steel for general use and without specific inspection requirementsThe document specifies requirements f ...


   BS 1965 Carbon steel Butt-Welding Pipe Fittings For Pressure ...

Our fittings are all manufactured in line with BS1965 (EN 10253) requirements. The material for Elbows and Reducers is seamless or ERW tube to BS3602 Grade 430. The material fo ...


   DIN 2605 butt-welding pipe fittings Elbows and bends

This standard specifies seamless and welded steel elbows and bends that are intended to be butt welded to pipes. Although the wall thicknesses specified correspond to those of ...


   DIN 2616 Steel Butt-Welding Pipe Fittings:Eccentric Reducer

Concentric reducers – DIN 2616 part 2 Seamless carbon steel concentric reducers to DIN 2616-part 2, manufactured from seamless carbon steel pipe St 35.8 class I to DIN 17 ...


   DIN 2615 Steel butt-welding pipe fittings Tees

Tees are pipe fittings that are used to delivery lines to feed certain appliances and pieces of equipment.You can get types of tee in various measurements and specifications,wi ...


   DIN 2617 Pipe End Caps butt-welding pipe fittings

DIN 2617 Caps introduction DIN 2617 Caps are made of materials as HII, 15Mo3, 13CrMo44, 10CrMo910, 1.4541, 1.4571 according to DIN 2617, DIN 2609(reference), with DN15-DN300 in ...


   EN 10253-1 Butt-welding pipe fittings Wrought carbon steel

Fittings: the following standards are replaced by DIN EN 10253DIN 2605 ElbowsDIN 2615 TeesDIN 2616 ReducersDIN 2617 CapsDIN EN 10253-1 Butt-welding pipe fittings – Part 1 ...


   EN 10253-2 Butt-welding pipe fittings Non alloy and ferritic ...

Fittings: the following standards are replaced by DIN EN 10253DIN 2605 ElbowsDIN 2615 TeesDIN 2616 ReducersDIN 2617 CapsDIN EN 10253-1 Butt-welding pipe fittings – Part 1 ...


   GOST 17375 - Sharply curved bends type 3D (R ≈ 1,5 DN)

GOST 17375 – Sharply curved tangent pipe bends type 3D (R ≈ 1,5 DN) The bend intends for smooth changing the direction of the pipeline.3D (R=1,5 DN), θ=900С, second perfo ...


   GOST 17376 Butt Weld Tees : Seamless and Welded,Carbon Steel ...

GOST 17376 – Seamless welded pipeline parts from carbon and low alloy steel TEESGOST 17376 equal and reducing teeDNDTD1T1FHМасса. кг15 2.021.32.025250.1921.33.23.20.30 4. ...


   GOST 17378 Butt-Welding Fittings Reducers Carbon and low-allo ...

GOST 17378 – Carbon and low-alloy steel butt-welding fittings. ReducersConcentric and Eccentric ReducersDuring construction of pipelines it is inevitable that problems re ...


   JIS B 2311 Steel butt-welding pipe fittings for ordinary use

Butt Weld 45 Deg Lr Elbow Butt Weld 90 Deg Lr Elbow Butt Weld 90 Deg Sr Elbow Butt Weld 180 Deg Lr Elbow Butt Weld 180 Deg Sr Elbow Butt Weld Cap Butt Weld Concentric Reducer T ...


   JIS B 2312 Steel butt-welding pipe fittings

Butt Weld 45 Deg Lr Elbow Butt Weld 90 Deg Lr Elbow Butt Weld 90 Deg Sr Elbow Butt Weld 180 Deg Lr Elbow Butt Weld 180 Deg Sr Elbow Butt Weld Long Cap Butt Weld Short Cap Butt ...


   JIS B2313 Steel plate butt-welding pipe fittings

Butt Weld 45 Deg Lr Elbow Butt Weld 90 Deg Lr Elbow Butt Weld 90 Deg Sr Elbow Butt Weld 180 Deg Lr Elbow Butt Weld 180 Deg Sr Elbow Butt Weld Concentric Reducer Type 1 Butt Wel ...


   MSS SP-43 Wrought and Fabricated Butt-Welding Fittings

1.SCOPE 1.1 This Standard Practice provides dimensions, tolerances, and markings for butt-welding fittings for low pressure, corrosion resistant applications.1.2 This Standard ...


   MSS SP75 Butt-Welding Fittings Wrought High-Strength Low-Allo ...

1.SCOPE 1.1 This specification covers factory-made, seamless and electric fusion-welded carbon and low-alloy steel, butt-welding fittings for use in high pressure gas and oil t ...



Butt Weld Fitting Material

   ASTM A105 Carbon Steel Forgings for Piping Applications

ASTM A105 Carbon Steel Butt Weld Pipe FittingsASTM A105 Carbon Steel is the most common forged material of group of materials under ASME/ANSI B16.5 standard (Pipe flanges and f ...


   ASTM A234 WP11 Alloy Steel Pipes Fittings for Moderate and Hi ...

ASTM A234 WP11 Alloy Steel ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applications in ...


   ASTM A234 WP22 Alloy Steel Pipes Fittings for Moderate and Hi ...

ASTM A234 WP22 90 Deg Large Radius Elbow ASME B16.9ASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typi ...


   ASTM A234 WP5 Alloy Steel Pipes Fittings for Moderate and Hig ...

ASTM A234 WP5 Alloy Steel 45 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applicati ...


   ASTM A234 WP9 Alloy Steel Pipes Fittings for Moderate and Hig ...

ASTM A234 WP9 Alloy Steel 45 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applicati ...


   ASTM A234 WPB Pipes Fittings of Wrought Carbon Steel and Allo ...

ASTM A234 WPB Carbon Steel 180 Deg ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applica ...


   ASTM A234 WPC Pipes Fittings of Wrought Carbon Steel and Allo ...

ASTM A234 WPC Carbon Steel ElbowASTM A234 refers to pipe fittings of wrought carbon steel and alloy steel for use in moderate and elevated temperatures. Typical applications in ...


   ASTM A403 WP304L Wrought Austenitic Stainless Steel Piping Fi ...

ASTM A403 WP304L Stainless Steel ASME B16.9 Butt Weld ElbowASTM A403 WP304L Wrought Austenitic Stainless Steel Piping Fittings 1. Scope :1.1 This specification covers wrou ...


   ASTM A403 WP316L Wrought Austenitic Stainless Steel Piping Fi ...

ASTM A403 WP316L Stainless Steel Elbow and CapASTM A403 WP316LWrought Austenitic Stainless Steel Piping Fittings1. Scope :1.1 This specification covers wrought stainless steel ...


   ASTM A403 WP321 Wrought Austenitic Stainless Steel Piping Fit ...

ASTM A403 WP321 Stainless Steel Flange Made in ChinaASTM A403 WP321 Wrought Austenitic Stainless Steel Piping Fittings1. Scope :1.1 This specification covers wrought stainless ...


   ASTM A860 WPHY52 Butt Welding Fittings Wrought High Strength ...

ASTM A860 WPHY52 Wrought High Strength Ferritic Steel Butt Welding TeeASTM A860/A860M-090 Standard Specification for Wrought High – Strength Ferritic Steel Butt – Welding Fitti ...


   ASTM A860 WPHY60 Butt Welding Fittings Wrought High Strength ...

ASTM A860 WPHY65 Butt Weld Elbows Tees ReducersASTM A860 WPHY60 Butt Welding Fittings Wrought High Strength Ferritic Steel1. Scope 1.1 This specification covers wrought high – ...


   ASTM A860 WPHY65 Butt Welding Fittings Wrought High Strength ...

ASTM A860 WPHY65 Butt Weld Elbows And ReducersASTM A860 WPHY65 Butt Welding Fittings Wrought High Strength Ferritic Steel1. Scope 1.1 This specification covers wrought high – s ...


   ASTM A860 WPHY70 Butt Welding Fittings Wrought High Strength ...

ASTM A860 WPHY70 Butt Welding ElbowASTM A860 WPHY70 Butt Welding Fittings Wrought High Strength Ferritic Steel1. Scope 1.1 This specification covers wrought high – strength fer ...


   DIN St 37-3 carbon structural steel

DIN St 37-3 N steel plate is a kind of carbon structural steel.DIN St 37-3 N steel plate Application:Structural steel is steel construction material, a profile, formed with a s ...


   GB 16Mn low-alloy high-tensile structural steel

The steel plate of 16Mn is applied to manufacture factory building, civil building and all kinds of engineering machinery in mine industry and various of civil construction, su ...


   GB Q235 ordinary structural carbon steel for pipe fittings

GB Q235 ordinary structural carbon steel plate for pipe,flange and pipe fittingsWhat is Q235,The difference between Q235A and Q235B?Ordinary carbon steel – General Board, ...


   GB Q345 low-alloy high-tensile structural steel

GB Q345/ASTM A572 Gr50 Alloy Structural Steel Square BarPlace of Origin:Hebei,China Brand Name:Haihao GroupShape:square bar Material:Alloy Structural SteelSteel Grade: ATSM A57 ...


   JIS G3101 General Structure Hot Rolled SS400 Steel

JIS G3101 SS400 JIS G3101 SS400 steel plate/sheet, under JISG3101 standard, we can regard SS400 steel plate/sheet for general purpose structural steel.JIS G3101 SS400 is a tech ...



Butt Weld Fitting Dimension

   ASME B16.9 Butt Weld 180 Deg Sr Elbow

NPSD(outer dimension)O(Center to Center)K(Back to Face)1″33.451411 1/4″42.264521 1/2″48.376622″60.3102812 1/2″731271003″88.91521213 1/2̸ ...


   ASME B16.9 Butt Weld 45 90 Deg Sr Elbow

NPSD(outer dimension)A(Center-to-End)1″33.4251 1/4″42.2321 1/2″48.3382″60.3512 1/2″73643″88.9763 1/2″101.6894″114.31025″14 ...


   ASME B16.9 Butt Weld 45 Deg 3D Elbow

NPSD(outer dimension)B(Center-to-End)1/2″21.3…3/4″26.7241″33.4311 1/4″42.2391 1/2″48.3472″60.3632 1/2″73793″88.9953 1/2 ...


   ASME B16.9 Butt Weld 45 Deg Lr Elbow Dimensions

ASME B16.9 Bw 45 Deg Lr ElbowNPSD(outer dimension)B(Center-to-End)1/2″21.3163/4″26.7191″33.4221 1/4″42.2251 1/2″48.3292″60.3352 1/2″73 ...


   ASME B16.9 Butt Weld 90 Deg Lr Elbow

NPSD(outer dimension)A(Center-to-End)1/2″21.3383/4″26.7381″33.4381 1/4″42.2481 1/2″48.3572″60.3762 1/2″73953″88.91143 1/2″ ...


   ASME B16.9 Butt Weld Cap

NPSD(outer dimension)H(Length)t(Wall Thickness)H1(Length)1/2″21.325.44.5725.43/4″26.725.43.8125.41″33.438.14.5738.11 1/4″42.238.14.8338.11 1/2″48. ...


   ASME B16.9 Butt Weld Equal Tee

NPSD(outer dimension)C(Center-to-End)M(Center-to-End)1/2″21.325253/4″26.729291″33.438381 1/4″42.248481 1/2″48.357572″60.364642 1/2″737 ...


   ASME B16.9 Butt Weld Reducer

NPSD(outer dimension)D1(outer dimension)H(Length)3/4×1/226.721.3381×1/233.421.3511×3/433.426.7511 1/4×1/242.221.3511 1/4×3/442.226.7511 1/4×142.233.4511 1/2×1/248.321.3641 1/2× ...


   ASME B16.9 Butt Weld Reducing Elbow

NPSLD(Large End)SD(Small End)A(Center to End)2×1 1/260.348.3762×1 1/460.342.2762×160.333.4762 1/2×27360.3952 1/2×1 1/27348.3952 1/2×1 1/47342.2953×2 1/288.9731143×288.960.31143 ...


   ASME B16.9 Butt Weld Reducing Tee

NPSD(outer dimension)D1(outer dimension)C(Center-to-End)M(Center-to-End)3/4×1/226.721.329291×1/233.421.338381×3/433.426.738381 1/4×1/242.221.348481 1/4×3/442.226.748481 1/4×142 ...


   ASME B16.9 Butt Weld 180 Deg Lr Elbow

NPSD(outer dimension)O(Center to Center)K(Back to Face)1/2″21.376483/4″26.776511″33.476561 1/4″42.295701 1/2″48.3114832″60.31521062 1/2̸ ...


   ASME B16.9 Stub Ends

A Stub End always will be used with a Lap Joint flange, as a backing flange; both are shown on the image below. This flange connections are applied, in low-pressure and non cri ...


   MSS SP-43 Stub End

A Stub End always will be used with a Lap Joint flange, as a backing flange; both are shown on the image below. This flange connections are applied, in low-pressure and non cri ...


   MSS SP-75 Butt Weld 45 Deg Lr Elbow

The function of a 45° elbow is the same as a 90° elbow, but the measurement of dimensions is different to that of the 90° elbow. The radius of a 45° elbow is the same as the ra ...


   MSS SP-75 Butt Weld Cap

Basically a cap will be applied, to shut down the end of a pipe. The Cap, as it is shown in the image below, is available for all pipe dimensions, and is sometimes also used fo ...


   MSS SP-75 Butt Weld Equal Tee

The primary purpose of a Tee is to make a 90° branch from the main run of pipe. Standard there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee ( ...


   MSS SP-75 Butt Weld Reducer

Reducers be applied, to change from pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually used in vertical pipe lines, and the ...


   MSS SP-75 Butt Weld Reducing Tee

When we talk about a tee NPS 3, a equal or straight tee is intended. With a tee NPS 3 x 2 a reducing tee is intended. Although, officially a reducing tee will be indicated by 3 ...


   MSS SP-75 Butt Weld R=3D Elbows

NPSOutside Diameter90°Elbow(Center to End)60°Elbow(Center to End)45°Elbow(Center to End)30°Elbow(Center to End)16164827.6919.8812.8818185431.1822.3814.4420206034.6224.8816.0622 ...


   MSS SP-97 Reducing Weldolet

Weldolet is the most common of all branch connections, and is welded onto the outlet pipe. The ends are bevelled to facilitate this process, and therefore the weldolet is consi ...


   MSS SP-97 Weldolet

Weldolet is the most common of all branch connections, and is welded onto the outlet pipe. The ends are bevelled to facilitate this process, and therefore the weldolet is consi ...





We have supplied Super Duplex Steel UNS S32750 Butt weld fittings to below countries

Malaysia Angola Netherlands
Nigeria Gabon Iran
Egypt Germany Iraq
South Africa Turkey United Arab Emirates
Tanzania France israel
Kenya United Kingdom Jordan
Algeria Italy Oman
Uganda Philippines Kuwait
Ghana Singapore Qatar
Mozambique Sri Lanka China
Morocco Thailand Indonesia
Saudi Arabia Vietnam Japan
Canada United States Pakistan
Mexico  


Super Duplex Steel UNS S32750 Butt weld fittings, best quality Super Duplex Steel UNS S32750 Butt weld fittings, India’s largest Super Duplex Steel UNS S32750 Butt weld fittings manufacturer, wide variety of Super Duplex Steel UNS S32750 Butt weld fittings, Super Duplex Steel UNS S32750 Butt weld fittings India, Super Duplex Steel UNS S32750 Butt weld fittings distributor Mumbai, Super Duplex Steel UNS S32750 Butt weld fittings traders, prime quality Super Duplex Steel UNS S32750 Butt weld fittings, Source for Super Duplex Steel UNS S32750 Butt weld fittings, specialize in Super Duplex Steel UNS S32750 Butt weld fittings, Super Duplex Steel UNS S32750 Butt weld fittings with Test Certificate, Super Duplex Steel UNS S32750 Butt weld fittings at dealer price.